[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220913142926.816746-1-horatiu.vultur@microchip.com>
Date: Tue, 13 Sep 2022 16:29:26 +0200
From: Horatiu Vultur <horatiu.vultur@...rochip.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <michael@...le.cc>,
<UNGLinuxDriver@...rochip.com>,
Horatiu Vultur <horatiu.vultur@...rochip.com>
Subject: [PATCH net-next v2] net: phy: micrel: Add interrupts support for LAN8804 PHY
Add support for interrupts for LAN8804 PHY.
Tested-by: Michael Walle <michael@...le.cc> # on kontron-kswitch-d10
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
---
v1->v2:
- add Tested-by and Reviewed-by tags
- add better comments
---
drivers/net/phy/micrel.c | 62 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 7b8c5c8d013e..6ec2d8fec78a 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -2676,6 +2676,66 @@ static int lan8804_config_init(struct phy_device *phydev)
return 0;
}
+static irqreturn_t lan8804_handle_interrupt(struct phy_device *phydev)
+{
+ int status;
+
+ status = phy_read(phydev, LAN8814_INTS);
+ if (status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (status > 0)
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
+#define LAN8804_OUTPUT_CONTROL 25
+#define LAN8804_OUTPUT_CONTROL_INTR_BUFFER BIT(14)
+#define LAN8804_CONTROL 31
+#define LAN8804_CONTROL_INTR_POLARITY BIT(14)
+
+static int lan8804_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ /* This is an internal PHY of lan966x and is not possible to change the
+ * polarity on the GIC found in lan966x, therefore change the polarity
+ * of the interrupt in the PHY from being active low instead of active
+ * high.
+ */
+ phy_write(phydev, LAN8804_CONTROL, LAN8804_CONTROL_INTR_POLARITY);
+
+ /* By default interrupt buffer is open-drain in which case the interrupt
+ * can be active only low. Therefore change the interrupt buffer to be
+ * push-pull to be able to change interrupt polarity
+ */
+ phy_write(phydev, LAN8804_OUTPUT_CONTROL,
+ LAN8804_OUTPUT_CONTROL_INTR_BUFFER);
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ err = phy_read(phydev, LAN8814_INTS);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, LAN8814_INTC, LAN8814_INT_LINK);
+ if (err)
+ return err;
+ } else {
+ err = phy_write(phydev, LAN8814_INTC, 0);
+ if (err)
+ return err;
+
+ err = phy_read(phydev, LAN8814_INTS);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
static irqreturn_t lan8814_handle_interrupt(struct phy_device *phydev)
{
int irq_status, tsu_irq_status;
@@ -3137,6 +3197,8 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = genphy_suspend,
.resume = kszphy_resume,
+ .config_intr = lan8804_config_intr,
+ .handle_interrupt = lan8804_handle_interrupt,
}, {
.phy_id = PHY_ID_KSZ9131,
.phy_id_mask = MICREL_PHY_ID_MASK,
--
2.33.0
Powered by blists - more mailing lists