| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <87a671bz8e.fsf@kurt>
Date: Wed, 14 Sep 2022 20:13:53 +0200
From: Kurt Kanzenbach <kurt@...utronix.de>
To: Vladimir Oltean <vladimir.oltean@....com>, netdev@...r.kernel.org
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Xiaoliang Yang <xiaoliang.yang_1@....com>,
Rui Sousa <rui.sousa@....com>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Michael Walle <michael@...le.cc>,
Vinicius Costa Gomes <vinicius.gomes@...el.com>,
Maxim Kochetkov <fido_max@...ox.ru>,
Colin Foster <colin.foster@...advantage.com>,
Richie Pearn <richard.pearn@....com>,
Vladimir Oltean <olteanv@...il.com>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Jamal Hadi Salim <jhs@...atatu.com>,
Cong Wang <xiyou.wangcong@...il.com>,
Jiri Pirko <jiri@...nulli.us>,
Gerhard Engleder <gerhard@...leder-embedded.com>,
Grygorii Strashko <grygorii.strashko@...com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 08/13] net: dsa: hellcreek: deny tc-taprio
changes to per-tc max SDU
On Wed Sep 14 2022, Vladimir Oltean wrote:
> Since the driver does not act upon the max_sdu argument (which it
> should, in full offload mode), deny any other values except the default
> all-zeroes, which means that all traffic classes should use the same MTU
> as the port itself.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
> ---
> drivers/net/dsa/hirschmann/hellcreek.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
> index ea8bbfce0f1f..8ef7816627b6 100644
> --- a/drivers/net/dsa/hirschmann/hellcreek.c
> +++ b/drivers/net/dsa/hirschmann/hellcreek.c
> @@ -1814,10 +1814,15 @@ static int hellcreek_port_setup_tc(struct dsa_switch *ds, int port,
> {
> struct tc_taprio_qopt_offload *taprio = type_data;
> struct hellcreek *hellcreek = ds->priv;
> + int tc;
>
> if (type != TC_SETUP_QDISC_TAPRIO)
> return -EOPNOTSUPP;
>
> + for (tc = 0; tc < TC_MAX_QUEUE; tc++)
> + if (taprio->max_sdu[tc])
> + return -EOPNOTSUPP;
I'd rather like to see that feature implemented :-). Something like below.
From 3d44683979bf50960125fa3005b1142af61525c7 Mon Sep 17 00:00:00 2001
From: Kurt Kanzenbach <kurt@...utronix.de>
Date: Wed, 14 Sep 2022 19:51:40 +0200
Subject: [PATCH] net: dsa: hellcreek: Offload per-tc max SDU from tc-taprio
Add support for configuring the max SDU per priority and per port. If not
specified, keep the default.
Signed-off-by: Kurt Kanzenbach <kurt@...utronix.de>
---
drivers/net/dsa/hirschmann/hellcreek.c | 61 +++++++++++++++++++++++---
drivers/net/dsa/hirschmann/hellcreek.h | 7 +++
2 files changed, 61 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 5ceee71d9a25..1b22710e1641 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -128,6 +128,16 @@ static void hellcreek_select_prio(struct hellcreek *hellcreek, int prio)
hellcreek_write(hellcreek, val, HR_PSEL);
}
+static void hellcreek_select_port_prio(struct hellcreek *hellcreek, int port,
+ int prio)
+{
+ u16 val = port << HR_PSEL_PTWSEL_SHIFT;
+
+ val |= prio << HR_PSEL_PRTCWSEL_SHIFT;
+
+ hellcreek_write(hellcreek, val, HR_PSEL);
+}
+
static void hellcreek_select_counter(struct hellcreek *hellcreek, int counter)
{
u16 val = counter << HR_CSEL_SHIFT;
@@ -1537,6 +1547,42 @@ hellcreek_port_prechangeupper(struct dsa_switch *ds, int port,
return ret;
}
+static void hellcreek_setup_maxsdu(struct hellcreek *hellcreek, int port,
+ const struct tc_taprio_qopt_offload *schedule)
+{
+ int tc;
+
+ for (tc = 0; tc < 8; ++tc) {
+ u16 val;
+
+ if (!schedule->max_sdu[tc])
+ continue;
+
+ hellcreek_select_port_prio(hellcreek, port, tc);
+
+ val = (schedule->max_sdu[tc] & HR_PTPRTCCFG_MAXSDU_MASK)
+ << HR_PTPRTCCFG_MAXSDU_SHIFT;
+
+ hellcreek_write(hellcreek, val, HR_PTPRTCCFG);
+ }
+}
+
+static void hellcreek_reset_maxsdu(struct hellcreek *hellcreek, int port)
+{
+ int tc;
+
+ for (tc = 0; tc < 8; ++tc) {
+ u16 val;
+
+ hellcreek_select_port_prio(hellcreek, port, tc);
+
+ val = (HELLCREEK_DEFAULT_MAX_SDU & HR_PTPRTCCFG_MAXSDU_MASK)
+ << HR_PTPRTCCFG_MAXSDU_SHIFT;
+
+ hellcreek_write(hellcreek, val, HR_PTPRTCCFG);
+ }
+}
+
static void hellcreek_setup_gcl(struct hellcreek *hellcreek, int port,
const struct tc_taprio_qopt_offload *schedule)
{
@@ -1720,7 +1766,10 @@ static int hellcreek_port_set_schedule(struct dsa_switch *ds, int port,
}
hellcreek_port->current_schedule = taprio_offload_get(taprio);
- /* Then select port */
+ /* Configure max sdu */
+ hellcreek_setup_maxsdu(hellcreek, port, hellcreek_port->current_schedule);
+
+ /* Select tdg */
hellcreek_select_tgd(hellcreek, port);
/* Enable gating and keep defaults */
@@ -1772,7 +1821,10 @@ static int hellcreek_port_del_schedule(struct dsa_switch *ds, int port)
hellcreek_port->current_schedule = NULL;
}
- /* Then select port */
+ /* Reset max sdu */
+ hellcreek_reset_maxsdu(hellcreek, port);
+
+ /* Select tgd */
hellcreek_select_tgd(hellcreek, port);
/* Disable gating and return to regular switching flow */
@@ -1814,15 +1866,10 @@ static int hellcreek_port_setup_tc(struct dsa_switch *ds, int port,
{
struct tc_taprio_qopt_offload *taprio = type_data;
struct hellcreek *hellcreek = ds->priv;
- int tc;
if (type != TC_SETUP_QDISC_TAPRIO)
return -EOPNOTSUPP;
- for (tc = 0; tc < TC_MAX_QUEUE; tc++)
- if (taprio->max_sdu[tc])
- return -EOPNOTSUPP;
-
if (!hellcreek_validate_schedule(hellcreek, taprio))
return -EOPNOTSUPP;
diff --git a/drivers/net/dsa/hirschmann/hellcreek.h b/drivers/net/dsa/hirschmann/hellcreek.h
index c96b8c278904..66b989d946e4 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.h
+++ b/drivers/net/dsa/hirschmann/hellcreek.h
@@ -37,6 +37,7 @@
#define HELLCREEK_VLAN_UNTAGGED_MEMBER 0x1
#define HELLCREEK_VLAN_TAGGED_MEMBER 0x3
#define HELLCREEK_NUM_EGRESS_QUEUES 8
+#define HELLCREEK_DEFAULT_MAX_SDU 1536
/* Register definitions */
#define HR_MODID_C (0 * 2)
@@ -72,6 +73,12 @@
#define HR_PRTCCFG_PCP_TC_MAP_SHIFT 0
#define HR_PRTCCFG_PCP_TC_MAP_MASK GENMASK(2, 0)
+#define HR_PTPRTCCFG (0xa9 * 2)
+#define HR_PTPRTCCFG_SET_QTRACK BIT(15)
+#define HR_PTPRTCCFG_REJECT BIT(14)
+#define HR_PTPRTCCFG_MAXSDU_SHIFT 0
+#define HR_PTPRTCCFG_MAXSDU_MASK GENMASK(10, 0)
+
#define HR_CSEL (0x8d * 2)
#define HR_CSEL_SHIFT 0
#define HR_CSEL_MASK GENMASK(7, 0)
--
2.30.2
Download attachment "signature.asc" of type "application/pgp-signature" (862 bytes)
Powered by blists - more mailing lists