lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220914085451.11723-2-arinc.unal@arinc9.com> Date: Wed, 14 Sep 2022 11:54:42 +0300 From: Arınç ÜNAL <arinc.unal@...nc9.com> To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, Rob Herring <robh+dt@...nel.org>, Matthias Brugger <matthias.bgg@...il.com>, Andrew Lunn <andrew@...n.ch>, Vivien Didelot <vivien.didelot@...il.com>, Florian Fainelli <f.fainelli@...il.com>, Vladimir Oltean <olteanv@...il.com>, "David S . Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Thomas Bogendoerfer <tsbogend@...ha.franken.de>, Greg Kroah-Hartman <gregkh@...uxfoundation.org>, Sean Wang <sean.wang@...iatek.com>, Landen Chao <Landen.Chao@...iatek.com>, DENG Qingfang <dqfext@...il.com>, Sergio Paracuellos <sergio.paracuellos@...il.com>, erkin.bozoglu@...ont.com Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org, linux-mips@...r.kernel.org, Arınç ÜNAL <arinc.unal@...nc9.com> Subject: [PATCH 01/10] dt-bindings: net: drop old mediatek bindings Remove these old mediatek bindings which are not used. Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com> --- .../bindings/net/mediatek,mt7620-gsw.txt | 24 -------- .../bindings/net/ralink,rt2880-net.txt | 59 ------------------- .../bindings/net/ralink,rt3050-esw.txt | 30 ---------- 3 files changed, 113 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt delete mode 100644 Documentation/devicetree/bindings/net/ralink,rt2880-net.txt delete mode 100644 Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt deleted file mode 100644 index 358fed2fab43..000000000000 --- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt +++ /dev/null @@ -1,24 +0,0 @@ -Mediatek Gigabit Switch -======================= - -The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621). - -Required properties: -- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw" -- reg: Address and length of the register set for the device -- interrupts: Should contain the gigabit switches interrupt -- resets: Should contain the gigabit switches resets -- reset-names: Should contain the reset names "gsw" - -Example: - -gsw@...10000 { - compatible = "ralink,mt7620-gsw"; - reg = <0x10110000 8000>; - - resets = <&rstctrl 23>; - reset-names = "gsw"; - - interrupt-parent = <&intc>; - interrupts = <17>; -}; diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt deleted file mode 100644 index 9fe1a0a22e44..000000000000 --- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt +++ /dev/null @@ -1,59 +0,0 @@ -Ralink Frame Engine Ethernet controller -======================================= - -The Ralink frame engine ethernet controller can be found on Ralink and -Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8). - -Depending on the SoC, there is a number of ports connected to the CPU port -directly and/or via a (gigabit-)switch. - -* Ethernet controller node - -Required properties: -- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth", - "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth", - "mediatek,mt7620-eth", "mediatek,mt7621-eth" -- reg: Address and length of the register set for the device -- interrupts: Should contain the frame engines interrupt -- resets: Should contain the frame engines resets -- reset-names: Should contain the reset names "fe". If a switch is present - "esw" is also required. - - -* Ethernet port node - -Required properties: -- compatible: Should be "ralink,eth-port" -- reg: The number of the physical port -- phy-handle: reference to the node describing the phy - -Example: - -mdio-bus { - ... - phy0: ethernet-phy@0 { - phy-mode = "mii"; - reg = <0>; - }; -}; - -ethernet@...000 { - compatible = "ralink,rt2880-eth"; - reg = <0x00400000 10000>; - - #address-cells = <1>; - #size-cells = <0>; - - resets = <&rstctrl 18>; - reset-names = "fe"; - - interrupt-parent = <&cpuintc>; - interrupts = <5>; - - port@0 { - compatible = "ralink,eth-port"; - reg = <0>; - phy-handle = <&phy0>; - }; - -}; diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt deleted file mode 100644 index 87e315856efa..000000000000 --- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt +++ /dev/null @@ -1,30 +0,0 @@ -Ralink Fast Ethernet Embedded Switch -==================================== - -The ralink fast ethernet embedded switch can be found on Ralink and Mediatek -SoCs (RT3x5x, RT5350, MT76x8). - -Required properties: -- compatible: Should be "ralink,rt3050-esw" -- reg: Address and length of the register set for the device -- interrupts: Should contain the embedded switches interrupt -- resets: Should contain the embedded switches resets -- reset-names: Should contain the reset names "esw" - -Optional properties: -- ralink,portmap: can be used to choose if the default switch setup is - llllw or wllll -- ralink,led_polarity: override the active high/low settings of the leds - -Example: - -esw@...10000 { - compatible = "ralink,rt3050-esw"; - reg = <0x10110000 8000>; - - resets = <&rstctrl 23>; - reset-names = "esw"; - - interrupt-parent = <&intc>; - interrupts = <17>; -}; -- 2.34.1
Powered by blists - more mailing lists