[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220919223428.572091-3-anthony.l.nguyen@intel.com>
Date: Mon, 19 Sep 2022 15:34:26 -0700
From: Tony Nguyen <anthony.l.nguyen@...el.com>
To: davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
edumazet@...gle.com
Cc: Michal Jaron <michalx.jaron@...el.com>, netdev@...r.kernel.org,
anthony.l.nguyen@...el.com,
Mateusz Palczewski <mateusz.palczewski@...el.com>,
Konrad Jankowski <konrad0.jankowski@...el.com>
Subject: [PATCH net 2/4] iavf: Fix set max MTU size with port VLAN and jumbo frames
From: Michal Jaron <michalx.jaron@...el.com>
After setting port VLAN and MTU to 9000 on VF with ice driver there
was an iavf error
"PF returned error -5 (IAVF_ERR_PARAM) to our request 6".
During queue configuration, VF's max packet size was set to
IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN
due to making some space for port VLAN as VF is not aware whether it's
in a port VLAN. This mismatch in sizes caused ice to reject queue
configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF
to VF with GET_VF_RESOURCES msg but VF does not look at this.
In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu
received from pf with GET_VF_RESOURCES msg to make vf's
max_frame_size dependent from pf. Add check if received max_mtu is
not in eligible range then set it to IAVF_MAX_RXBUFFER.
Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@...el.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@...el.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@...el.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
---
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
index 15ee85dc33bd..5a9e6563923e 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
@@ -269,11 +269,14 @@ int iavf_get_vf_vlan_v2_caps(struct iavf_adapter *adapter)
void iavf_configure_queues(struct iavf_adapter *adapter)
{
struct virtchnl_vsi_queue_config_info *vqci;
- struct virtchnl_queue_pair_info *vqpi;
+ int i, max_frame = adapter->vf_res->max_mtu;
int pairs = adapter->num_active_queues;
- int i, max_frame = IAVF_MAX_RXBUFFER;
+ struct virtchnl_queue_pair_info *vqpi;
size_t len;
+ if (max_frame > IAVF_MAX_RXBUFFER || !max_frame)
+ max_frame = IAVF_MAX_RXBUFFER;
+
if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
/* bail because we already have a command pending */
dev_err(&adapter->pdev->dev, "Cannot configure queues, command %d pending\n",
--
2.35.1
Powered by blists - more mailing lists