lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 28 Sep 2022 23:00:54 +0200 From: Daniel Lezcano <daniel.lezcano@...aro.org> To: daniel.lezcano@...aro.org, rafael@...nel.org Cc: linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org, rui.zhang@...el.com, Raju Rangoju <rajur@...lsio.com>, "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Peter Kaestle <peter@...e.net>, Hans de Goede <hdegoede@...hat.com>, Mark Gross <markgross@...nel.org>, Miquel Raynal <miquel.raynal@...tlin.com>, Amit Kucheria <amitk@...nel.org>, Nicolas Saenz Julienne <nsaenz@...nel.org>, Broadcom Kernel Team <bcm-kernel-feedback-list@...adcom.com>, Florian Fainelli <f.fainelli@...il.com>, Ray Jui <rjui@...adcom.com>, Scott Branden <sbranden@...adcom.com>, Support Opensource <support.opensource@...semi.com>, Lukasz Luba <lukasz.luba@....com>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>, Fabio Estevam <festevam@...il.com>, NXP Linux Team <linux-imx@....com>, Thara Gopinath <thara.gopinath@...aro.org>, Andy Gross <agross@...nel.org>, Bjorn Andersson <bjorn.andersson@...aro.org>, Niklas Söderlund <niklas.soderlund@...natech.se>, Bartlomiej Zolnierkiewicz <bzolnier@...il.com>, Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, Alim Akhtar <alim.akhtar@...sung.com>, Thierry Reding <thierry.reding@...il.com>, Jonathan Hunter <jonathanh@...dia.com>, Eduardo Valentin <edubezval@...il.com>, Keerthy <j-keerthy@...com>, Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>, Masami Hiramatsu <mhiramat@...nel.org>, Antoine Tenart <atenart@...nel.org>, Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>, Dmitry Osipenko <digetx@...il.com>, netdev@...r.kernel.org, platform-driver-x86@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org, linux-arm-msm@...r.kernel.org, linux-renesas-soc@...r.kernel.org, linux-samsung-soc@...r.kernel.org, linux-tegra@...r.kernel.org, linux-omap@...r.kernel.org, Adam Ward <DLG-Adam.Ward.opensource@...renesas.com> Subject: [PATCH v7 24/29] thermal/drivers/da9062: Use generic thermal_zone_get_trip() function The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org> Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@...renesas.com> --- drivers/thermal/da9062-thermal.c | 52 +++++--------------------------- 1 file changed, 8 insertions(+), 44 deletions(-) diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c index 180edec34e07..1e163e90d6b6 100644 --- a/drivers/thermal/da9062-thermal.c +++ b/drivers/thermal/da9062-thermal.c @@ -120,44 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data) return IRQ_HANDLED; } -static int da9062_thermal_get_trip_type(struct thermal_zone_device *z, - int trip, - enum thermal_trip_type *type) -{ - struct da9062_thermal *thermal = z->devdata; - - switch (trip) { - case 0: - *type = THERMAL_TRIP_HOT; - break; - default: - dev_err(thermal->dev, - "Driver does not support more than 1 trip-wire\n"); - return -EINVAL; - } - - return 0; -} - -static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z, - int trip, - int *temp) -{ - struct da9062_thermal *thermal = z->devdata; - - switch (trip) { - case 0: - *temp = DA9062_MILLI_CELSIUS(125); - break; - default: - dev_err(thermal->dev, - "Driver does not support more than 1 trip-wire\n"); - return -EINVAL; - } - - return 0; -} - static int da9062_thermal_get_temp(struct thermal_zone_device *z, int *temp) { @@ -172,8 +134,10 @@ static int da9062_thermal_get_temp(struct thermal_zone_device *z, static struct thermal_zone_device_ops da9062_thermal_ops = { .get_temp = da9062_thermal_get_temp, - .get_trip_type = da9062_thermal_get_trip_type, - .get_trip_temp = da9062_thermal_get_trip_temp, +}; + +static struct thermal_trip trips[] = { + { .temperature = DA9062_MILLI_CELSIUS(125), .type = THERMAL_TRIP_HOT }, }; static const struct da9062_thermal_config da9062_config = { @@ -228,10 +192,10 @@ static int da9062_thermal_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on); mutex_init(&thermal->lock); - thermal->zone = thermal_zone_device_register(thermal->config->name, - 1, 0, thermal, - &da9062_thermal_ops, NULL, pp_tmp, - 0); + thermal->zone = thermal_zone_device_register_with_trips(thermal->config->name, + trips, ARRAY_SIZE(trips), 0, thermal, + &da9062_thermal_ops, NULL, pp_tmp, + 0); if (IS_ERR(thermal->zone)) { dev_err(&pdev->dev, "Cannot register thermal zone device\n"); ret = PTR_ERR(thermal->zone); -- 2.34.1
Powered by blists - more mailing lists