lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220930142110.15372-4-kabel@kernel.org>
Date:   Fri, 30 Sep 2022 16:21:01 +0200
From:   Marek Behún <kabel@...nel.org>
To:     netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     Russell King <rmk+kernel@...linux.org.uk>,
        Andrew Lunn <andrew@...n.ch>,
        Vladimir Oltean <vladimir.oltean@....com>,
        Marek Behún <kabel@...nel.org>
Subject: [PATCH net-next 03/12] net: phylink: use phy_interface_t bitmaps for optical modules

From: Russell King <rmk+kernel@...linux.org.uk>

Where a MAC provides a phy_interface_t bitmap, use these bitmaps to
select the operating interface mode for optical SFP modules, rather
than using the linkmode bitmaps.

Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
Signed-off-by: Marek Behún <kabel@...nel.org>
---
 drivers/net/phy/phylink.c | 164 +++++++++++++++++++++++++++++++-------
 1 file changed, 134 insertions(+), 30 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index b76bf8df83ff..ab32ef767d69 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2803,6 +2803,70 @@ static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
 	pl->netdev->sfp_bus = NULL;
 }
 
+static const phy_interface_t phylink_sfp_interface_preference[] = {
+	PHY_INTERFACE_MODE_25GBASER,
+	PHY_INTERFACE_MODE_USXGMII,
+	PHY_INTERFACE_MODE_10GBASER,
+	PHY_INTERFACE_MODE_5GBASER,
+	PHY_INTERFACE_MODE_2500BASEX,
+	PHY_INTERFACE_MODE_SGMII,
+	PHY_INTERFACE_MODE_1000BASEX,
+	PHY_INTERFACE_MODE_100BASEX,
+};
+
+static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl,
+						    const unsigned long *intf)
+{
+	phy_interface_t interface;
+	size_t i;
+
+	interface = PHY_INTERFACE_MODE_NA;
+	for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++)
+		if (test_bit(phylink_sfp_interface_preference[i], intf)) {
+			interface = phylink_sfp_interface_preference[i];
+			break;
+		}
+
+	return interface;
+}
+
+static void phylink_sfp_set_config(struct phylink *pl, u8 mode,
+				   unsigned long *supported,
+				   struct phylink_link_state *state)
+{
+	bool changed = false;
+
+	phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
+		    phylink_an_mode_str(mode), phy_modes(state->interface),
+		    __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
+
+	if (!linkmode_equal(pl->supported, supported)) {
+		linkmode_copy(pl->supported, supported);
+		changed = true;
+	}
+
+	if (!linkmode_equal(pl->link_config.advertising, state->advertising)) {
+		linkmode_copy(pl->link_config.advertising, state->advertising);
+		changed = true;
+	}
+
+	if (pl->cur_link_an_mode != mode ||
+	    pl->link_config.interface != state->interface) {
+		pl->cur_link_an_mode = mode;
+		pl->link_config.interface = state->interface;
+
+		changed = true;
+
+		phylink_info(pl, "switched to %s/%s link mode\n",
+			     phylink_an_mode_str(mode),
+			     phy_modes(state->interface));
+	}
+
+	if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
+				 &pl->phylink_disable_state))
+		phylink_mac_initial_config(pl, false);
+}
+
 static int phylink_sfp_config(struct phylink *pl, u8 mode,
 			      const unsigned long *supported,
 			      const unsigned long *advertising)
@@ -2811,7 +2875,6 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
 	struct phylink_link_state config;
 	phy_interface_t iface;
-	bool changed;
 	int ret;
 
 	linkmode_copy(support, supported);
@@ -2854,61 +2917,103 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
 		return ret;
 	}
 
-	phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
-		    phylink_an_mode_str(mode), phy_modes(config.interface),
-		    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
-
 	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
 		return -EINVAL;
 
-	changed = !linkmode_equal(pl->supported, support) ||
-		  !linkmode_equal(pl->link_config.advertising,
-				  config.advertising);
-	if (changed) {
-		linkmode_copy(pl->supported, support);
-		linkmode_copy(pl->link_config.advertising, config.advertising);
+	pl->link_port = pl->sfp_port;
+
+	phylink_sfp_set_config(pl, mode, support, &config);
+
+	return 0;
+}
+
+static int phylink_sfp_config_optical(struct phylink *pl)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
+	struct phylink_link_state config;
+	phy_interface_t interface;
+	int ret;
+
+	phylink_dbg(pl, "optical SFP: interfaces=[mac=%*pbl, sfp=%*pbl]\n",
+		    (int)PHY_INTERFACE_MODE_MAX,
+		    pl->config->supported_interfaces,
+		    (int)PHY_INTERFACE_MODE_MAX,
+		    pl->sfp_interfaces);
+
+	/* Find the union of the supported interfaces by the PCS/MAC and
+	 * the SFP module.
+	 */
+	phy_interface_and(interfaces, pl->config->supported_interfaces,
+			  pl->sfp_interfaces);
+	if (phy_interface_empty(interfaces)) {
+		phylink_err(pl, "unsupported SFP module: no common interface modes\n");
+		return -EINVAL;
 	}
 
-	if (pl->cur_link_an_mode != mode ||
-	    pl->link_config.interface != config.interface) {
-		pl->link_config.interface = config.interface;
-		pl->cur_link_an_mode = mode;
+	memset(&config, 0, sizeof(config));
+	linkmode_copy(support, pl->sfp_support);
+	linkmode_copy(config.advertising, pl->sfp_support);
+	config.speed = SPEED_UNKNOWN;
+	config.duplex = DUPLEX_UNKNOWN;
+	config.pause = MLO_PAUSE_AN;
+	config.an_enabled = true;
 
-		changed = true;
+	/* For all the interfaces that are supported, reduce the sfp_support
+	 * mask to only those link modes that can be supported.
+	 */
+	ret = phylink_validate_mask(pl, pl->sfp_support, &config, interfaces);
+	if (ret) {
+		phylink_err(pl, "unsupported SFP module: validation with support %*pb failed\n",
+			    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
+		return ret;
+	}
 
-		phylink_info(pl, "switched to %s/%s link mode\n",
-			     phylink_an_mode_str(mode),
-			     phy_modes(config.interface));
+	interface = phylink_choose_sfp_interface(pl, interfaces);
+	if (interface == PHY_INTERFACE_MODE_NA) {
+		phylink_err(pl, "failed to select SFP interface\n");
+		return -EINVAL;
+	}
+
+	phylink_dbg(pl, "optical SFP: chosen %s interface\n",
+		    phy_modes(interface));
+
+	config.interface = interface;
+
+	/* Ignore errors if we're expecting a PHY to attach later */
+	ret = phylink_validate(pl, support, &config);
+	if (ret) {
+		phylink_err(pl, "validation with support %*pb failed: %pe\n",
+			    __ETHTOOL_LINK_MODE_MASK_NBITS, support,
+			    ERR_PTR(ret));
+		return ret;
 	}
 
 	pl->link_port = pl->sfp_port;
 
-	if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
-				 &pl->phylink_disable_state))
-		phylink_mac_initial_config(pl, false);
+	phylink_sfp_set_config(pl, MLO_AN_INBAND, pl->sfp_support, &config);
 
-	return ret;
+	return 0;
 }
 
 static int phylink_sfp_module_insert(void *upstream,
 				     const struct sfp_eeprom_id *id)
 {
 	struct phylink *pl = upstream;
-	unsigned long *support = pl->sfp_support;
 
 	ASSERT_RTNL();
 
-	linkmode_zero(support);
+	linkmode_zero(pl->sfp_support);
 	phy_interface_zero(pl->sfp_interfaces);
-	sfp_parse_support(pl->sfp_bus, id, support, pl->sfp_interfaces);
-	pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
+	sfp_parse_support(pl->sfp_bus, id, pl->sfp_support, pl->sfp_interfaces);
+	pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, pl->sfp_support);
 
 	/* If this module may have a PHY connecting later, defer until later */
 	pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
 	if (pl->sfp_may_have_phy)
 		return 0;
 
-	return phylink_sfp_config(pl, MLO_AN_INBAND, support, support);
+	return phylink_sfp_config_optical(pl);
 }
 
 static int phylink_sfp_module_start(void *upstream)
@@ -2927,8 +3032,7 @@ static int phylink_sfp_module_start(void *upstream)
 	if (!pl->sfp_may_have_phy)
 		return 0;
 
-	return phylink_sfp_config(pl, MLO_AN_INBAND,
-				  pl->sfp_support, pl->sfp_support);
+	return phylink_sfp_config_optical(pl);
 }
 
 static void phylink_sfp_module_stop(void *upstream)
-- 
2.35.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ