| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221012103533.738954-2-jiawenwu@trustnetic.com>
Date: Wed, 12 Oct 2022 18:35:31 +0800
From: Jiawen Wu <jiawenwu@...stnetic.com>
To: netdev@...r.kernel.org
Cc: mengyuanlou@...-swift.com, Jiawen Wu <jiawenwu@...stnetic.com>
Subject: [PATCH net-next v4 1/3] net: txgbe: Store PCI info
Get PCI config space info, set LAN id and check flash status.
Signed-off-by: Jiawen Wu <jiawenwu@...stnetic.com>
---
drivers/net/ethernet/wangxun/Kconfig | 6 ++
drivers/net/ethernet/wangxun/Makefile | 1 +
drivers/net/ethernet/wangxun/libwx/Makefile | 7 ++
drivers/net/ethernet/wangxun/libwx/wx_hw.c | 88 +++++++++++++++
drivers/net/ethernet/wangxun/libwx/wx_hw.h | 10 ++
drivers/net/ethernet/wangxun/libwx/wx_type.h | 56 ++++++++++
drivers/net/ethernet/wangxun/txgbe/txgbe.h | 4 +
.../net/ethernet/wangxun/txgbe/txgbe_main.c | 101 +++++++++++++++++-
.../net/ethernet/wangxun/txgbe/txgbe_type.h | 19 ++--
9 files changed, 282 insertions(+), 10 deletions(-)
create mode 100644 drivers/net/ethernet/wangxun/libwx/Makefile
create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_hw.c
create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_hw.h
create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_type.h
diff --git a/drivers/net/ethernet/wangxun/Kconfig b/drivers/net/ethernet/wangxun/Kconfig
index f5d43d8c9629..565fa826b056 100644
--- a/drivers/net/ethernet/wangxun/Kconfig
+++ b/drivers/net/ethernet/wangxun/Kconfig
@@ -16,6 +16,11 @@ config NET_VENDOR_WANGXUN
if NET_VENDOR_WANGXUN
+config LIBWX
+ tristate
+ help
+ Common library for Wangxun(R) Ethernet drivers.
+
config NGBE
tristate "Wangxun(R) GbE PCI Express adapters support"
depends on PCI
@@ -32,6 +37,7 @@ config NGBE
config TXGBE
tristate "Wangxun(R) 10GbE PCI Express adapters support"
depends on PCI
+ select LIBWX
help
This driver supports Wangxun(R) 10GbE PCI Express family of
adapters.
diff --git a/drivers/net/ethernet/wangxun/Makefile b/drivers/net/ethernet/wangxun/Makefile
index ac3fb06b233c..ca19311dbe38 100644
--- a/drivers/net/ethernet/wangxun/Makefile
+++ b/drivers/net/ethernet/wangxun/Makefile
@@ -3,5 +3,6 @@
# Makefile for the Wangxun network device drivers.
#
+obj-$(CONFIG_LIBWX) += libwx/
obj-$(CONFIG_TXGBE) += txgbe/
obj-$(CONFIG_NGBE) += ngbe/
diff --git a/drivers/net/ethernet/wangxun/libwx/Makefile b/drivers/net/ethernet/wangxun/libwx/Makefile
new file mode 100644
index 000000000000..1ed5e23af944
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/libwx/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd.
+#
+
+obj-$(CONFIG_LIBWX) += libwx.o
+
+libwx-objs := wx_hw.o
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
new file mode 100644
index 000000000000..fed51c2f3071
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */
+
+#include <linux/iopoll.h>
+#include <linux/pci.h>
+
+#include "wx_type.h"
+#include "wx_hw.h"
+
+/* cmd_addr is used for some special command:
+ * 1. to be sector address, when implemented erase sector command
+ * 2. to be flash address when implemented read, write flash address
+ */
+static int wx_fmgr_cmd_op(struct wx_hw *wxhw, u32 cmd, u32 cmd_addr)
+{
+ u32 cmd_val = 0, val = 0;
+
+ cmd_val = WX_SPI_CMD_CMD(cmd) |
+ WX_SPI_CMD_CLK(WX_SPI_CLK_DIV) |
+ cmd_addr;
+ wr32(wxhw, WX_SPI_CMD, cmd_val);
+
+ return read_poll_timeout(rd32, val, (val & 0x1), 10, 100000,
+ false, wxhw, WX_SPI_STATUS);
+}
+
+static int wx_flash_read_dword(struct wx_hw *wxhw, u32 addr, u32 *data)
+{
+ int ret = 0;
+
+ ret = wx_fmgr_cmd_op(wxhw, WX_SPI_CMD_READ_DWORD, addr);
+ if (ret < 0)
+ return ret;
+
+ *data = rd32(wxhw, WX_SPI_DATA);
+
+ return ret;
+}
+
+int wx_check_flash_load(struct wx_hw *hw, u32 check_bit)
+{
+ u32 reg = 0;
+ int err = 0;
+
+ /* if there's flash existing */
+ if (!(rd32(hw, WX_SPI_STATUS) &
+ WX_SPI_STATUS_FLASH_BYPASS)) {
+ /* wait hw load flash done */
+ err = read_poll_timeout(rd32, reg, !(reg & check_bit), 20000, 2000000,
+ false, hw, WX_SPI_ILDR_STATUS);
+ if (err < 0)
+ wx_err(hw, "Check flash load timeout.\n");
+ }
+
+ return err;
+}
+EXPORT_SYMBOL(wx_check_flash_load);
+
+int wx_sw_init(struct wx_hw *wxhw)
+{
+ struct pci_dev *pdev = wxhw->pdev;
+ u32 ssid = 0;
+ int err = 0;
+
+ wxhw->vendor_id = pdev->vendor;
+ wxhw->device_id = pdev->device;
+ wxhw->revision_id = pdev->revision;
+ wxhw->oem_svid = pdev->subsystem_vendor;
+ wxhw->oem_ssid = pdev->subsystem_device;
+ wxhw->bus.device = PCI_SLOT(pdev->devfn);
+ wxhw->bus.func = PCI_FUNC(pdev->devfn);
+
+ if (wxhw->oem_svid == PCI_VENDOR_ID_WANGXUN) {
+ wxhw->subsystem_vendor_id = pdev->subsystem_vendor;
+ wxhw->subsystem_device_id = pdev->subsystem_device;
+ } else {
+ err = wx_flash_read_dword(wxhw, 0xfffdc, &ssid);
+ if (!err)
+ wxhw->subsystem_device_id = swab16((u16)ssid);
+
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(wx_sw_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h
new file mode 100644
index 000000000000..42e95283242c
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */
+
+#ifndef _WX_HW_H_
+#define _WX_HW_H_
+
+int wx_check_flash_load(struct wx_hw *hw, u32 check_bit);
+int wx_sw_init(struct wx_hw *wxhw);
+
+#endif /* _WX_HW_H_ */
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h
new file mode 100644
index 000000000000..fa06443ca4f5
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */
+
+#ifndef _WX_TYPE_H_
+#define _WX_TYPE_H_
+
+/* Vendor ID */
+#ifndef PCI_VENDOR_ID_WANGXUN
+#define PCI_VENDOR_ID_WANGXUN 0x8088
+#endif
+
+/* FMGR Registers */
+#define WX_SPI_CMD 0x10104
+#define WX_SPI_CMD_READ_DWORD 0x1
+#define WX_SPI_CLK_DIV 0x3
+#define WX_SPI_CMD_CMD(_v) (((_v) & 0x7) << 28)
+#define WX_SPI_CMD_CLK(_v) (((_v) & 0x7) << 25)
+#define WX_SPI_CMD_ADDR(_v) (((_v) & 0xFFFFFF))
+#define WX_SPI_DATA 0x10108
+#define WX_SPI_DATA_BYPASS BIT(31)
+#define WX_SPI_DATA_STATUS(_v) (((_v) & 0xFF) << 16)
+#define WX_SPI_DATA_OP_DONE BIT(0)
+#define WX_SPI_STATUS 0x1010C
+#define WX_SPI_STATUS_OPDONE BIT(0)
+#define WX_SPI_STATUS_FLASH_BYPASS BIT(31)
+#define WX_SPI_ILDR_STATUS 0x10120
+
+/* Bus parameters */
+struct wx_bus_info {
+ u8 func;
+ u16 device;
+};
+
+struct wx_hw {
+ u8 __iomem *hw_addr;
+ struct pci_dev *pdev;
+ struct wx_bus_info bus;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_device_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ u16 oem_ssid;
+ u16 oem_svid;
+};
+
+/**
+ * register operations
+ **/
+#define wr32(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
+#define rd32(a, reg) readl((a)->hw_addr + (reg))
+
+#define wx_err(wxhw, fmt, arg...) \
+ dev_err(&(wxhw)->pdev->dev, fmt, ##arg)
+
+#endif /* _WX_TYPE_H_ */
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe.h b/drivers/net/ethernet/wangxun/txgbe/txgbe.h
index 38ddbde0ed0f..9a97b85be3ac 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe.h
@@ -17,6 +17,10 @@ struct txgbe_adapter {
/* OS defined structs */
struct net_device *netdev;
struct pci_dev *pdev;
+
+ /* structs defined in txgbe_type.h */
+ struct txgbe_hw hw;
+ u16 msg_enable;
};
extern char txgbe_driver_name[];
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
index d3b9f73ecba4..71ea197fe299 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
@@ -9,6 +9,8 @@
#include <linux/aer.h>
#include <linux/etherdevice.h>
+#include "../libwx/wx_type.h"
+#include "../libwx/wx_hw.h"
#include "txgbe.h"
char txgbe_driver_name[] = "txgbe";
@@ -30,6 +32,69 @@ static const struct pci_device_id txgbe_pci_tbl[] = {
#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+static void txgbe_check_minimum_link(struct txgbe_adapter *adapter)
+{
+ struct pci_dev *pdev;
+
+ pdev = adapter->pdev;
+ pcie_print_link_status(pdev);
+}
+
+/**
+ * txgbe_enumerate_functions - Get the number of ports this device has
+ * @adapter: adapter structure
+ *
+ * This function enumerates the phsyical functions co-located on a single slot,
+ * in order to determine how many ports a device has. This is most useful in
+ * determining the required GT/s of PCIe bandwidth necessary for optimal
+ * performance.
+ **/
+static int txgbe_enumerate_functions(struct txgbe_adapter *adapter)
+{
+ struct pci_dev *entry, *pdev = adapter->pdev;
+ int physfns = 0;
+
+ list_for_each_entry(entry, &pdev->bus->devices, bus_list) {
+ /* When the devices on the bus don't all match our device ID,
+ * we can't reliably determine the correct number of
+ * functions. This can occur if a function has been direct
+ * attached to a virtual machine using VT-d.
+ */
+ if (entry->vendor != pdev->vendor ||
+ entry->device != pdev->device)
+ return -EINVAL;
+
+ physfns++;
+ }
+
+ return physfns;
+}
+
+/**
+ * txgbe_sw_init - Initialize general software structures (struct txgbe_adapter)
+ * @adapter: board private structure to initialize
+ **/
+static int txgbe_sw_init(struct txgbe_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct txgbe_hw *hw = &adapter->hw;
+ struct wx_hw *wxhw = &hw->wxhw;
+ int err;
+
+ wxhw->hw_addr = adapter->io_addr;
+ wxhw->pdev = pdev;
+
+ /* PCI config space info */
+ err = wx_sw_init(wxhw);
+ if (err < 0) {
+ netif_err(adapter, probe, adapter->netdev,
+ "read of internal subsystem device id failed\n");
+ return err;
+ }
+
+ return 0;
+}
+
static void txgbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
struct txgbe_adapter *adapter = pci_get_drvdata(pdev);
@@ -67,8 +132,10 @@ static int txgbe_probe(struct pci_dev *pdev,
const struct pci_device_id __always_unused *ent)
{
struct txgbe_adapter *adapter = NULL;
+ struct txgbe_hw *hw = NULL;
+ struct wx_hw *wxhw = NULL;
struct net_device *netdev;
- int err;
+ int err, expected_gts;
err = pci_enable_device_mem(pdev);
if (err)
@@ -107,6 +174,9 @@ static int txgbe_probe(struct pci_dev *pdev,
adapter = netdev_priv(netdev);
adapter->netdev = netdev;
adapter->pdev = pdev;
+ hw = &adapter->hw;
+ wxhw = &hw->wxhw;
+ adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
adapter->io_addr = devm_ioremap(&pdev->dev,
pci_resource_start(pdev, 0),
@@ -116,10 +186,39 @@ static int txgbe_probe(struct pci_dev *pdev,
goto err_pci_release_regions;
}
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ /* setup the private structure */
+ err = txgbe_sw_init(adapter);
+ if (err)
+ goto err_pci_release_regions;
+
+ /* check if flash load is done after hw power up */
+ err = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_PERST);
+ if (err)
+ goto err_pci_release_regions;
+ err = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_PWRRST);
+ if (err)
+ goto err_pci_release_regions;
+
netdev->features |= NETIF_F_HIGHDMA;
pci_set_drvdata(pdev, adapter);
+ /* calculate the expected PCIe bandwidth required for optimal
+ * performance. Note that some older parts will never have enough
+ * bandwidth due to being older generation PCIe parts. We clamp these
+ * parts to ensure that no warning is displayed, as this could confuse
+ * users otherwise.
+ */
+ expected_gts = txgbe_enumerate_functions(adapter) * 10;
+
+ /* don't check link if we failed to enumerate functions */
+ if (expected_gts > 0)
+ txgbe_check_minimum_link(adapter);
+ else
+ dev_warn(&pdev->dev, "Failed to enumerate PF devices.\n");
+
return 0;
err_pci_release_regions:
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
index b2e329f50bae..1d1ead3d3c06 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
@@ -4,15 +4,6 @@
#ifndef _TXGBE_TYPE_H_
#define _TXGBE_TYPE_H_
-#include <linux/types.h>
-#include <linux/netdevice.h>
-
-/************ txgbe_register.h ************/
-/* Vendor ID */
-#ifndef PCI_VENDOR_ID_WANGXUN
-#define PCI_VENDOR_ID_WANGXUN 0x8088
-#endif
-
/* Device IDs */
#define TXGBE_DEV_ID_SP1000 0x1001
#define TXGBE_DEV_ID_WX1820 0x2001
@@ -54,4 +45,14 @@
/* Revision ID */
#define TXGBE_SP_MPW 1
+/**************** SP Registers ****************************/
+/* FMGR Registers */
+#define TXGBE_SPI_ILDR_STATUS 0x10120
+#define TXGBE_SPI_ILDR_STATUS_PERST BIT(0) /* PCIE_PERST is done */
+#define TXGBE_SPI_ILDR_STATUS_PWRRST BIT(1) /* Power on reset is done */
+
+struct txgbe_hw {
+ struct wx_hw wxhw;
+};
+
#endif /* _TXGBE_TYPE_H_ */
--
2.27.0
Powered by blists - more mailing lists