[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221019182021.2334783-1-Raju.Rangoju@amd.com>
Date: Wed, 19 Oct 2022 23:50:16 +0530
From: Raju Rangoju <Raju.Rangoju@....com>
To: <davem@...emloft.net>, <kuba@...nel.org>,
<thomas.lendacky@....com>, <Shyam-sundar.S-k@....com>
CC: <netdev@...r.kernel.org>, <rajesh1.kumar@....com>,
Raju Rangoju <Raju.Rangoju@....com>
Subject: [PATCH v2 net 0/5] amd-xgbe: Miscellaneous fixes
(1) Fix the rrc for Yellow carp devices. CDR workaround path
is disabled for YC devices, receiver reset cycle is not
needed in such cases.
(2) Add enumerations for mailbox command and sub-commands.
Instead of using hard-coded values, use enums.
(3) Enable PLL_CTL for fixed PHY modes only. Driver does not
implement SW RRCM for Autoneg Off configuration, hence PLL
is needed for fixed PHY modes only.
(4) Fix the SFP compliance codes check for DAC cables. Some of
the passive cables have non-zero data at offset 6 in
SFP EEPROM data. So, fix the sfp compliance codes check.
(5) Add a quirk for Molex passive cables to extend the rate
ceiling to 0x78.
Raju Rangoju (5):
amd-xgbe: Yellow carp devices do not need rrc
amd-xgbe: use enums for mailbox cmd and sub_cmds
amd-xgbe: enable PLL_CTL for fixed PHY modes only
amd-xgbe: fix the SFP compliance codes check for DAC cables
amd-xgbe: add the bit rate quirk for Molex cables
drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 5 ++
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 58 +++++++++++++--------
drivers/net/ethernet/amd/xgbe/xgbe.h | 26 +++++++++
3 files changed, 68 insertions(+), 21 deletions(-)
--
2.25.1
Powered by blists - more mailing lists