| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221020064215.2341278-3-Raju.Rangoju@amd.com>
Date: Thu, 20 Oct 2022 12:12:12 +0530
From: Raju Rangoju <Raju.Rangoju@....com>
To: <thomas.lendacky@....com>, <Shyam-sundar.S-k@....com>,
<davem@...emloft.net>, <kuba@...nel.org>
CC: <netdev@...r.kernel.org>, <Rajesh1.Kumar@....com>,
Raju Rangoju <Raju.Rangoju@....com>
Subject: [PATCH v3 net 2/5] amd-xgbe: use enums for mailbox cmd and sub_cmds
Instead of using hardcoded values, use enumerations for mailbox command
and sub commands.
Signed-off-by: Raju Rangoju <Raju.Rangoju@....com>
---
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 29 ++++++++++++---------
drivers/net/ethernet/amd/xgbe/xgbe.h | 25 ++++++++++++++++++
2 files changed, 41 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 19b943eba560..8cf5d81fca36 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1989,7 +1989,7 @@ static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable)
}
static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
- unsigned int cmd, unsigned int sub_cmd)
+ enum xgbe_mb_cmd cmd, enum xgbe_mb_subcmd sub_cmd)
{
unsigned int s0 = 0;
unsigned int wait;
@@ -2036,7 +2036,7 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)
{
/* Receiver Reset Cycle */
- xgbe_phy_perform_ratechange(pdata, 5, 0);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_RRC, XGBE_MB_SUBCMD_NONE);
netif_dbg(pdata, link, pdata->netdev, "receiver reset complete\n");
}
@@ -2046,7 +2046,7 @@ static void xgbe_phy_power_off(struct xgbe_prv_data *pdata)
struct xgbe_phy_data *phy_data = pdata->phy_data;
/* Power off */
- xgbe_phy_perform_ratechange(pdata, 0, 0);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_POWER_OFF, XGBE_MB_SUBCMD_NONE);
phy_data->cur_mode = XGBE_MODE_UNKNOWN;
@@ -2061,14 +2061,17 @@ static void xgbe_phy_sfi_mode(struct xgbe_prv_data *pdata)
/* 10G/SFI */
if (phy_data->sfp_cable != XGBE_SFP_CABLE_PASSIVE) {
- xgbe_phy_perform_ratechange(pdata, 3, 0);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_SFI, XGBE_MB_SUBCMD_ACTIVE);
} else {
if (phy_data->sfp_cable_len <= 1)
- xgbe_phy_perform_ratechange(pdata, 3, 1);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_SFI,
+ XGBE_MB_SUBCMD_PASSIVE_1M);
else if (phy_data->sfp_cable_len <= 3)
- xgbe_phy_perform_ratechange(pdata, 3, 2);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_SFI,
+ XGBE_MB_SUBCMD_PASSIVE_3M);
else
- xgbe_phy_perform_ratechange(pdata, 3, 3);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_SFI,
+ XGBE_MB_SUBCMD_PASSIVE_OTHER);
}
phy_data->cur_mode = XGBE_MODE_SFI;
@@ -2083,7 +2086,7 @@ static void xgbe_phy_x_mode(struct xgbe_prv_data *pdata)
xgbe_phy_set_redrv_mode(pdata);
/* 1G/X */
- xgbe_phy_perform_ratechange(pdata, 1, 3);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_1G, XGBE_MB_SUBCMD_1G_KX);
phy_data->cur_mode = XGBE_MODE_X;
@@ -2097,7 +2100,7 @@ static void xgbe_phy_sgmii_1000_mode(struct xgbe_prv_data *pdata)
xgbe_phy_set_redrv_mode(pdata);
/* 1G/SGMII */
- xgbe_phy_perform_ratechange(pdata, 1, 2);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_1G, XGBE_MB_SUBCMD_1G_SGMII);
phy_data->cur_mode = XGBE_MODE_SGMII_1000;
@@ -2111,7 +2114,7 @@ static void xgbe_phy_sgmii_100_mode(struct xgbe_prv_data *pdata)
xgbe_phy_set_redrv_mode(pdata);
/* 100M/SGMII */
- xgbe_phy_perform_ratechange(pdata, 1, 1);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_1G, XGBE_MB_SUBCMD_100MBITS);
phy_data->cur_mode = XGBE_MODE_SGMII_100;
@@ -2125,7 +2128,7 @@ static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
xgbe_phy_set_redrv_mode(pdata);
/* 10G/KR */
- xgbe_phy_perform_ratechange(pdata, 4, 0);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_10G_KR, XGBE_MB_SUBCMD_NONE);
phy_data->cur_mode = XGBE_MODE_KR;
@@ -2139,7 +2142,7 @@ static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
xgbe_phy_set_redrv_mode(pdata);
/* 2.5G/KX */
- xgbe_phy_perform_ratechange(pdata, 2, 0);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_2_5G, XGBE_MB_SUBCMD_NONE);
phy_data->cur_mode = XGBE_MODE_KX_2500;
@@ -2153,7 +2156,7 @@ static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata)
xgbe_phy_set_redrv_mode(pdata);
/* 1G/KX */
- xgbe_phy_perform_ratechange(pdata, 1, 3);
+ xgbe_phy_perform_ratechange(pdata, XGBE_MB_CMD_SET_1G, XGBE_MB_SUBCMD_1G_KX);
phy_data->cur_mode = XGBE_MODE_KX_1000;
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
index 49d23abce73d..71f24cb47935 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -611,6 +611,31 @@ enum xgbe_mdio_mode {
XGBE_MDIO_MODE_CL45,
};
+enum xgbe_mb_cmd {
+ XGBE_MB_CMD_POWER_OFF = 0,
+ XGBE_MB_CMD_SET_1G,
+ XGBE_MB_CMD_SET_2_5G,
+ XGBE_MB_CMD_SET_10G_SFI,
+ XGBE_MB_CMD_SET_10G_KR,
+ XGBE_MB_CMD_RRC
+};
+
+enum xgbe_mb_subcmd {
+ XGBE_MB_SUBCMD_NONE = 0,
+
+ /* 10GbE SFP subcommands */
+ XGBE_MB_SUBCMD_ACTIVE = 0,
+ XGBE_MB_SUBCMD_PASSIVE_1M,
+ XGBE_MB_SUBCMD_PASSIVE_3M,
+ XGBE_MB_SUBCMD_PASSIVE_OTHER,
+
+ /* 1GbE Mode subcommands */
+ XGBE_MB_SUBCMD_10MBITS = 0,
+ XGBE_MB_SUBCMD_100MBITS,
+ XGBE_MB_SUBCMD_1G_SGMII,
+ XGBE_MB_SUBCMD_1G_KX
+};
+
struct xgbe_phy {
struct ethtool_link_ksettings lks;
--
2.25.1
Powered by blists - more mailing lists