netdev - [V2 net 01/16] net/mlx5e: Do not increment ESN when updating IPsec ESN state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221024061220.81662-2-saeed@kernel.org>
Date:   Mon, 24 Oct 2022 07:12:05 +0100
From:   Saeed Mahameed <saeed@...nel.org>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Eric Dumazet <edumazet@...gle.com>
Cc:     Saeed Mahameed <saeedm@...dia.com>, netdev@...r.kernel.org,
        Tariq Toukan <tariqt@...dia.com>,
        Hyong Youb Kim <hyonkim@...co.com>,
        Leon Romanovsky <leonro@...dia.com>
Subject: [V2 net 01/16] net/mlx5e: Do not increment ESN when updating IPsec ESN state

From: Hyong Youb Kim <hyonkim@...co.com>

An offloaded SA stops receiving after about 2^32 + replay_window
packets. For example, when SA reaches <seq-hi 0x1, seq 0x2c>, all
subsequent packets get dropped with SA-icv-failure (integrity_failed).

To reproduce the bug:
- ConnectX-6 Dx with crypto enabled (FW 22.30.1004)
- ipsec.conf:
  nic-offload = yes
  replay-window = 32
  esn = yes
  salifetime=24h
- Run netperf for a long time to send more than 2^32 packets
  netperf -H <device-under-test> -t TCP_STREAM -l 20000

When 2^32 + replay_window packets are received, the replay window
moves from the 2nd half of subspace (overlap=1) to the 1st half
(overlap=0). The driver then updates the 'esn' value in NIC
(i.e. seq_hi) as follows.

 seq_hi = xfrm_replay_seqhi(seq_bottom)
 new esn in NIC = seq_hi + 1

The +1 increment is wrong, as seq_hi already contains the correct
seq_hi. For example, when seq_hi=1, the driver actually tells NIC to
use seq_hi=2 (esn). This incorrect esn value causes all subsequent
packets to fail integrity checks (SA-icv-failure). So, do not
increment.

Fixes: cb01008390bb ("net/mlx5: IPSec, Add support for ESN")
Signed-off-by: Hyong Youb Kim <hyonkim@...co.com>
Acked-by: Leon Romanovsky <leonro@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
index 2a8fd7020622..a715601865d3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
@@ -101,7 +101,6 @@ static bool mlx5e_ipsec_update_esn_state(struct mlx5e_ipsec_sa_entry *sa_entry)
 	struct xfrm_replay_state_esn *replay_esn;
 	u32 seq_bottom = 0;
 	u8 overlap;
-	u32 *esn;
 
 	if (!(sa_entry->x->props.flags & XFRM_STATE_ESN)) {
 		sa_entry->esn_state.trigger = 0;
@@ -116,11 +115,9 @@ static bool mlx5e_ipsec_update_esn_state(struct mlx5e_ipsec_sa_entry *sa_entry)
 
 	sa_entry->esn_state.esn = xfrm_replay_seqhi(sa_entry->x,
 						    htonl(seq_bottom));
-	esn = &sa_entry->esn_state.esn;
 
 	sa_entry->esn_state.trigger = 1;
 	if (unlikely(overlap && seq_bottom < MLX5E_IPSEC_ESN_SCOPE_MID)) {
-		++(*esn);
 		sa_entry->esn_state.overlap = 0;
 		return true;
 	} else if (unlikely(!overlap &&
-- 
2.37.3