lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221027190005.400839-1-sean.anderson@seco.com> Date: Thu, 27 Oct 2022 15:00:05 -0400 From: Sean Anderson <sean.anderson@...o.com> To: "David S . Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org (open list:DPAA2 ETHERNET DRIVER) Cc: linux-kernel@...r.kernel.org (open list), Ioana Ciornei <ioana.ciornei@....com>, Sean Anderson <sean.anderson@...o.com> Subject: [PATCH] net: dpaa2: Add some debug prints on deferred probe When this device is deferred, there is often no way to determine what the cause was. Add some debug prints to make it easier to figure out what is blocking the probe. Signed-off-by: Sean Anderson <sean.anderson@...o.com> --- .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 33 +++++++++++++------ .../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 ++- 2 files changed, 27 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 281d7e3905c1..892a1403c469 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -3038,10 +3038,12 @@ static struct fsl_mc_device *dpaa2_eth_setup_dpcon(struct dpaa2_eth_priv *priv) err = fsl_mc_object_allocate(to_fsl_mc_device(dev), FSL_MC_POOL_DPCON, &dpcon); if (err) { - if (err == -ENXIO) + if (err == -ENXIO) { + dev_dbg(dev, "Waiting for DPCON\n"); err = -EPROBE_DEFER; - else + } else { dev_info(dev, "Not enough DPCONs, will go on as-is\n"); + } return ERR_PTR(err); } @@ -3151,7 +3153,9 @@ static int dpaa2_eth_setup_dpio(struct dpaa2_eth_priv *priv) channel = dpaa2_eth_alloc_channel(priv); if (IS_ERR_OR_NULL(channel)) { err = PTR_ERR_OR_ZERO(channel); - if (err != -EPROBE_DEFER) + if (err == -EPROBE_DEFER) + dev_dbg(dev, "waiting for affine channel\n"); + else dev_info(dev, "No affine channel for cpu %d and above\n", i); goto err_alloc_ch; @@ -4605,8 +4609,10 @@ static int dpaa2_eth_connect_mac(struct dpaa2_eth_priv *priv) dpni_dev = to_fsl_mc_device(priv->net_dev->dev.parent); dpmac_dev = fsl_mc_get_endpoint(dpni_dev, 0); - if (PTR_ERR(dpmac_dev) == -EPROBE_DEFER) + if (PTR_ERR(dpmac_dev) == -EPROBE_DEFER) { + netdev_dbg(priv->net_dev, "waiting for mac\n"); return PTR_ERR(dpmac_dev); + } if (IS_ERR(dpmac_dev) || dpmac_dev->dev.type != &fsl_mc_bus_dpmac_type) return 0; @@ -4626,11 +4632,16 @@ static int dpaa2_eth_connect_mac(struct dpaa2_eth_priv *priv) if (dpaa2_eth_is_type_phy(priv)) { err = dpaa2_mac_connect(mac); - if (err && err != -EPROBE_DEFER) - netdev_err(priv->net_dev, "Error connecting to the MAC endpoint: %pe", - ERR_PTR(err)); - if (err) + if (err) { + if (err == -EPROBE_DEFER) + netdev_dbg(priv->net_dev, + "could not connect to MAC\n"); + else + netdev_err(priv->net_dev, + "Error connecting to the MAC endpoint: %pe", + ERR_PTR(err)); goto err_close_mac; + } } return 0; @@ -4802,10 +4813,12 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) err = fsl_mc_portal_allocate(dpni_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL, &priv->mc_io); if (err) { - if (err == -ENXIO) + if (err == -ENXIO) { + dev_dbg(dev, "waiting for MC portal\n"); err = -EPROBE_DEFER; - else + } else { dev_err(dev, "MC portal allocation failed\n"); + } goto err_portal_alloc; } diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c index 49ff85633783..2bbab28f763d 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c @@ -105,6 +105,7 @@ static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev, * thus the fwnode field is not yet set. Defer probe if we are * facing this situation. */ + dev_dbg(dev, "dprc not finished probing\n"); return ERR_PTR(-EPROBE_DEFER); } @@ -264,8 +265,10 @@ static int dpaa2_pcs_create(struct dpaa2_mac *mac, mdiodev = fwnode_mdio_find_device(node); fwnode_handle_put(node); - if (!mdiodev) + if (!mdiodev) { + netdev_dbg(mac->net_dev, "missing PCS device\n"); return -EPROBE_DEFER; + } mac->pcs = lynx_pcs_create(mdiodev); if (!mac->pcs) { -- 2.35.1.1320.gc452695387.dirty
Powered by blists - more mailing lists