[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y1oDsKfRKHC1Mok9@euler>
Date: Wed, 26 Oct 2022 21:06:08 -0700
From: Colin Foster <colin.foster@...advantage.com>
To: Rob Herring <robh@...nel.org>
Cc: linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Claudiu Manoil <claudiu.manoil@....com>,
John Crispin <john@...ozen.org>,
Sean Wang <sean.wang@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Landen Chao <Landen.Chao@...iatek.com>,
nç ÜNAL <arinc.unal@...nc9.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Paolo Abeni <pabeni@...hat.com>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>,
Vladimir Oltean <olteanv@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Lee Jones <lee@...nel.org>
Subject: Re: [PATCH v1 net-next 6/7] dt-bindings: net: add generic
ethernet-switch-port binding
On Wed, Oct 26, 2022 at 12:44:21PM -0500, Rob Herring wrote:
> On Mon, Oct 24, 2022 at 10:03:54PM -0700, Colin Foster wrote:
> > The dsa-port.yaml binding had several references that can be common to all
> > ethernet ports, not just dsa-specific ones. Break out the generic bindings
> > to ethernet-switch-port.yaml they can be used by non-dsa drivers.
> >
> > Signed-off-by: Colin Foster <colin.foster@...advantage.com>
> > Suggested-by: Vladimir Oltean <olteanv@...il.com>
> > ---
> > .../devicetree/bindings/net/dsa/dsa-port.yaml | 26 +----------
> > .../bindings/net/ethernet-switch-port.yaml | 44 +++++++++++++++++++
> > .../bindings/net/ethernet-switch.yaml | 4 +-
> > MAINTAINERS | 1 +
> > 4 files changed, 50 insertions(+), 25 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > index 10ad7e71097b..c5144e733511 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > @@ -4,7 +4,7 @@
> > $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
> > $schema: http://devicetree.org/meta-schemas/core.yaml#
> >
> > -title: Ethernet Switch port Device Tree Bindings
> > +title: DSA Switch port Device Tree Bindings
> >
> > maintainers:
> > - Andrew Lunn <andrew@...n.ch>
> > @@ -15,12 +15,9 @@ description:
> > Ethernet switch port Description
> >
> > allOf:
> > - - $ref: /schemas/net/ethernet-controller.yaml#
> > + - $ref: /schemas/net/ethernet-switch-port.yaml#
> >
> > properties:
> > - reg:
> > - description: Port number
> > -
> > label:
> > description:
> > Describes the label associated with this port, which will become
> > @@ -57,25 +54,6 @@ properties:
> > - rtl8_4t
> > - seville
> >
> > - phy-handle: true
> > -
> > - phy-mode: true
> > -
> > - fixed-link: true
> > -
> > - mac-address: true
> > -
> > - sfp: true
> > -
> > - managed: true
> > -
> > - rx-internal-delay-ps: true
> > -
> > - tx-internal-delay-ps: true
> > -
> > -required:
> > - - reg
> > -
> > # CPU and DSA ports must have phylink-compatible link descriptions
> > if:
> > oneOf:
> > diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> > new file mode 100644
> > index 000000000000..cb1e5e12bf0a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
> > @@ -0,0 +1,44 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Ethernet Switch port Device Tree Bindings
> > +
> > +maintainers:
> > + - Andrew Lunn <andrew@...n.ch>
> > + - Florian Fainelli <f.fainelli@...il.com>
> > + - Vivien Didelot <vivien.didelot@...il.com>
> > +
> > +description:
> > + Ethernet switch port Description
> > +
> > +$ref: ethernet-controller.yaml#
> > +
> > +properties:
> > + reg:
> > + description: Port number
> > +
> > + phy-handle: true
> > +
> > + phy-mode: true
> > +
> > + fixed-link: true
> > +
> > + mac-address: true
> > +
> > + sfp: true
> > +
> > + managed: true
> > +
> > + rx-internal-delay-ps: true
> > +
> > + tx-internal-delay-ps: true
> > +
> > +required:
> > + - reg
> > +
> > +additionalProperties: true
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> > index fbaac536673d..f698857619da 100644
> > --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> > +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
> > @@ -36,7 +36,9 @@ patternProperties:
> > type: object
> > description: Ethernet switch ports
> >
> > - $ref: /schemas/net/dsa/dsa-port.yaml#
> > + allOf:
> > + - $ref: /schemas/net/dsa/dsa-port.yaml#
> > + - $ref: ethernet-switch-port.yaml#
>
> dsa-port.yaml references ethernet-switch-port.yaml, so you shouldn't
> need both here.
>
> I imagine what you were trying to do here was say it is either one of
> these, not both. I don't think this is going work for the same reasons I
> mentioned with unevaluatedProperties.
Oh, that was definitely a mistake for me to reference
ethernet-switch-port.yaml. And that was exactly requested of me when
Vladimir helped guide me down this path:
"""
6. The ethernet-switch.yaml will have "$ref: ethernet-switch-port.yaml#"
and "$ref: dsa-port.yaml". The dsa-port.yaml schema will *not* have
"$ref: ethernet-switch-port.yaml#", just its custom additions.
I'm not 100% on this, but I think there will be a problem if:
- dsa.yaml references ethernet-switch.yaml
- ethernet-switch.yaml references ethernet-switch-port.yaml
- dsa.yaml also references dsa-port.yaml
- dsa-port.yaml references ethernet-switch-port.yaml
because ethernet-switch-port.yaml will be referenced twice. Again,
not sure if this is a problem. If it isn't, things can be simpler,
just make dsa-port.yaml reference ethernet-switch-port.yaml, and skip
steps 2 and 3 since dsa-port.yaml containing just the DSA specifics
is no longer problematic.
"""
I might have been testing to see if this was necessary and since I
didn't notice any dt_binding_check errors this might have slipped into
the patch set. But my intent was to reference both here and remove the
reference in dsa-port.yaml.
>
> Rob
Powered by blists - more mailing lists