| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221027061116.683903-3-jiawenwu@trustnetic.com>
Date: Thu, 27 Oct 2022 14:11:15 +0800
From: Jiawen Wu <jiawenwu@...stnetic.com>
To: netdev@...r.kernel.org
Cc: mengyuanlou@...-swift.com, Jiawen Wu <jiawenwu@...stnetic.com>
Subject: [PATCH net-next v6 2/3] net: txgbe: Reset hardware
Reset and initialize the hardware by configuring the MAC layer.
Signed-off-by: Jiawen Wu <jiawenwu@...stnetic.com>
---
drivers/net/ethernet/wangxun/libwx/wx_hw.c | 160 ++++++++++++++++++
drivers/net/ethernet/wangxun/libwx/wx_hw.h | 2 +
drivers/net/ethernet/wangxun/libwx/wx_type.h | 146 ++++++++++++++++
drivers/net/ethernet/wangxun/txgbe/Makefile | 3 +-
drivers/net/ethernet/wangxun/txgbe/txgbe.h | 5 +-
drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c | 86 ++++++++++
drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h | 9 +
.../net/ethernet/wangxun/txgbe/txgbe_main.c | 21 +++
.../net/ethernet/wangxun/txgbe/txgbe_type.h | 11 +-
9 files changed, 434 insertions(+), 9 deletions(-)
create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
index fed51c2f3071..6e2a2d251a09 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c
+++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
@@ -7,6 +7,21 @@
#include "wx_type.h"
#include "wx_hw.h"
+static void wx_intr_disable(struct wx_hw *wxhw, u64 qmask)
+{
+ u32 mask;
+
+ mask = (qmask & 0xFFFFFFFF);
+ if (mask)
+ wr32(wxhw, WX_PX_IMS(0), mask);
+
+ if (wxhw->mac.type == wx_mac_sp) {
+ mask = (qmask >> 32);
+ if (mask)
+ wr32(wxhw, WX_PX_IMS(1), mask);
+ }
+}
+
/* cmd_addr is used for some special command:
* 1. to be sector address, when implemented erase sector command
* 2. to be flash address when implemented read, write flash address
@@ -56,6 +71,151 @@ int wx_check_flash_load(struct wx_hw *hw, u32 check_bit)
}
EXPORT_SYMBOL(wx_check_flash_load);
+static void wx_disable_rx(struct wx_hw *wxhw)
+{
+ u32 pfdtxgswc;
+ u32 rxctrl;
+
+ rxctrl = rd32(wxhw, WX_RDB_PB_CTL);
+ if (rxctrl & WX_RDB_PB_CTL_RXEN) {
+ pfdtxgswc = rd32(wxhw, WX_PSR_CTL);
+ if (pfdtxgswc & WX_PSR_CTL_SW_EN) {
+ pfdtxgswc &= ~WX_PSR_CTL_SW_EN;
+ wr32(wxhw, WX_PSR_CTL, pfdtxgswc);
+ wxhw->mac.set_lben = true;
+ } else {
+ wxhw->mac.set_lben = false;
+ }
+ rxctrl &= ~WX_RDB_PB_CTL_RXEN;
+ wr32(wxhw, WX_RDB_PB_CTL, rxctrl);
+
+ if (!(((wxhw->subsystem_device_id & WX_NCSI_MASK) == WX_NCSI_SUP) ||
+ ((wxhw->subsystem_device_id & WX_WOL_MASK) == WX_WOL_SUP))) {
+ /* disable mac receiver */
+ wr32m(wxhw, WX_MAC_RX_CFG,
+ WX_MAC_RX_CFG_RE, 0);
+ }
+ }
+}
+
+/**
+ * wx_disable_pcie_master - Disable PCI-express master access
+ * @wxhw: pointer to hardware structure
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests.
+ **/
+static int wx_disable_pcie_master(struct wx_hw *wxhw)
+{
+ int status = 0;
+ u32 val;
+
+ /* Always set this bit to ensure any future transactions are blocked */
+ pci_clear_master(wxhw->pdev);
+
+ /* Exit if master requests are blocked */
+ if (!(rd32(wxhw, WX_PX_TRANSACTION_PENDING)))
+ return 0;
+
+ /* Poll for master request bit to clear */
+ status = read_poll_timeout(rd32, val, !val, 100, WX_PCI_MASTER_DISABLE_TIMEOUT,
+ false, wxhw, WX_PX_TRANSACTION_PENDING);
+ if (status < 0)
+ wx_err(wxhw, "PCIe transaction pending bit did not clear.\n");
+
+ return status;
+}
+
+/**
+ * wx_stop_adapter - Generic stop Tx/Rx units
+ * @wxhw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within wx_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+int wx_stop_adapter(struct wx_hw *wxhw)
+{
+ u16 i;
+
+ /* Set the adapter_stopped flag so other driver functions stop touching
+ * the hardware
+ */
+ wxhw->adapter_stopped = true;
+
+ /* Disable the receive unit */
+ wx_disable_rx(wxhw);
+
+ /* Set interrupt mask to stop interrupts from being generated */
+ wx_intr_disable(wxhw, WX_INTR_ALL);
+
+ /* Clear any pending interrupts, flush previous writes */
+ wr32(wxhw, WX_PX_MISC_IC, 0xffffffff);
+ wr32(wxhw, WX_BME_CTL, 0x3);
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ for (i = 0; i < wxhw->mac.max_tx_queues; i++) {
+ wr32m(wxhw, WX_PX_TR_CFG(i),
+ WX_PX_TR_CFG_SWFLSH | WX_PX_TR_CFG_ENABLE,
+ WX_PX_TR_CFG_SWFLSH);
+ }
+
+ /* Disable the receive unit by stopping each queue */
+ for (i = 0; i < wxhw->mac.max_rx_queues; i++) {
+ wr32m(wxhw, WX_PX_RR_CFG(i),
+ WX_PX_RR_CFG_RR_EN, 0);
+ }
+
+ /* flush all queues disables */
+ WX_WRITE_FLUSH(wxhw);
+
+ /* Prevent the PCI-E bus from hanging by disabling PCI-E master
+ * access and verify no pending requests
+ */
+ return wx_disable_pcie_master(wxhw);
+}
+EXPORT_SYMBOL(wx_stop_adapter);
+
+void wx_reset_misc(struct wx_hw *wxhw)
+{
+ int i;
+
+ /* receive packets that size > 2048 */
+ wr32m(wxhw, WX_MAC_RX_CFG, WX_MAC_RX_CFG_JE, WX_MAC_RX_CFG_JE);
+
+ /* clear counters on read */
+ wr32m(wxhw, WX_MMC_CONTROL,
+ WX_MMC_CONTROL_RSTONRD, WX_MMC_CONTROL_RSTONRD);
+
+ wr32m(wxhw, WX_MAC_RX_FLOW_CTRL,
+ WX_MAC_RX_FLOW_CTRL_RFE, WX_MAC_RX_FLOW_CTRL_RFE);
+
+ wr32(wxhw, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR);
+
+ wr32m(wxhw, WX_MIS_RST_ST,
+ WX_MIS_RST_ST_RST_INIT, 0x1E00);
+
+ /* errata 4: initialize mng flex tbl and wakeup flex tbl*/
+ wr32(wxhw, WX_PSR_MNG_FLEX_SEL, 0);
+ for (i = 0; i < 16; i++) {
+ wr32(wxhw, WX_PSR_MNG_FLEX_DW_L(i), 0);
+ wr32(wxhw, WX_PSR_MNG_FLEX_DW_H(i), 0);
+ wr32(wxhw, WX_PSR_MNG_FLEX_MSK(i), 0);
+ }
+ wr32(wxhw, WX_PSR_LAN_FLEX_SEL, 0);
+ for (i = 0; i < 16; i++) {
+ wr32(wxhw, WX_PSR_LAN_FLEX_DW_L(i), 0);
+ wr32(wxhw, WX_PSR_LAN_FLEX_DW_H(i), 0);
+ wr32(wxhw, WX_PSR_LAN_FLEX_MSK(i), 0);
+ }
+
+ /* set pause frame dst mac addr */
+ wr32(wxhw, WX_RDB_PFCMACDAL, 0xC2000001);
+ wr32(wxhw, WX_RDB_PFCMACDAH, 0x0180);
+}
+EXPORT_SYMBOL(wx_reset_misc);
+
int wx_sw_init(struct wx_hw *wxhw)
{
struct pci_dev *pdev = wxhw->pdev;
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h
index 42e95283242c..2c4c4cbbfb46 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_hw.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h
@@ -5,6 +5,8 @@
#define _WX_HW_H_
int wx_check_flash_load(struct wx_hw *hw, u32 check_bit);
+int wx_stop_adapter(struct wx_hw *wxhw);
+void wx_reset_misc(struct wx_hw *wxhw);
int wx_sw_init(struct wx_hw *wxhw);
#endif /* _WX_HW_H_ */
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h
index 1b2d8ad38dba..1d8e8a529d7a 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_type.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h
@@ -9,6 +9,20 @@
#define PCI_VENDOR_ID_WANGXUN 0x8088
#endif
+#define WX_NCSI_SUP 0x8000
+#define WX_NCSI_MASK 0x8000
+#define WX_WOL_SUP 0x4000
+#define WX_WOL_MASK 0x4000
+
+/**************** Global Registers ****************************/
+/* chip control Registers */
+#define WX_MIS_PWR 0x10000
+#define WX_MIS_RST 0x1000C
+#define WX_MIS_RST_LAN_RST(_i) BIT((_i) + 1)
+#define WX_MIS_RST_ST 0x10030
+#define WX_MIS_RST_ST_RST_INI_SHIFT 8
+#define WX_MIS_RST_ST_RST_INIT (0xFF << WX_MIS_RST_ST_RST_INI_SHIFT)
+
/* FMGR Registers */
#define WX_SPI_CMD 0x10104
#define WX_SPI_CMD_READ_DWORD 0x1
@@ -25,16 +39,120 @@
#define WX_SPI_STATUS_FLASH_BYPASS BIT(31)
#define WX_SPI_ILDR_STATUS 0x10120
+/* Sensors for PVT(Process Voltage Temperature) */
+#define WX_TS_EN 0x10304
+#define WX_TS_EN_ENA BIT(0)
+#define WX_TS_ALARM_THRE 0x1030C
+#define WX_TS_DALARM_THRE 0x10310
+#define WX_TS_INT_EN 0x10314
+#define WX_TS_INT_EN_DALARM_INT_EN BIT(1)
+#define WX_TS_INT_EN_ALARM_INT_EN BIT(0)
+#define WX_TS_ALARM_ST 0x10318
+#define WX_TS_ALARM_ST_DALARM BIT(1)
+#define WX_TS_ALARM_ST_ALARM BIT(0)
+
+/***************************** RDB registers *********************************/
+/* receive packet buffer */
+#define WX_RDB_PB_CTL 0x19000
+#define WX_RDB_PB_CTL_RXEN BIT(31) /* Enable Receiver */
+#define WX_RDB_PB_CTL_DISABLED BIT(0)
+/* statistic */
+#define WX_RDB_PFCMACDAL 0x19210
+#define WX_RDB_PFCMACDAH 0x19214
+
+/******************************* PSR Registers *******************************/
+/* psr control */
+#define WX_PSR_CTL 0x15000
+/* Header split receive */
+#define WX_PSR_CTL_SW_EN BIT(18)
+#define WX_PSR_CTL_RSC_ACK BIT(17)
+#define WX_PSR_CTL_RSC_DIS BIT(16)
+#define WX_PSR_CTL_PCSD BIT(13)
+#define WX_PSR_CTL_IPPCSE BIT(12)
+#define WX_PSR_CTL_BAM BIT(10)
+#define WX_PSR_CTL_UPE BIT(9)
+#define WX_PSR_CTL_MPE BIT(8)
+#define WX_PSR_CTL_MFE BIT(7)
+#define WX_PSR_CTL_MO_SHIFT 5
+#define WX_PSR_CTL_MO (0x3 << WX_PSR_CTL_MO_SHIFT)
+#define WX_PSR_CTL_TPE BIT(4)
+
+/* Management */
+#define WX_PSR_MNG_FLEX_SEL 0x1582C
+#define WX_PSR_MNG_FLEX_DW_L(_i) (0x15A00 + ((_i) * 16))
+#define WX_PSR_MNG_FLEX_DW_H(_i) (0x15A04 + ((_i) * 16))
+#define WX_PSR_MNG_FLEX_MSK(_i) (0x15A08 + ((_i) * 16))
+#define WX_PSR_LAN_FLEX_SEL 0x15B8C
+#define WX_PSR_LAN_FLEX_DW_L(_i) (0x15C00 + ((_i) * 16))
+#define WX_PSR_LAN_FLEX_DW_H(_i) (0x15C04 + ((_i) * 16))
+#define WX_PSR_LAN_FLEX_MSK(_i) (0x15C08 + ((_i) * 16))
+
+/************************************* ETH MAC *****************************/
+#define WX_MAC_RX_CFG 0x11004
+#define WX_MAC_RX_CFG_RE BIT(0)
+#define WX_MAC_RX_CFG_JE BIT(8)
+#define WX_MAC_PKT_FLT 0x11008
+#define WX_MAC_PKT_FLT_PR BIT(0) /* promiscuous mode */
+#define WX_MAC_RX_FLOW_CTRL 0x11090
+#define WX_MAC_RX_FLOW_CTRL_RFE BIT(0) /* receive fc enable */
+#define WX_MMC_CONTROL 0x11800
+#define WX_MMC_CONTROL_RSTONRD BIT(2) /* reset on read */
+
+/********************************* BAR registers ***************************/
+/* Interrupt Registers */
+#define WX_BME_CTL 0x12020
+#define WX_PX_MISC_IC 0x100
+#define WX_PX_IMS(_i) (0x140 + (_i) * 4)
+#define WX_PX_TRANSACTION_PENDING 0x168
+
+/* transmit DMA Registers */
+#define WX_PX_TR_CFG(_i) (0x03010 + ((_i) * 0x40))
+/* Transmit Config masks */
+#define WX_PX_TR_CFG_ENABLE BIT(0) /* Ena specific Tx Queue */
+#define WX_PX_TR_CFG_TR_SIZE_SHIFT 1 /* tx desc number per ring */
+#define WX_PX_TR_CFG_SWFLSH BIT(26) /* Tx Desc. wr-bk flushing */
+#define WX_PX_TR_CFG_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */
+#define WX_PX_TR_CFG_THRE_SHIFT 8
+
+/* Receive DMA Registers */
+#define WX_PX_RR_CFG(_i) (0x01010 + ((_i) * 0x40))
+/* PX_RR_CFG bit definitions */
+#define WX_PX_RR_CFG_RR_EN BIT(0)
+
+/* Number of 80 microseconds we wait for PCI Express master disable */
+#define WX_PCI_MASTER_DISABLE_TIMEOUT 80000
+
/* Bus parameters */
struct wx_bus_info {
u8 func;
u16 device;
};
+struct wx_thermal_sensor_data {
+ s16 temp;
+ s16 alarm_thresh;
+ s16 dalarm_thresh;
+};
+
+enum wx_mac_type {
+ wx_mac_unknown = 0,
+ wx_mac_sp,
+ wx_mac_em
+};
+
+struct wx_mac_info {
+ enum wx_mac_type type;
+ bool set_lben;
+ u32 max_tx_queues;
+ u32 max_rx_queues;
+ struct wx_thermal_sensor_data sensor;
+};
+
struct wx_hw {
u8 __iomem *hw_addr;
struct pci_dev *pdev;
struct wx_bus_info bus;
+ struct wx_mac_info mac;
u16 device_id;
u16 vendor_id;
u16 subsystem_device_id;
@@ -42,12 +160,40 @@ struct wx_hw {
u8 revision_id;
u16 oem_ssid;
u16 oem_svid;
+ bool adapter_stopped;
};
+#define WX_INTR_ALL (~0ULL)
+
/* register operations */
#define wr32(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
#define rd32(a, reg) readl((a)->hw_addr + (reg))
+static inline u32
+rd32m(struct wx_hw *wxhw, u32 reg, u32 mask)
+{
+ u32 val;
+
+ val = rd32(wxhw, reg);
+ return val & mask;
+}
+
+static inline void
+wr32m(struct wx_hw *wxhw, u32 reg, u32 mask, u32 field)
+{
+ u32 val;
+
+ val = rd32(wxhw, reg);
+ val = ((val & ~mask) | (field & mask));
+
+ wr32(wxhw, reg, val);
+}
+
+/* On some domestic CPU platforms, sometimes IO is not synchronized with
+ * flushing memory, here use readl() to flush PCI read and write.
+ */
+#define WX_WRITE_FLUSH(H) rd32(H, WX_MIS_PWR)
+
#define wx_err(wxhw, fmt, arg...) \
dev_err(&(wxhw)->pdev->dev, fmt, ##arg)
diff --git a/drivers/net/ethernet/wangxun/txgbe/Makefile b/drivers/net/ethernet/wangxun/txgbe/Makefile
index 431303ca75b4..78484c58b78b 100644
--- a/drivers/net/ethernet/wangxun/txgbe/Makefile
+++ b/drivers/net/ethernet/wangxun/txgbe/Makefile
@@ -6,4 +6,5 @@
obj-$(CONFIG_TXGBE) += txgbe.o
-txgbe-objs := txgbe_main.o
+txgbe-objs := txgbe_main.o \
+ txgbe_hw.o
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe.h b/drivers/net/ethernet/wangxun/txgbe/txgbe.h
index 9a97b85be3ac..f866d7fa7161 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe.h
@@ -4,13 +4,14 @@
#ifndef _TXGBE_H_
#define _TXGBE_H_
-#include "txgbe_type.h"
-
#define TXGBE_MAX_FDIR_INDICES 63
#define TXGBE_MAX_RX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1)
#define TXGBE_MAX_TX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1)
+#define TXGBE_SP_MAX_TX_QUEUES 128
+#define TXGBE_SP_MAX_RX_QUEUES 128
+
/* board specific private data structure */
struct txgbe_adapter {
u8 __iomem *io_addr; /* Mainly for iounmap use */
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
new file mode 100644
index 000000000000..a679db3f2e41
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */
+
+#include <linux/string.h>
+#include <linux/iopoll.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include "../libwx/wx_type.h"
+#include "../libwx/wx_hw.h"
+#include "txgbe_type.h"
+#include "txgbe_hw.h"
+#include "txgbe.h"
+
+/**
+ * txgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+static void txgbe_init_thermal_sensor_thresh(struct txgbe_hw *hw)
+{
+ struct wx_hw *wxhw = &hw->wxhw;
+ struct wx_thermal_sensor_data *data = &wxhw->mac.sensor;
+
+ memset(data, 0, sizeof(struct wx_thermal_sensor_data));
+
+ /* Only support thermal sensors attached to SP physical port 0 */
+ if (wxhw->bus.func)
+ return;
+
+ wr32(wxhw, TXGBE_TS_CTL, TXGBE_TS_CTL_EVAL_MD);
+
+ wr32(wxhw, WX_TS_INT_EN,
+ WX_TS_INT_EN_ALARM_INT_EN | WX_TS_INT_EN_DALARM_INT_EN);
+ wr32(wxhw, WX_TS_EN, WX_TS_EN_ENA);
+
+ data->alarm_thresh = 100;
+ wr32(wxhw, WX_TS_ALARM_THRE, 677);
+ data->dalarm_thresh = 90;
+ wr32(wxhw, WX_TS_DALARM_THRE, 614);
+}
+
+static void txgbe_reset_misc(struct txgbe_hw *hw)
+{
+ struct wx_hw *wxhw = &hw->wxhw;
+
+ wx_reset_misc(wxhw);
+ txgbe_init_thermal_sensor_thresh(hw);
+}
+
+/**
+ * txgbe_reset_hw - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
+ **/
+int txgbe_reset_hw(struct txgbe_hw *hw)
+{
+ struct wx_hw *wxhw = &hw->wxhw;
+ u32 reset = 0;
+ int status;
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ status = wx_stop_adapter(wxhw);
+ if (status != 0)
+ return status;
+
+ reset = WX_MIS_RST_LAN_RST(wxhw->bus.func);
+ wr32(wxhw, WX_MIS_RST, reset | rd32(wxhw, WX_MIS_RST));
+
+ WX_WRITE_FLUSH(wxhw);
+ usleep_range(10, 100);
+
+ status = wx_check_flash_load(wxhw, TXGBE_SPI_ILDR_STATUS_LAN_SW_RST(wxhw->bus.func));
+ if (status != 0)
+ return status;
+
+ txgbe_reset_misc(hw);
+ pci_set_master(wxhw->pdev);
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h
new file mode 100644
index 000000000000..155f18ea4b8c
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_hw.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */
+
+#ifndef _TXGBE_HW_H_
+#define _TXGBE_HW_H_
+
+int txgbe_reset_hw(struct txgbe_hw *hw);
+
+#endif /* _TXGBE_HW_H_ */
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
index 71ea197fe299..409103d5ac2b 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c
@@ -11,6 +11,8 @@
#include "../libwx/wx_type.h"
#include "../libwx/wx_hw.h"
+#include "txgbe_type.h"
+#include "txgbe_hw.h"
#include "txgbe.h"
char txgbe_driver_name[] = "txgbe";
@@ -92,6 +94,19 @@ static int txgbe_sw_init(struct txgbe_adapter *adapter)
return err;
}
+ switch (wxhw->device_id) {
+ case TXGBE_DEV_ID_SP1000:
+ case TXGBE_DEV_ID_WX1820:
+ wxhw->mac.type = wx_mac_sp;
+ break;
+ default:
+ wxhw->mac.type = wx_mac_unknown;
+ break;
+ }
+
+ wxhw->mac.max_tx_queues = TXGBE_SP_MAX_TX_QUEUES;
+ wxhw->mac.max_rx_queues = TXGBE_SP_MAX_RX_QUEUES;
+
return 0;
}
@@ -201,6 +216,12 @@ static int txgbe_probe(struct pci_dev *pdev,
if (err)
goto err_pci_release_regions;
+ err = txgbe_reset_hw(hw);
+ if (err) {
+ dev_err(&pdev->dev, "HW Init failed: %d\n", err);
+ goto err_pci_release_regions;
+ }
+
netdev->features |= NETIF_F_HIGHDMA;
pci_set_drvdata(pdev, adapter);
diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
index 1d1ead3d3c06..c891b0f07227 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h
@@ -33,12 +33,6 @@
#define TXGBE_ID_WX1820_MAC_SGMII 0x2060
#define TXGBE_ID_MAC_SGMII 0x60
-#define TXGBE_NCSI_SUP 0x8000
-#define TXGBE_NCSI_MASK 0x8000
-#define TXGBE_WOL_SUP 0x4000
-#define TXGBE_WOL_MASK 0x4000
-#define TXGBE_DEV_MASK 0xf0
-
/* Combined interface*/
#define TXGBE_ID_SFI_XAUI 0x50
@@ -50,6 +44,11 @@
#define TXGBE_SPI_ILDR_STATUS 0x10120
#define TXGBE_SPI_ILDR_STATUS_PERST BIT(0) /* PCIE_PERST is done */
#define TXGBE_SPI_ILDR_STATUS_PWRRST BIT(1) /* Power on reset is done */
+#define TXGBE_SPI_ILDR_STATUS_LAN_SW_RST(_i) BIT((_i) + 9) /* lan soft reset done */
+
+/* Sensors for PVT(Process Voltage Temperature) */
+#define TXGBE_TS_CTL 0x10300
+#define TXGBE_TS_CTL_EVAL_MD BIT(31)
struct txgbe_hw {
struct wx_hw wxhw;
--
2.27.0
Powered by blists - more mailing lists