| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <491aea68-bee6-3bd5-903d-1071b6c1cb73@huawei.com>
Date: Fri, 28 Oct 2022 09:21:09 +0800
From: shaozhengchao <shaozhengchao@...wei.com>
To: Cai Huoqing <cai.huoqing@...ux.dev>
CC: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Bin Chen <bin.chen@...igine.com>,
Krzysztof Wilczyński <kw@...ux.com>,
Peter Chen <peter.chen@...nel.org>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] net: hinic: Add control command support for VF PMD
driver in DPDK
On 2022/10/26 20:59, Cai Huoqing wrote:
> HINIC has a mailbox for PF-VF communication and the VF driver
> could send port control command to PF driver via mailbox.
>
> The control command only can be set to register in PF,
> so add support in PF driver for VF PMD driver control
> command when VF PMD driver work with linux PF driver.
>
> Signed-off-by: Cai Huoqing <cai.huoqing@...ux.dev>
> ---
> .../net/ethernet/huawei/hinic/hinic_hw_dev.h | 64 +++++++++++++++++++
> .../net/ethernet/huawei/hinic/hinic_sriov.c | 18 ++++++
> 2 files changed, 82 insertions(+)
>
> diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
> index abffd967a791..4f561e4e849a 100644
> --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
> +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
> @@ -53,11 +53,15 @@ enum hinic_port_cmd {
>
> HINIC_PORT_CMD_SET_PFC = 0x5,
>
> + HINIC_PORT_CMD_SET_ETS = 0x7,
> + HINIC_PORT_CMD_GET_ETS = 0x8,
> +
> HINIC_PORT_CMD_SET_MAC = 0x9,
> HINIC_PORT_CMD_GET_MAC = 0xA,
> HINIC_PORT_CMD_DEL_MAC = 0xB,
>
> HINIC_PORT_CMD_SET_RX_MODE = 0xC,
> + HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE = 0xD,
>
> HINIC_PORT_CMD_GET_PAUSE_INFO = 0x14,
> HINIC_PORT_CMD_SET_PAUSE_INFO = 0x15,
> @@ -81,6 +85,7 @@ enum hinic_port_cmd {
> HINIC_PORT_CMD_GET_RSS_TEMPLATE_INDIR_TBL = 0x25,
>
> HINIC_PORT_CMD_SET_PORT_STATE = 0x29,
> + HINIC_PORT_CMD_GET_PORT_STATE = 0x30,
>
> HINIC_PORT_CMD_SET_RSS_TEMPLATE_TBL = 0x2B,
> HINIC_PORT_CMD_GET_RSS_TEMPLATE_TBL = 0x2C,
> @@ -97,17 +102,29 @@ enum hinic_port_cmd {
>
> HINIC_PORT_CMD_RSS_CFG = 0x42,
>
> + HINIC_PORT_CMD_GET_PHY_TYPE = 0x44,
> +
> HINIC_PORT_CMD_FWCTXT_INIT = 0x45,
>
> HINIC_PORT_CMD_GET_LOOPBACK_MODE = 0x48,
> HINIC_PORT_CMD_SET_LOOPBACK_MODE = 0x49,
>
> + HINIC_PORT_CMD_GET_JUMBO_FRAME_SIZE = 0x4A,
> + HINIC_PORT_CMD_SET_JUMBO_FRAME_SIZE = 0x4B,
> +
> HINIC_PORT_CMD_ENABLE_SPOOFCHK = 0x4E,
>
> HINIC_PORT_CMD_GET_MGMT_VERSION = 0x58,
>
> + HINIC_PORT_CMD_GET_PORT_TYPE = 0x5B,
> +
> HINIC_PORT_CMD_SET_FUNC_STATE = 0x5D,
>
> + HINIC_PORT_CMD_GET_PORT_ID_BY_FUNC_ID = 0x5E,
> +
> + HINIC_PORT_CMD_GET_DMA_CS = 0x64,
> + HINIC_PORT_CMD_SET_DMA_CS = 0x65,
> +
> HINIC_PORT_CMD_GET_GLOBAL_QPN = 0x66,
>
> HINIC_PORT_CMD_SET_VF_RATE = 0x69,
> @@ -121,25 +138,72 @@ enum hinic_port_cmd {
>
> HINIC_PORT_CMD_SET_RQ_IQ_MAP = 0x73,
>
> + HINIC_PORT_CMD_SET_PFC_THD = 0x75,
> +
> HINIC_PORT_CMD_LINK_STATUS_REPORT = 0xA0,
>
> + HINIC_PORT_CMD_SET_LOSSLESS_ETH = 0xA3,
> +
> HINIC_PORT_CMD_UPDATE_MAC = 0xA4,
>
> HINIC_PORT_CMD_GET_CAP = 0xAA,
>
> + HINIC_PORT_CMD_UP_TC_ADD_FLOW = 0xAF,
> + HINIC_PORT_CMD_UP_TC_DEL_FLOW = 0xB0,
> + HINIC_PORT_CMD_UP_TC_GET_FLOW = 0xB1,
> +
> + HINIC_PORT_CMD_UP_TC_FLUSH_TCAM = 0xB2,
> +
> + HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK = 0xB3,
> +
> + HINIC_PORT_CMD_UP_TC_ENABLE = 0xB4,
> +
> + HINIC_PORT_CMD_UP_TC_GET_TCAM_BLOCK = 0xB5,
> +
> + HINIC_PORT_CMD_SET_IPSU_MAC = 0xCB,
> + HINIC_PORT_CMD_GET_IPSU_MAC = 0xCC,
> +
> + HINIC_PORT_CMD_SET_XSFP_STATUS = 0xD4,
> HINIC_PORT_CMD_GET_LINK_MODE = 0xD9,
>
> HINIC_PORT_CMD_SET_SPEED = 0xDA,
>
> HINIC_PORT_CMD_SET_AUTONEG = 0xDB,
>
> + HINIC_PORT_CMD_CLEAR_QP_RES = 0xDD,
> +
> + HINIC_PORT_CMD_SET_SUPER_CQE = 0xDE,
> +
> + HINIC_PORT_CMD_SET_VF_COS = 0xDF,
> + HINIC_PORT_CMD_GET_VF_COS = 0xE1,
> +
> + HINIC_PORT_CMD_CABLE_PLUG_EVENT = 0xE5,
> +
> + HINIC_PORT_CMD_LINK_ERR_EVENT = 0xE6,
> +
> + HINIC_PORT_CMD_SET_COS_UP_MAP = 0xE8,
> +
> + HINIC_PORT_CMD_RESET_LINK_CFG = 0xEB,
> +
> HINIC_PORT_CMD_GET_STD_SFP_INFO = 0xF0,
>
> + HINIC_PORT_CMD_FORCE_PKT_DROP = 0xF3,
> +
> HINIC_PORT_CMD_SET_LRO_TIMER = 0xF4,
>
> + HINIC_PORT_CMD_SET_VHD_CFG = 0xF7,
> +
> + HINIC_PORT_CMD_SET_LINK_FOLLOW = 0xF8,
> +
> HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 0xF9,
>
> HINIC_PORT_CMD_GET_SFP_ABS = 0xFB,
> +
> + HINIC_PORT_CMD_Q_FILTER = 0xFC,
> +
> + HINIC_PORT_CMD_TCAM_FILTER = 0xFE,
> +
> + HINIC_PORT_CMD_SET_VLAN_FILTER = 0xFF
> };
>
> /* cmd of mgmt CPU message for HILINK module */
> diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
> index a5f08b969e3f..bba41994dee6 100644
> --- a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
> +++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c
> @@ -489,6 +489,24 @@ static struct vf_cmd_check_handle nic_cmd_support_vf[] = {
> {HINIC_PORT_CMD_UPDATE_MAC, hinic_mbox_check_func_id_8B},
> {HINIC_PORT_CMD_GET_CAP, hinic_mbox_check_func_id_8B},
> {HINIC_PORT_CMD_GET_LINK_MODE, hinic_mbox_check_func_id_8B},
> + {HINIC_PORT_CMD_GET_VF_COS, NULL},
> + {HINIC_PORT_CMD_SET_VHD_CFG, hinic_mbox_check_func_id_8B},
> + {HINIC_PORT_CMD_SET_VLAN_FILTER, hinic_mbox_check_func_id_8B},
> + {HINIC_PORT_CMD_Q_FILTER, hinic_mbox_check_func_id_8B},
> + {HINIC_PORT_CMD_TCAM_FILTER, NULL},
> + {HINIC_PORT_CMD_UP_TC_ADD_FLOW, NULL},
> + {HINIC_PORT_CMD_UP_TC_DEL_FLOW, NULL},
> + {HINIC_PORT_CMD_UP_TC_FLUSH_TCAM, hinic_mbox_check_func_id_8B},
> + {HINIC_PORT_CMD_UP_TC_CTRL_TCAM_BLOCK, hinic_mbox_check_func_id_8B},
> + {HINIC_PORT_CMD_UP_TC_ENABLE, hinic_mbox_check_func_id_8B},
> + {HINIC_PORT_CMD_CABLE_PLUG_EVENT, NULL},
> + {HINIC_PORT_CMD_LINK_ERR_EVENT, NULL},
> + {HINIC_PORT_CMD_SET_PORT_STATE, hinic_mbox_check_func_id_8B},
> + {HINIC_PORT_CMD_SET_ETS, NULL},
> + {HINIC_PORT_CMD_SET_ANTI_ATTACK_RATE, NULL},
> + {HINIC_PORT_CMD_RESET_LINK_CFG, hinic_mbox_check_func_id_8B},
> + {HINIC_PORT_CMD_SET_LINK_FOLLOW, NULL},
> + {HINIC_PORT_CMD_CLEAR_QP_RES, NULL},
> };
>
> #define CHECK_IPSU_15BIT 0X8000
Hi Cai:
I guess how do you get the opcodes of these commands? Have they
all been tested? Is the test result consistent with the driver released
on the Huawei support website?
Zhengchao Shao
Powered by blists - more mailing lists