| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221102163954.279266-2-danielj@nvidia.com>
Date: Wed, 2 Nov 2022 18:39:53 +0200
From: Daniel Jurgens <danielj@...dia.com>
To: <netdev@...r.kernel.org>, <davem@...emloft.net>, <kuba@...nel.org>
CC: <parav@...dia.com>, <saeedm@...dia.com>, <yishaih@...dia.com>,
"Daniel Jurgens" <danielj@...dia.com>, Jiri Pirko <jiri@...dia.com>
Subject: [PATCH 1/2] devlink: Expose port function commands to control roce
From: Yishai Hadas <yishaih@...dia.com>
Expose port function commands to turn on / off roce, this is used to
control the port roce device capabilities.
When roce is disabled for a function of the port, function cannot create
any roce specific resources (e.g GID table).
It also saves system memory utilization. For example disabling roce on a
VF/SF saves 1 Mbytes of system memory per function.
Example of a PCI VF port which supports function configuration:
Set roce of the VF's port function.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 roce on
$ devlink port function set pci/0000:06:00.0/2 roce off
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:11:22:33:44:55 roce off
Signed-off-by: Yishai Hadas <yishaih@...dia.com>
Signed-off-by: Daniel Jurgens <danielj@...dia.com>
Reviewed-by: Parav Pandit <parav@...dia.com>
Reviewed-by: Jiri Pirko <jiri@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
.../networking/devlink/devlink-port.rst | 5 +-
include/net/devlink.h | 20 ++++++
include/uapi/linux/devlink.h | 1 +
net/core/devlink.c | 61 +++++++++++++++++++
4 files changed, 86 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/devlink/devlink-port.rst b/Documentation/networking/devlink/devlink-port.rst
index 7627b1da01f2..fd191622ab68 100644
--- a/Documentation/networking/devlink/devlink-port.rst
+++ b/Documentation/networking/devlink/devlink-port.rst
@@ -110,7 +110,7 @@ devlink ports for both the controllers.
Function configuration
======================
-A user can configure the function attribute before enumerating the PCI
+A user can configure one or more function attributes before enumerating the PCI
function. Usually it means, user should configure function attribute
before a bus specific device for the function is created. However, when
SRIOV is enabled, virtual function devices are created on the PCI bus.
@@ -122,6 +122,9 @@ A user may set the hardware address of the function using
'devlink port function set hw_addr' command. For Ethernet port function
this means a MAC address.
+A user may set also the roce capability of the function using
+'devlink port function set roce' command.
+
Subfunction
============
diff --git a/include/net/devlink.h b/include/net/devlink.h
index ba6b8b094943..c26edd5c72fa 100644
--- a/include/net/devlink.h
+++ b/include/net/devlink.h
@@ -1414,6 +1414,26 @@ struct devlink_ops {
int (*port_function_hw_addr_set)(struct devlink_port *port,
const u8 *hw_addr, int hw_addr_len,
struct netlink_ext_ack *extack);
+ /**
+ * @port_function_roce_get: Port function's roce get function.
+ *
+ * Should be used by device drivers to report the roce state of
+ * a function managed by the devlink port. Driver should return
+ * -EOPNOTSUPP if it doesn't support port function handling for
+ * a particular port.
+ */
+ int (*port_function_roce_get)(struct devlink_port *port, bool *on,
+ struct netlink_ext_ack *extack);
+ /**
+ * @port_function_roce_set: Port function's roce set function.
+ *
+ * Should be used by device drivers to enable/disable the roce state of
+ * a function managed by the devlink port. Driver should return
+ * -EOPNOTSUPP if it doesn't support port function handling for
+ * a particular port.
+ */
+ int (*port_function_roce_set)(struct devlink_port *port, bool on,
+ struct netlink_ext_ack *extack);
/**
* port_new() - Add a new port function of a specified flavor
* @devlink: Devlink instance
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 2f24b53a87a5..16efff56fc0d 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -658,6 +658,7 @@ enum devlink_port_function_attr {
DEVLINK_PORT_FUNCTION_ATTR_HW_ADDR, /* binary */
DEVLINK_PORT_FN_ATTR_STATE, /* u8 */
DEVLINK_PORT_FN_ATTR_OPSTATE, /* u8 */
+ DEVLINK_PORT_FN_ATTR_ROCE, /* u8 */
__DEVLINK_PORT_FUNCTION_ATTR_MAX,
DEVLINK_PORT_FUNCTION_ATTR_MAX = __DEVLINK_PORT_FUNCTION_ATTR_MAX - 1
diff --git a/net/core/devlink.c b/net/core/devlink.c
index 89baa7c0938b..4f9d81888699 100644
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -199,6 +199,7 @@ static const struct nla_policy devlink_function_nl_policy[DEVLINK_PORT_FUNCTION_
[DEVLINK_PORT_FN_ATTR_STATE] =
NLA_POLICY_RANGE(NLA_U8, DEVLINK_PORT_FN_STATE_INACTIVE,
DEVLINK_PORT_FN_STATE_ACTIVE),
+ [DEVLINK_PORT_FN_ATTR_ROCE] = NLA_POLICY_RANGE(NLA_U8, 0, 1),
};
static const struct nla_policy devlink_selftest_nl_policy[DEVLINK_ATTR_SELFTEST_ID_MAX + 1] = {
@@ -691,6 +692,33 @@ devlink_sb_tc_index_get_from_attrs(struct devlink_sb *devlink_sb,
return 0;
}
+static int devlink_port_function_roce_fill(const struct devlink_ops *ops,
+ struct devlink_port *port,
+ struct sk_buff *msg,
+ struct netlink_ext_ack *extack,
+ bool *msg_updated)
+{
+ bool on;
+ int err;
+
+ if (!ops->port_function_roce_get)
+ return 0;
+
+ err = ops->port_function_roce_get(port, &on, extack);
+ if (err) {
+ if (err == -EOPNOTSUPP)
+ return 0;
+ return err;
+ }
+
+ err = nla_put_u8(msg, DEVLINK_PORT_FN_ATTR_ROCE, on);
+ if (err)
+ return err;
+
+ *msg_updated = true;
+ return 0;
+}
+
static int
devlink_sb_tc_index_get_from_info(struct devlink_sb *devlink_sb,
struct genl_info *info,
@@ -1248,6 +1276,25 @@ static int devlink_port_fn_state_fill(const struct devlink_ops *ops,
return 0;
}
+static int
+devlink_port_fn_roce_set(struct devlink_port *port,
+ const struct nlattr *attr,
+ struct netlink_ext_ack *extack)
+{
+ const struct devlink_ops *ops = port->devlink->ops;
+ bool on;
+
+ on = nla_get_u8(attr);
+
+ if (!ops->port_function_roce_set) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Port doesn't support roce function attribute");
+ return -EOPNOTSUPP;
+ }
+
+ return ops->port_function_roce_set(port, on, extack);
+}
+
static int
devlink_nl_port_function_attrs_put(struct sk_buff *msg, struct devlink_port *port,
struct netlink_ext_ack *extack)
@@ -1266,6 +1313,12 @@ devlink_nl_port_function_attrs_put(struct sk_buff *msg, struct devlink_port *por
&msg_updated);
if (err)
goto out;
+
+ err = devlink_port_function_roce_fill(ops, port, msg, extack,
+ &msg_updated);
+ if (err)
+ goto out;
+
err = devlink_port_fn_state_fill(ops, port, msg, extack, &msg_updated);
out:
if (err || !msg_updated)
@@ -1670,6 +1723,14 @@ static int devlink_port_function_set(struct devlink_port *port,
if (err)
return err;
}
+
+ attr = tb[DEVLINK_PORT_FN_ATTR_ROCE];
+ if (attr) {
+ err = devlink_port_fn_roce_set(port, attr, extack);
+ if (err)
+ return err;
+ }
+
/* Keep this as the last function attribute set, so that when
* multiple port function attributes are set along with state,
* Those can be applied first before activating the state.
--
2.27.0
Powered by blists - more mailing lists