| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 8 Nov 2022 12:41:52 -0800
From: Veerasenareddy Burru <vburru@...vell.com>
To: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<lironh@...vell.com>, <aayarekar@...vell.com>,
<sedara@...vell.com>, <sburla@...vell.com>
CC: <linux-doc@...r.kernel.org>,
Veerasenareddy Burru <vburru@...vell.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
"Jonathan Corbet" <corbet@....net>, Andrew Lunn <andrew@...n.ch>,
Lorenzo Bianconi <lorenzo@...nel.org>
Subject: [PATCH net-next 1/8] octeon_ep_vf: Add driver framework and device initialization
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC VF.
Add implementation to load module, initilaize, register network device,
cleanup and unload module.
Signed-off-by: Veerasenareddy Burru <vburru@...vell.com>
Signed-off-by: Sathesh Edara <sedara@...vell.com>
Signed-off-by: Satananda Burla <sburla@...vell.com>
---
.../ethernet/marvell/octeon_ep_vf.rst | 19 +
drivers/net/ethernet/marvell/Kconfig | 1 +
drivers/net/ethernet/marvell/Makefile | 1 +
.../net/ethernet/marvell/octeon_ep_vf/Kconfig | 19 +
.../ethernet/marvell/octeon_ep_vf/Makefile | 9 +
.../marvell/octeon_ep_vf/octep_vf_cn9k.c | 158 ++++++
.../marvell/octeon_ep_vf/octep_vf_config.h | 155 ++++++
.../marvell/octeon_ep_vf/octep_vf_main.c | 502 ++++++++++++++++++
.../marvell/octeon_ep_vf/octep_vf_main.h | 303 +++++++++++
.../marvell/octeon_ep_vf/octep_vf_mbox.c | 69 +++
.../marvell/octeon_ep_vf/octep_vf_mbox.h | 19 +
.../marvell/octeon_ep_vf/octep_vf_regs_cn9k.h | 154 ++++++
.../marvell/octeon_ep_vf/octep_vf_rx.c | 42 ++
.../marvell/octeon_ep_vf/octep_vf_rx.h | 199 +++++++
.../marvell/octeon_ep_vf/octep_vf_tx.c | 43 ++
.../marvell/octeon_ep_vf/octep_vf_tx.h | 242 +++++++++
16 files changed, 1935 insertions(+)
create mode 100644 Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/Kconfig
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/Makefile
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cn9k.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_config.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_mbox.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_mbox.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_regs_cn9k.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_tx.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_tx.h
diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst
new file mode 100644
index 000000000000..258229610f3e
--- /dev/null
+++ b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst
@@ -0,0 +1,19 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+=======================================================================
+Linux kernel networking driver for Marvell's Octeon PCI Endpoint NIC VF
+=======================================================================
+
+Network driver for Marvell's Octeon PCI EndPoint NIC VF.
+Copyright (c) 2020 Marvell International Ltd.
+
+Overview
+========
+This driver implements networking functionality of Marvell's Octeon PCI
+EndPoint NIC VF.
+
+Supported Devices
+=================
+Currently, this driver support following devices:
+ * Network controller: Cavium, Inc. Device b203
+ * Network controller: Cavium, Inc. Device b403
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index f58a1c0144ba..50f7c59e8a04 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -179,6 +179,7 @@ config SKY2_DEBUG
source "drivers/net/ethernet/marvell/octeontx2/Kconfig"
source "drivers/net/ethernet/marvell/octeon_ep/Kconfig"
+source "drivers/net/ethernet/marvell/octeon_ep_vf/Kconfig"
source "drivers/net/ethernet/marvell/prestera/Kconfig"
endif # NET_VENDOR_MARVELL
diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile
index ceba4aa4f026..a399defe25fd 100644
--- a/drivers/net/ethernet/marvell/Makefile
+++ b/drivers/net/ethernet/marvell/Makefile
@@ -12,5 +12,6 @@ obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_SKGE) += skge.o
obj-$(CONFIG_SKY2) += sky2.o
obj-y += octeon_ep/
+obj-y += octeon_ep_vf/
obj-y += octeontx2/
obj-y += prestera/
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/Kconfig b/drivers/net/ethernet/marvell/octeon_ep_vf/Kconfig
new file mode 100644
index 000000000000..dbd1267bda0c
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Marvell's Octeon PCI Endpoint NIC VF Driver Configuration
+#
+
+config OCTEON_EP_VF
+ tristate "Marvell Octeon PCI Endpoint NIC VF Driver"
+ depends on 64BIT
+ depends on PCI
+ help
+ This driver supports networking functionality of Marvell's
+ Octeon PCI Endpoint NIC VF.
+
+ To know the list of devices supported by this driver, refer
+ documentation in
+ <file:Documentation/networking/device_drivers/ethernet/marvell/octeon_ep_vf.rst>.
+
+ To compile this drivers as a module, choose M here. Name of the
+ module is octeon_ep_vf.
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/Makefile b/drivers/net/ethernet/marvell/octeon_ep_vf/Makefile
new file mode 100644
index 000000000000..d958640ba9c9
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Network driver for Marvell's Octeon PCI Endpoint NIC VF
+#
+
+obj-$(CONFIG_OCTEON_EP_VF) += octeon_ep_vf.o
+
+octeon_ep_vf-y := octep_vf_main.o octep_vf_cn9k.o octep_vf_tx.o octep_vf_rx.o \
+ octep_vf_mbox.o
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cn9k.c b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cn9k.c
new file mode 100644
index 000000000000..fae48a98694d
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_cn9k.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include "octep_vf_config.h"
+#include "octep_vf_main.h"
+#include "octep_vf_regs_cn9k.h"
+
+/* Reset all hardware Tx/Rx queues */
+static void octep_vf_reset_io_queues_cn93(struct octep_vf_device *oct)
+{
+}
+
+/* Initialize configuration limits and initial active config */
+static void octep_vf_init_config_cn93_vf(struct octep_vf_device *oct)
+{
+ struct octep_vf_config *conf = oct->conf;
+ u64 reg_val;
+
+ reg_val = octep_vf_read_csr64(oct, CN93_VF_SDP_R_IN_CONTROL(0));
+ conf->ring_cfg.max_io_rings = (reg_val >> CN93_VF_R_IN_CTL_RPVF_POS) &
+ CN93_VF_R_IN_CTL_RPVF_MASK;
+ conf->ring_cfg.active_io_rings = conf->ring_cfg.max_io_rings;
+
+ conf->iq.num_descs = OCTEP_VF_IQ_MAX_DESCRIPTORS;
+ conf->iq.instr_type = OCTEP_VF_64BYTE_INSTR;
+ conf->iq.pkind = 0;
+ conf->iq.db_min = OCTEP_VF_DB_MIN;
+ conf->iq.intr_threshold = OCTEP_VF_IQ_INTR_THRESHOLD;
+
+ conf->oq.num_descs = OCTEP_VF_OQ_MAX_DESCRIPTORS;
+ conf->oq.buf_size = OCTEP_VF_OQ_BUF_SIZE;
+ conf->oq.refill_threshold = OCTEP_VF_OQ_REFILL_THRESHOLD;
+ conf->oq.oq_intr_pkt = OCTEP_VF_OQ_INTR_PKT_THRESHOLD;
+ conf->oq.oq_intr_time = OCTEP_VF_OQ_INTR_TIME_THRESHOLD;
+
+ conf->msix_cfg.ioq_msix = conf->ring_cfg.active_io_rings;
+}
+
+/* Setup registers for a hardware Tx Queue */
+static void octep_vf_setup_iq_regs_cn93(struct octep_vf_device *oct, int iq_no)
+{
+}
+
+/* Setup registers for a hardware Rx Queue */
+static void octep_vf_setup_oq_regs_cn93(struct octep_vf_device *oct, int oq_no)
+{
+}
+
+/* Setup registers for a VF mailbox */
+static void octep_vf_setup_mbox_regs_cn93(struct octep_vf_device *oct, int q_no)
+{
+}
+
+/* Tx/Rx queue interrupt handler */
+static irqreturn_t octep_vf_ioq_intr_handler_cn93(void *data)
+{
+ return IRQ_HANDLED;
+}
+
+/* Re-initialize Octeon hardware registers */
+static void octep_vf_reinit_regs_cn93(struct octep_vf_device *oct)
+{
+}
+
+/* Enable all interrupts */
+static void octep_vf_enable_interrupts_cn93(struct octep_vf_device *oct)
+{
+}
+
+/* Disable all interrupts */
+static void octep_vf_disable_interrupts_cn93(struct octep_vf_device *oct)
+{
+}
+
+/* Get new Octeon Read Index: index of descriptor that Octeon reads next. */
+static u32 octep_vf_update_iq_read_index_cn93(struct octep_vf_iq *iq)
+{
+ return 0;
+}
+
+/* Enable a hardware Tx Queue */
+static void octep_vf_enable_iq_cn93(struct octep_vf_device *oct, int iq_no)
+{
+}
+
+/* Enable a hardware Rx Queue */
+static void octep_vf_enable_oq_cn93(struct octep_vf_device *oct, int oq_no)
+{
+}
+
+/* Enable all hardware Tx/Rx Queues assigned to VF */
+static void octep_vf_enable_io_queues_cn93(struct octep_vf_device *oct)
+{
+}
+
+/* Disable a hardware Tx Queue assigned to VF */
+static void octep_vf_disable_iq_cn93(struct octep_vf_device *oct, int iq_no)
+{
+}
+
+/* Disable a hardware Rx Queue assigned to VF */
+static void octep_vf_disable_oq_cn93(struct octep_vf_device *oct, int oq_no)
+{
+}
+
+/* Disable all hardware Tx/Rx Queues assigned to VF */
+static void octep_vf_disable_io_queues_cn93(struct octep_vf_device *oct)
+{
+}
+
+/* Dump hardware registers (including Tx/Rx queues) for debugging. */
+static void octep_vf_dump_registers_cn93(struct octep_vf_device *oct)
+{
+}
+
+/**
+ * octep_vf_device_setup_cn93() - Setup Octeon device.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * - initialize hardware operations.
+ * - get target side pcie port number for the device.
+ * - set initial configuration and max limits.
+ */
+void octep_vf_device_setup_cn93(struct octep_vf_device *oct)
+{
+ oct->hw_ops.setup_iq_regs = octep_vf_setup_iq_regs_cn93;
+ oct->hw_ops.setup_oq_regs = octep_vf_setup_oq_regs_cn93;
+ oct->hw_ops.setup_mbox_regs = octep_vf_setup_mbox_regs_cn93;
+
+ oct->hw_ops.ioq_intr_handler = octep_vf_ioq_intr_handler_cn93;
+ oct->hw_ops.reinit_regs = octep_vf_reinit_regs_cn93;
+
+ oct->hw_ops.enable_interrupts = octep_vf_enable_interrupts_cn93;
+ oct->hw_ops.disable_interrupts = octep_vf_disable_interrupts_cn93;
+
+ oct->hw_ops.update_iq_read_idx = octep_vf_update_iq_read_index_cn93;
+
+ oct->hw_ops.enable_iq = octep_vf_enable_iq_cn93;
+ oct->hw_ops.enable_oq = octep_vf_enable_oq_cn93;
+ oct->hw_ops.enable_io_queues = octep_vf_enable_io_queues_cn93;
+
+ oct->hw_ops.disable_iq = octep_vf_disable_iq_cn93;
+ oct->hw_ops.disable_oq = octep_vf_disable_oq_cn93;
+ oct->hw_ops.disable_io_queues = octep_vf_disable_io_queues_cn93;
+ oct->hw_ops.reset_io_queues = octep_vf_reset_io_queues_cn93;
+
+ oct->hw_ops.dump_registers = octep_vf_dump_registers_cn93;
+ octep_vf_init_config_cn93_vf(oct);
+}
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_config.h b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_config.h
new file mode 100644
index 000000000000..60456499f1cc
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_config.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#ifndef _OCTEP_VF_CONFIG_H_
+#define _OCTEP_VF_CONFIG_H_
+
+/* Tx instruction types by length */
+#define OCTEP_VF_32BYTE_INSTR 32
+#define OCTEP_VF_64BYTE_INSTR 64
+
+/* Tx Queue: maximum descriptors per ring */
+#define OCTEP_VF_IQ_MAX_DESCRIPTORS 1024
+/* Minimum input (Tx) requests to be enqueued to ring doorbell */
+#define OCTEP_VF_DB_MIN 1
+/* Packet threshold for Tx queue interrupt */
+#define OCTEP_VF_IQ_INTR_THRESHOLD 0x0
+
+/* Rx Queue: maximum descriptors per ring */
+#define OCTEP_VF_OQ_MAX_DESCRIPTORS 1024
+
+/* Rx buffer size: Use page size buffers.
+ * Build skb from allocated page buffer once the packet is received.
+ * When a gathered packet is received, make head page as skb head and
+ * page buffers in consecutive Rx descriptors as fragments.
+ */
+#define OCTEP_VF_OQ_BUF_SIZE (SKB_WITH_OVERHEAD(PAGE_SIZE))
+#define OCTEP_VF_OQ_PKTS_PER_INTR 128
+#define OCTEP_VF_OQ_REFILL_THRESHOLD (OCTEP_VF_OQ_MAX_DESCRIPTORS / 4)
+
+#define OCTEP_VF_OQ_INTR_PKT_THRESHOLD 1
+#define OCTEP_VF_OQ_INTR_TIME_THRESHOLD 10
+
+#define OCTEP_VF_MSIX_NAME_SIZE (IFNAMSIZ + 32)
+
+/* Tx Queue wake threshold
+ * wakeup a stopped Tx queue if minimum 2 descriptors are available.
+ * Even a skb with fragments consume only one Tx queue descriptor entry.
+ */
+#define OCTEP_VF_WAKE_QUEUE_THRESHOLD 2
+
+/* Minimum MTU supported by Octeon network interface */
+#define OCTEP_VF_MIN_MTU ETH_MIN_MTU
+/* Maximum MTU supported by Octeon interface*/
+#define OCTEP_VF_MAX_MTU (10000 - (ETH_HLEN + ETH_FCS_LEN))
+/* Default MTU */
+#define OCTEP_VF_DEFAULT_MTU 1500
+
+/* Macros to get octeon config params */
+#define CFG_GET_IQ_CFG(cfg) ((cfg)->iq)
+#define CFG_GET_IQ_NUM_DESC(cfg) ((cfg)->iq.num_descs)
+#define CFG_GET_IQ_INSTR_TYPE(cfg) ((cfg)->iq.instr_type)
+#define CFG_GET_IQ_PKIND(cfg) ((cfg)->iq.pkind)
+#define CFG_GET_IQ_INSTR_SIZE(cfg) (64)
+#define CFG_GET_IQ_DB_MIN(cfg) ((cfg)->iq.db_min)
+#define CFG_GET_IQ_INTR_THRESHOLD(cfg) ((cfg)->iq.intr_threshold)
+
+#define CFG_GET_OQ_NUM_DESC(cfg) ((cfg)->oq.num_descs)
+#define CFG_GET_OQ_BUF_SIZE(cfg) ((cfg)->oq.buf_size)
+#define CFG_GET_OQ_REFILL_THRESHOLD(cfg) ((cfg)->oq.refill_threshold)
+#define CFG_GET_OQ_INTR_PKT(cfg) ((cfg)->oq.oq_intr_pkt)
+#define CFG_GET_OQ_INTR_TIME(cfg) ((cfg)->oq.oq_intr_time)
+
+#define CFG_GET_PORTS_ACTIVE_IO_RINGS(cfg) ((cfg)->ring_cfg.active_io_rings)
+#define CFG_GET_PORTS_MAX_IO_RINGS(cfg) ((cfg)->ring_cfg.max_io_rings)
+
+#define CFG_GET_DPI_PKIND(cfg) ((cfg)->core_cfg.dpi_pkind)
+#define CFG_GET_CORE_TICS_PER_US(cfg) ((cfg)->core_cfg.core_tics_per_us)
+#define CFG_GET_COPROC_TICS_PER_US(cfg) ((cfg)->core_cfg.coproc_tics_per_us)
+
+#define CFG_GET_IOQ_MSIX(cfg) ((cfg)->msix_cfg.ioq_msix)
+
+/* Hardware Tx Queue configuration. */
+struct octep_vf_iq_config {
+ /* Size of the Input queue (number of commands) */
+ u16 num_descs;
+
+ /* Command size - 32 or 64 bytes */
+ u16 instr_type;
+
+ /* pkind for packets sent to Octeon */
+ u16 pkind;
+
+ /* Minimum number of commands pending to be posted to Octeon before driver
+ * hits the Input queue doorbell.
+ */
+ u16 db_min;
+
+ /* Trigger the IQ interrupt when processed cmd count reaches
+ * this level.
+ */
+ u32 intr_threshold;
+};
+
+/* Hardware Rx Queue configuration. */
+struct octep_vf_oq_config {
+ /* Size of Output queue (number of descriptors) */
+ u16 num_descs;
+
+ /* Size of buffer in this Output queue. */
+ u16 buf_size;
+
+ /* The number of buffers that were consumed during packet processing
+ * by the driver on this Output queue before the driver attempts to
+ * replenish the descriptor ring with new buffers.
+ */
+ u16 refill_threshold;
+
+ /* Interrupt Coalescing (Packet Count). Octeon will interrupt the host
+ * only if it sent as many packets as specified by this field.
+ * The driver usually does not use packet count interrupt coalescing.
+ */
+ u32 oq_intr_pkt;
+
+ /* Interrupt Coalescing (Time Interval). Octeon will interrupt the host
+ * if at least one packet was sent in the time interval specified by
+ * this field. The driver uses time interval interrupt coalescing by
+ * default. The time is specified in microseconds.
+ */
+ u32 oq_intr_time;
+};
+
+/* Tx/Rx configuration */
+struct octep_vf_ring_config {
+ /* Max number of IOQs */
+ u16 max_io_rings;
+
+ /* Number of active IOQs */
+ u16 active_io_rings;
+};
+
+/* Octeon MSI-x config. */
+struct octep_vf_msix_config {
+ /* Number of IOQ interrupts */
+ u16 ioq_msix;
+};
+
+/* Data Structure to hold configuration limits and active config */
+struct octep_vf_config {
+ /* Input Queue attributes. */
+ struct octep_vf_iq_config iq;
+
+ /* Output Queue attributes. */
+ struct octep_vf_oq_config oq;
+
+ /* MSI-X interrupt config */
+ struct octep_vf_msix_config msix_cfg;
+
+ /* NIC VF ring Configuration */
+ struct octep_vf_ring_config ring_cfg;
+};
+#endif /* _OCTEP_VF_CONFIG_H_ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c
new file mode 100644
index 000000000000..0fc493bd0b02
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c
@@ -0,0 +1,502 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/vmalloc.h>
+#include <linux/version.h>
+
+#include "octep_vf_config.h"
+#include "octep_vf_main.h"
+
+struct workqueue_struct *octep_vf_wq;
+
+/* Supported Devices */
+static const struct pci_device_id octep_vf_pci_id_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, OCTEP_PCI_DEVICE_ID_CN93_VF)},
+ {PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, OCTEP_PCI_DEVICE_ID_CNF95N_VF)},
+ {0, },
+};
+MODULE_DEVICE_TABLE(pci, octep_vf_pci_id_tbl);
+
+MODULE_AUTHOR("Veerasenareddy Burru <vburru@...vell.com>");
+MODULE_DESCRIPTION(OCTEP_VF_DRV_STRING);
+MODULE_LICENSE("GPL");
+
+static void octep_vf_link_up(struct net_device *netdev)
+{
+ netif_carrier_on(netdev);
+ netif_tx_start_all_queues(netdev);
+}
+
+static void octep_vf_set_rx_state(struct octep_vf_device *oct, bool up)
+{
+ int err;
+
+ err = octep_vf_mbox_set_rx_state(oct, up);
+ if (err)
+ netdev_err(oct->netdev, "Set Rx state to %d failed with err:%d\n", err, up);
+}
+
+static int octep_vf_get_link_status(struct octep_vf_device *oct)
+{
+ int err;
+
+ err = octep_vf_mbox_get_link_status(oct, &oct->link_info.oper_up);
+ if (err)
+ netdev_err(oct->netdev, "Get link status failed with err:%d\n", err);
+ return oct->link_info.oper_up;
+}
+
+static void octep_vf_set_link_status(struct octep_vf_device *oct, bool up)
+{
+ int err;
+
+ err = octep_vf_mbox_set_link_status(oct, up);
+ if (err) {
+ netdev_err(oct->netdev, "Set link status to %d failed with err:%d\n", err, up);
+ return;
+ }
+ oct->link_info.oper_up = up;
+}
+
+/**
+ * octep_vf_open() - start the octeon network device.
+ *
+ * @netdev: pointer to kernel network device.
+ *
+ * setup Tx/Rx queues, interrupts and enable hardware operation of Tx/Rx queues
+ * and interrupts..
+ *
+ * Return: 0, on successfully setting up device and bring it up.
+ * -1, on any error.
+ */
+static int octep_vf_open(struct net_device *netdev)
+{
+ struct octep_vf_device *oct = netdev_priv(netdev);
+ int err, ret;
+
+ netdev_info(netdev, "Starting netdev ...\n");
+ netif_carrier_off(netdev);
+
+ oct->hw_ops.reset_io_queues(oct);
+
+ if (octep_vf_setup_iqs(oct))
+ goto setup_iq_err;
+ if (octep_vf_setup_oqs(oct))
+ goto setup_oq_err;
+
+ err = netif_set_real_num_tx_queues(netdev, oct->num_oqs);
+ if (err)
+ goto set_queues_err;
+ err = netif_set_real_num_rx_queues(netdev, oct->num_iqs);
+ if (err)
+ goto set_queues_err;
+
+ oct->link_info.admin_up = 1;
+ octep_vf_set_rx_state(oct, true);
+
+ ret = octep_vf_get_link_status(oct);
+ if (!ret)
+ octep_vf_set_link_status(oct, true);
+
+ /* Enable the input and output queues for this Octeon device */
+ oct->hw_ops.enable_io_queues(oct);
+
+ /* Enable Octeon device interrupts */
+ oct->hw_ops.enable_interrupts(oct);
+
+ octep_vf_oq_dbell_init(oct);
+
+ ret = octep_vf_get_link_status(oct);
+ if (ret)
+ octep_vf_link_up(netdev);
+
+ return 0;
+
+set_queues_err:
+ octep_vf_free_oqs(oct);
+setup_oq_err:
+ octep_vf_free_iqs(oct);
+setup_iq_err:
+ return -1;
+}
+
+/**
+ * octep_vf_stop() - stop the octeon network device.
+ *
+ * @netdev: pointer to kernel network device.
+ *
+ * stop the device Tx/Rx operations, bring down the link and
+ * free up all resources allocated for Tx/Rx queues and interrupts.
+ */
+static int octep_vf_stop(struct net_device *netdev)
+{
+ struct octep_vf_device *oct = netdev_priv(netdev);
+
+ netdev_info(netdev, "Stopping the device ...\n");
+
+ /* Stop Tx from stack */
+ netif_tx_stop_all_queues(netdev);
+ netif_carrier_off(netdev);
+ netif_tx_disable(netdev);
+
+ octep_vf_set_link_status(oct, false);
+ octep_vf_set_rx_state(oct, false);
+
+ oct->link_info.admin_up = 0;
+ oct->link_info.oper_up = 0;
+
+ oct->hw_ops.disable_interrupts(oct);
+
+ octep_vf_clean_iqs(oct);
+
+ oct->hw_ops.disable_io_queues(oct);
+ oct->hw_ops.reset_io_queues(oct);
+ octep_vf_free_oqs(oct);
+ octep_vf_free_iqs(oct);
+ netdev_info(netdev, "Device stopped !!\n");
+ return 0;
+}
+
+/**
+ * octep_vf_start_xmit() - Enqueue packet to Octoen hardware Tx Queue.
+ *
+ * @skb: packet skbuff pointer.
+ * @netdev: kernel network device.
+ *
+ * Return: NETDEV_TX_BUSY, if Tx Queue is full.
+ * NETDEV_TX_OK, if successfully enqueued to hardware Tx queue.
+ */
+static netdev_tx_t octep_vf_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ return NETDEV_TX_OK;
+}
+
+/**
+ * octep_vf_tx_timeout_task - work queue task to Handle Tx queue timeout.
+ *
+ * @work: pointer to Tx queue timeout work_struct
+ *
+ * Stop and start the device so that it frees up all queue resources
+ * and restarts the queues, that potentially clears a Tx queue timeout
+ * condition.
+ **/
+static void octep_vf_tx_timeout_task(struct work_struct *work)
+{
+ struct octep_vf_device *oct = container_of(work, struct octep_vf_device,
+ tx_timeout_task);
+ struct net_device *netdev = oct->netdev;
+
+ rtnl_lock();
+ if (netif_running(netdev)) {
+ octep_vf_stop(netdev);
+ octep_vf_open(netdev);
+ }
+ rtnl_unlock();
+}
+
+/**
+ * octep_vf_tx_timeout() - Handle Tx Queue timeout.
+ *
+ * @netdev: pointer to kernel network device.
+ * @txqueue: Timed out Tx queue number.
+ *
+ * Schedule a work to handle Tx queue timeout.
+ */
+static void octep_vf_tx_timeout(struct net_device *netdev, unsigned int txqueue)
+{
+ struct octep_vf_device *oct = netdev_priv(netdev);
+
+ queue_work(octep_vf_wq, &oct->tx_timeout_task);
+}
+
+static const struct net_device_ops octep_vf_netdev_ops = {
+ .ndo_open = octep_vf_open,
+ .ndo_stop = octep_vf_stop,
+ .ndo_start_xmit = octep_vf_start_xmit,
+ .ndo_tx_timeout = octep_vf_tx_timeout,
+};
+
+static const char *octep_vf_devid_to_str(struct octep_vf_device *oct)
+{
+ switch (oct->chip_id) {
+ case OCTEP_PCI_DEVICE_ID_CN93_VF:
+ return "CN93XX";
+ case OCTEP_PCI_DEVICE_ID_CNF95N_VF:
+ return "CNF95N";
+ default:
+ return "Unsupported";
+ }
+}
+
+/**
+ * octep_vf_device_setup() - Setup Octeon Device.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * Setup Octeon device hardware operations, configuration, etc ...
+ */
+int octep_vf_device_setup(struct octep_vf_device *oct)
+{
+ struct pci_dev *pdev = oct->pdev;
+
+ /* allocate memory for oct->conf */
+ oct->conf = kzalloc(sizeof(*oct->conf), GFP_KERNEL);
+ if (!oct->conf)
+ return -ENOMEM;
+
+ /* Map BAR region 0 */
+ oct->mmio.hw_addr = ioremap(pci_resource_start(oct->pdev, 0),
+ pci_resource_len(oct->pdev, 0));
+ oct->mmio.mapped = 1;
+
+ oct->chip_id = pdev->device;
+ oct->rev_id = pdev->revision;
+ dev_info(&pdev->dev, "chip_id = 0x%x\n", pdev->device);
+
+ switch (oct->chip_id) {
+ case OCTEP_PCI_DEVICE_ID_CN93_VF:
+ case OCTEP_PCI_DEVICE_ID_CNF95N_VF:
+ dev_info(&pdev->dev, "Setting up OCTEON %s PF PASS%d.%d\n",
+ octep_vf_devid_to_str(oct), OCTEP_VF_MAJOR_REV(oct),
+ OCTEP_VF_MINOR_REV(oct));
+ octep_vf_device_setup_cn93(oct);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported device\n");
+ goto unsupported_dev;
+ }
+
+ oct->pkind = CFG_GET_IQ_PKIND(oct->conf);
+
+ return 0;
+
+unsupported_dev:
+ iounmap(oct->mmio.hw_addr);
+ kfree(oct->conf);
+ return -EOPNOTSUPP;
+}
+
+/**
+ * octep_vf_device_cleanup() - Cleanup Octeon Device.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * Cleanup Octeon device allocated resources.
+ */
+static void octep_vf_device_cleanup(struct octep_vf_device *oct)
+{
+ dev_info(&oct->pdev->dev, "Cleaning up Octeon Device ...\n");
+
+ if (oct->mmio.mapped)
+ iounmap(oct->mmio.hw_addr);
+
+ kfree(oct->conf);
+ oct->conf = NULL;
+}
+
+static int octep_vf_get_mac_addr(struct octep_vf_device *oct, u8 *addr)
+{
+ return octep_vf_mbox_get_mac_addr(oct, addr);
+}
+
+/**
+ * octep_vf_probe() - Octeon PCI device probe handler.
+ *
+ * @pdev: PCI device structure.
+ * @ent: entry in Octeon PCI device ID table.
+ *
+ * Initializes and enables the Octeon PCI device for network operations.
+ * Initializes Octeon private data structure and registers a network device.
+ */
+static int octep_vf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct octep_vf_device *octep_vf_dev;
+ struct net_device *netdev;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to enable PCI device\n");
+ return err;
+ }
+
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (err) {
+ dev_err(&pdev->dev, "Failed to set DMA mask !!\n");
+ goto err_dma_mask;
+ }
+
+ err = pci_request_mem_regions(pdev, OCTEP_VF_DRV_NAME);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to map PCI memory regions\n");
+ goto err_pci_regions;
+ }
+
+ pci_enable_pcie_error_reporting(pdev);
+ pci_set_master(pdev);
+
+ netdev = alloc_etherdev_mq(sizeof(struct octep_vf_device),
+ OCTEP_VF_MAX_QUEUES);
+ if (!netdev) {
+ dev_err(&pdev->dev, "Failed to allocate netdev\n");
+ err = -ENOMEM;
+ goto err_alloc_netdev;
+ }
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ octep_vf_dev = netdev_priv(netdev);
+ octep_vf_dev->netdev = netdev;
+ octep_vf_dev->pdev = pdev;
+ octep_vf_dev->dev = &pdev->dev;
+ pci_set_drvdata(pdev, octep_vf_dev);
+
+ err = octep_vf_device_setup(octep_vf_dev);
+ if (err) {
+ dev_err(&pdev->dev, "Device setup failed\n");
+ goto err_octep_vf_config;
+ }
+ INIT_WORK(&octep_vf_dev->tx_timeout_task, octep_vf_tx_timeout_task);
+
+ netdev->netdev_ops = &octep_vf_netdev_ops;
+ netif_carrier_off(netdev);
+
+ netdev->hw_features = NETIF_F_SG;
+ netdev->features |= netdev->hw_features;
+ netdev->min_mtu = OCTEP_VF_MIN_MTU;
+ netdev->max_mtu = OCTEP_VF_MAX_MTU;
+ netdev->mtu = OCTEP_VF_DEFAULT_MTU;
+
+ if (octep_vf_setup_mbox(octep_vf_dev)) {
+ dev_err(&pdev->dev, "VF Mailbox setup failed\n");
+ err = -ENOMEM;
+ goto err_setup_mbox;
+ }
+
+ if (octep_vf_mbox_version_check(octep_vf_dev)) {
+ dev_err(&pdev->dev, "PF VF Mailbox version mismatch\n");
+ err = -EINVAL;
+ goto err_mbox_version;
+ }
+
+ octep_vf_get_mac_addr(octep_vf_dev, octep_vf_dev->mac_addr);
+ eth_hw_addr_set(netdev, octep_vf_dev->mac_addr);
+ err = register_netdev(netdev);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to register netdev\n");
+ goto err_register_dev;
+ }
+ dev_info(&pdev->dev, "Device probe successful\n");
+ return 0;
+
+err_register_dev:
+err_mbox_version:
+ octep_vf_delete_mbox(octep_vf_dev);
+err_setup_mbox:
+ octep_vf_device_cleanup(octep_vf_dev);
+err_octep_vf_config:
+ free_netdev(netdev);
+err_alloc_netdev:
+ pci_disable_pcie_error_reporting(pdev);
+ pci_release_mem_regions(pdev);
+err_pci_regions:
+err_dma_mask:
+ pci_disable_device(pdev);
+ dev_err(&pdev->dev, "Device probe failed\n");
+ return err;
+}
+
+/**
+ * octep_vf_remove() - Remove Octeon PCI device from driver control.
+ *
+ * @pdev: PCI device structure of the Octeon device.
+ *
+ * Cleanup all resources allocated for the Octeon device.
+ * Unregister from network device and disable the PCI device.
+ */
+static void octep_vf_remove(struct pci_dev *pdev)
+{
+ struct octep_vf_device *oct = pci_get_drvdata(pdev);
+ struct net_device *netdev;
+
+ if (!oct)
+ return;
+
+ cancel_work_sync(&oct->tx_timeout_task);
+ netdev = oct->netdev;
+ if (netdev->reg_state == NETREG_REGISTERED)
+ unregister_netdev(netdev);
+ octep_vf_delete_mbox(oct);
+ octep_vf_device_cleanup(oct);
+ pci_release_mem_regions(pdev);
+ free_netdev(netdev);
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+}
+
+static struct pci_driver octep_vf_driver = {
+ .name = OCTEP_VF_DRV_NAME,
+ .id_table = octep_vf_pci_id_tbl,
+ .probe = octep_vf_probe,
+ .remove = octep_vf_remove,
+};
+
+/**
+ * octep_vf_init_module() - Module initialization.
+ *
+ * create common resource for the driver and register PCI driver.
+ */
+static int __init octep_vf_init_module(void)
+{
+ int ret;
+
+ pr_info("%s: Loading %s ...\n", OCTEP_VF_DRV_NAME, OCTEP_VF_DRV_STRING);
+
+ /* work queue for all deferred tasks */
+ octep_vf_wq = create_singlethread_workqueue(OCTEP_VF_DRV_NAME);
+ if (!octep_vf_wq) {
+ pr_err("%s: Failed to create common workqueue\n",
+ OCTEP_VF_DRV_NAME);
+ return -ENOMEM;
+ }
+
+ ret = pci_register_driver(&octep_vf_driver);
+ if (ret < 0) {
+ pr_err("%s: Failed to register PCI driver; err=%d\n",
+ OCTEP_VF_DRV_NAME, ret);
+ return ret;
+ }
+
+ pr_info("%s: Loaded successfully !\n", OCTEP_VF_DRV_NAME);
+
+ return ret;
+}
+
+/**
+ * octep_vf_exit_module() - Module exit routine.
+ *
+ * unregister the driver with PCI subsystem and cleanup common resources.
+ */
+static void __exit octep_vf_exit_module(void)
+{
+ pr_info("%s: Unloading ...\n", OCTEP_VF_DRV_NAME);
+
+ pci_unregister_driver(&octep_vf_driver);
+ destroy_workqueue(octep_vf_wq);
+
+ pr_info("%s: Unloading complete\n", OCTEP_VF_DRV_NAME);
+}
+
+module_init(octep_vf_init_module);
+module_exit(octep_vf_exit_module);
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.h b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.h
new file mode 100644
index 000000000000..53e34c1a3b7b
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.h
@@ -0,0 +1,303 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#ifndef _OCTEP_VF_MAIN_H_
+#define _OCTEP_VF_MAIN_H_
+
+#include "octep_vf_tx.h"
+#include "octep_vf_rx.h"
+#include "octep_vf_mbox.h"
+
+#define OCTEP_VF_DRV_NAME "octeon_ep_vf"
+#define OCTEP_VF_DRV_STRING "Marvell Octeon EndPoint NIC VF Driver"
+
+#define OCTEP_PCI_DEVICE_ID_CN93_VF 0xB203 //93xx VF
+#define OCTEP_PCI_DEVICE_ID_CNF95N_VF 0xB403 //95N VF
+
+#define OCTEP_VF_MAX_QUEUES 63
+#define OCTEP_VF_MAX_IQ OCTEP_VF_MAX_QUEUES
+#define OCTEP_VF_MAX_OQ OCTEP_VF_MAX_QUEUES
+
+#define OCTEP_VF_MAX_MSIX_VECTORS OCTEP_VF_MAX_OQ
+
+#define OCTEP_VF_IQ_INTR_RESEND_BIT 59
+#define OCTEP_VF_OQ_INTR_RESEND_BIT 59
+
+/* PCI address space mapping information.
+ * Each of the 3 address spaces given by BAR0, BAR2 and BAR4 of
+ * Octeon gets mapped to different physical address spaces in
+ * the kernel.
+ */
+struct octep_vf_mmio {
+ /* The physical address to which the PCI address space is mapped. */
+ u8 __iomem *hw_addr;
+
+ /* Flag indicating the mapping was successful. */
+ int mapped;
+};
+
+struct octep_vf_hw_ops {
+ void (*setup_iq_regs)(struct octep_vf_device *oct, int q);
+ void (*setup_oq_regs)(struct octep_vf_device *oct, int q);
+ void (*setup_mbox_regs)(struct octep_vf_device *oct, int mbox);
+
+ irqreturn_t (*non_ioq_intr_handler)(void *ioq_vector);
+ irqreturn_t (*ioq_intr_handler)(void *ioq_vector);
+ void (*reinit_regs)(struct octep_vf_device *oct);
+ u32 (*update_iq_read_idx)(struct octep_vf_iq *iq);
+
+ void (*enable_interrupts)(struct octep_vf_device *oct);
+ void (*disable_interrupts)(struct octep_vf_device *oct);
+
+ void (*enable_io_queues)(struct octep_vf_device *oct);
+ void (*disable_io_queues)(struct octep_vf_device *oct);
+ void (*enable_iq)(struct octep_vf_device *oct, int q);
+ void (*disable_iq)(struct octep_vf_device *oct, int q);
+ void (*enable_oq)(struct octep_vf_device *oct, int q);
+ void (*disable_oq)(struct octep_vf_device *oct, int q);
+ void (*reset_io_queues)(struct octep_vf_device *oct);
+ void (*dump_registers)(struct octep_vf_device *oct);
+};
+
+/* Octeon mailbox data */
+struct octep_vf_mbox_data {
+ /* Holds the offset of received data via mailbox. */
+ u32 data_index;
+
+ /* Holds the received data via mailbox. */
+ u8 recv_data[OCTEP_PFVF_MBOX_MAX_DATA_BUF_SIZE];
+};
+
+/* wrappers around work structs */
+struct octep_vf_mbox_wk {
+ struct work_struct work;
+ void *ctxptr;
+};
+
+/* Octeon device mailbox */
+struct octep_vf_mbox {
+ /* A spinlock to protect access to this q_mbox. */
+ spinlock_t lock;
+
+ u32 state;
+
+ /* SLI_MAC_PF_MBOX_INT for PF, SLI_PKT_MBOX_INT for VF. */
+ u8 __iomem *mbox_int_reg;
+
+ /* SLI_PKT_PF_VF_MBOX_SIG(0) for PF,
+ * SLI_PKT_PF_VF_MBOX_SIG(1) for VF.
+ */
+ u8 __iomem *mbox_write_reg;
+
+ /* SLI_PKT_PF_VF_MBOX_SIG(1) for PF,
+ * SLI_PKT_PF_VF_MBOX_SIG(0) for VF.
+ */
+ u8 __iomem *mbox_read_reg;
+
+ /* Octeon mailbox data */
+ struct octep_vf_mbox_data mbox_data;
+
+ /* Octeon mailbox work handler to process Mbox messages */
+ struct octep_vf_mbox_wk wk;
+};
+
+/* Tx/Rx queue vector per interrupt. */
+struct octep_vf_ioq_vector {
+ char name[OCTEP_VF_MSIX_NAME_SIZE];
+ struct napi_struct napi;
+ struct octep_vf_device *octep_vf_dev;
+ struct octep_vf_iq *iq;
+ struct octep_vf_oq *oq;
+ cpumask_t affinity_mask;
+};
+
+/* Octeon hardware/firmware offload capability flags. */
+#define OCTEP_VF_CAP_TX_CHECKSUM BIT(0)
+#define OCTEP_VF_CAP_RX_CHECKSUM BIT(1)
+#define OCTEP_VF_CAP_TSO BIT(2)
+
+/* Link modes */
+enum octep_vf_link_mode_bit_indices {
+ OCTEP_VF_LINK_MODE_10GBASE_T = 0,
+ OCTEP_VF_LINK_MODE_10GBASE_R,
+ OCTEP_VF_LINK_MODE_10GBASE_CR,
+ OCTEP_VF_LINK_MODE_10GBASE_KR,
+ OCTEP_VF_LINK_MODE_10GBASE_LR,
+ OCTEP_VF_LINK_MODE_10GBASE_SR,
+ OCTEP_VF_LINK_MODE_25GBASE_CR,
+ OCTEP_VF_LINK_MODE_25GBASE_KR,
+ OCTEP_VF_LINK_MODE_25GBASE_SR,
+ OCTEP_VF_LINK_MODE_40GBASE_CR4,
+ OCTEP_VF_LINK_MODE_40GBASE_KR4,
+ OCTEP_VF_LINK_MODE_40GBASE_LR4,
+ OCTEP_VF_LINK_MODE_40GBASE_SR4,
+ OCTEP_VF_LINK_MODE_50GBASE_CR2,
+ OCTEP_VF_LINK_MODE_50GBASE_KR2,
+ OCTEP_VF_LINK_MODE_50GBASE_SR2,
+ OCTEP_VF_LINK_MODE_50GBASE_CR,
+ OCTEP_VF_LINK_MODE_50GBASE_KR,
+ OCTEP_VF_LINK_MODE_50GBASE_LR,
+ OCTEP_VF_LINK_MODE_50GBASE_SR,
+ OCTEP_VF_LINK_MODE_100GBASE_CR4,
+ OCTEP_VF_LINK_MODE_100GBASE_KR4,
+ OCTEP_VF_LINK_MODE_100GBASE_LR4,
+ OCTEP_VF_LINK_MODE_100GBASE_SR4,
+ OCTEP_VF_LINK_MODE_NBITS
+};
+
+/* Hardware interface link state information. */
+struct octep_vf_iface_link_info {
+ /* Bitmap of Supported link speeds/modes. */
+ u64 supported_modes;
+
+ /* Bitmap of Advertised link speeds/modes. */
+ u64 advertised_modes;
+
+ /* Negotiated link speed in Mbps. */
+ u32 speed;
+
+ /* MTU */
+ u16 mtu;
+
+ /* Autonegotiation state. */
+#define OCTEP_VF_LINK_MODE_AUTONEG_SUPPORTED BIT(0)
+#define OCTEP_VF_LINK_MODE_AUTONEG_ADVERTISED BIT(1)
+ u8 autoneg;
+
+ /* Pause frames setting. */
+#define OCTEP_VF_LINK_MODE_PAUSE_SUPPORTED BIT(0)
+#define OCTEP_VF_LINK_MODE_PAUSE_ADVERTISED BIT(1)
+ u8 pause;
+
+ /* Admin state of the link (ifconfig <iface> up/down */
+ u8 admin_up;
+
+ /* Operational state of the link: physical link is up down */
+ u8 oper_up;
+};
+
+/* Hardware interface stats information. */
+struct octep_vf_iface_rxtx_stats {
+ /* Hardware Interface Rx statistics */
+ struct octep_vf_iface_rx_stats iface_rx_stats;
+
+ /* Hardware Interface Tx statistics */
+ struct octep_vf_iface_tx_stats iface_tx_stats;
+};
+
+/* The Octeon device specific private data structure.
+ * Each Octeon device has this structure to represent all its components.
+ */
+struct octep_vf_device {
+ struct octep_vf_config *conf;
+
+ /* Octeon Chip type. */
+ u16 chip_id;
+ u16 rev_id;
+
+ /* Device capabilities enabled */
+ u64 caps_enabled;
+ /* Device capabilities supported */
+ u64 caps_supported;
+
+ /* Pointer to basic Linux device */
+ struct device *dev;
+ /* Linux PCI device pointer */
+ struct pci_dev *pdev;
+ /* Netdev corresponding to the Octeon device */
+ struct net_device *netdev;
+
+ /* memory mapped io range */
+ struct octep_vf_mmio mmio;
+
+ /* MAC address */
+ u8 mac_addr[ETH_ALEN];
+
+ /* Tx queues (IQ: Instruction Queue) */
+ u16 num_iqs;
+ /* pkind value to be used in every Tx hardware descriptor */
+ u8 pkind;
+ /* Pointers to Octeon Tx queues */
+ struct octep_vf_iq *iq[OCTEP_VF_MAX_IQ];
+
+ /* Rx queues (OQ: Output Queue) */
+ u16 num_oqs;
+ /* Pointers to Octeon Rx queues */
+ struct octep_vf_oq *oq[OCTEP_VF_MAX_OQ];
+
+ /* Hardware port number of the PCIe interface */
+ u16 pcie_port;
+
+ /* Hardware operations */
+ struct octep_vf_hw_ops hw_ops;
+
+ /* IRQ info */
+ u16 num_irqs;
+ u16 num_non_ioq_irqs;
+ char *non_ioq_irq_names;
+ struct msix_entry *msix_entries;
+ /* IOq information of it's corresponding MSI-X interrupt. */
+ struct octep_vf_ioq_vector *ioq_vector[OCTEP_VF_MAX_QUEUES];
+
+ /* Hardware Interface Tx statistics */
+ struct octep_vf_iface_tx_stats iface_tx_stats;
+ /* Hardware Interface Rx statistics */
+ struct octep_vf_iface_rx_stats iface_rx_stats;
+
+ /* Hardware Interface Link info like supported modes, aneg support */
+ struct octep_vf_iface_link_info link_info;
+
+ /* Mailbox to talk to VFs */
+ struct octep_vf_mbox *mbox;
+
+ /* Work entry to handle Tx timeout */
+ struct work_struct tx_timeout_task;
+
+ /* offset for iface stats */
+ u32 ctrl_mbox_ifstats_offset;
+};
+
+static inline u16 OCTEP_VF_MAJOR_REV(struct octep_vf_device *oct)
+{
+ u16 rev = (oct->rev_id & 0xC) >> 2;
+
+ return (rev == 0) ? 1 : rev;
+}
+
+static inline u16 OCTEP_VF_MINOR_REV(struct octep_vf_device *oct)
+{
+ return (oct->rev_id & 0x3);
+}
+
+/* Octeon CSR read/write access APIs */
+#define octep_vf_write_csr(octep_vf_dev, reg_off, value) \
+ writel(value, (octep_vf_dev)->mmio.hw_addr + (reg_off))
+
+#define octep_vf_write_csr64(octep_vf_dev, reg_off, val64) \
+ writeq(val64, (octep_vf_dev)->mmio.hw_addr + (reg_off))
+
+#define octep_vf_read_csr(octep_vf_dev, reg_off) \
+ readl((octep_vf_dev)->mmio.hw_addr + (reg_off))
+
+#define octep_vf_read_csr64(octep_vf_dev, reg_off) \
+ readq((octep_vf_dev)->mmio.hw_addr + (reg_off))
+
+extern struct workqueue_struct *octep_vf_wq;
+
+int octep_vf_device_setup(struct octep_vf_device *oct);
+int octep_vf_setup_iqs(struct octep_vf_device *oct);
+void octep_vf_free_iqs(struct octep_vf_device *oct);
+void octep_vf_clean_iqs(struct octep_vf_device *oct);
+int octep_vf_setup_oqs(struct octep_vf_device *oct);
+void octep_vf_free_oqs(struct octep_vf_device *oct);
+void octep_vf_oq_dbell_init(struct octep_vf_device *oct);
+void octep_vf_device_setup_cn93(struct octep_vf_device *oct);
+int octep_vf_iq_process_completions(struct octep_vf_iq *iq, u16 budget);
+int octep_vf_oq_process_rx(struct octep_vf_oq *oq, int budget);
+int octep_vf_get_if_stats(struct octep_vf_device *oct);
+void octep_vf_mbox_work(struct work_struct *work);
+#endif /* _OCTEP_VF_MAIN_H_ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_mbox.c b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_mbox.c
new file mode 100644
index 000000000000..d44340fd9d56
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_mbox.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include "octep_vf_config.h"
+#include "octep_vf_main.h"
+
+int octep_vf_setup_mbox(struct octep_vf_device *oct)
+{
+ int ring = 0;
+
+ oct->mbox = vzalloc(sizeof(*oct->mbox));
+ if (!oct->mbox)
+ return -1;
+
+ spin_lock_init(&oct->mbox->lock);
+
+ oct->hw_ops.setup_mbox_regs(oct, ring);
+ INIT_WORK(&oct->mbox->wk.work, octep_vf_mbox_work);
+ oct->mbox->wk.ctxptr = oct;
+
+ dev_info(&oct->pdev->dev, "setup vf mbox successfully\n");
+ return 0;
+}
+
+void octep_vf_delete_mbox(struct octep_vf_device *oct)
+{
+ if (oct->mbox) {
+ if (work_pending(&oct->mbox->wk.work))
+ cancel_work_sync(&oct->mbox->wk.work);
+ vfree(oct->mbox);
+ oct->mbox = NULL;
+ dev_info(&oct->pdev->dev, "Deleted vf mbox successfully\n");
+ }
+}
+
+int octep_vf_mbox_version_check(struct octep_vf_device *oct)
+{
+ return 0;
+}
+
+void octep_vf_mbox_work(struct work_struct *work)
+{
+}
+
+int octep_vf_mbox_get_mac_addr(struct octep_vf_device *oct, char *mac_addr)
+{
+ return 0;
+}
+
+int octep_vf_mbox_set_rx_state(struct octep_vf_device *oct, bool state)
+{
+ return 0;
+}
+
+int octep_vf_mbox_set_link_status(struct octep_vf_device *oct, bool status)
+{
+ return 0;
+}
+
+int octep_vf_mbox_get_link_status(struct octep_vf_device *oct, u8 *oper_up)
+{
+ return 0;
+}
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_mbox.h b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_mbox.h
new file mode 100644
index 000000000000..f7a3c03a72e4
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_mbox.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+#ifndef _OCTEP_VF_MBOX_H_
+#define _OCTEP_VF_MBOX_H_
+
+#define OCTEP_PFVF_MBOX_MAX_DATA_BUF_SIZE 256
+
+int octep_vf_setup_mbox(struct octep_vf_device *oct);
+void octep_vf_delete_mbox(struct octep_vf_device *oct);
+int octep_vf_mbox_get_mac_addr(struct octep_vf_device *oct, char *mac_addr);
+int octep_vf_mbox_version_check(struct octep_vf_device *oct);
+int octep_vf_mbox_set_rx_state(struct octep_vf_device *oct, bool state);
+int octep_vf_mbox_set_link_status(struct octep_vf_device *oct, bool status);
+int octep_vf_mbox_get_link_status(struct octep_vf_device *oct, u8 *oper_up);
+#endif
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_regs_cn9k.h b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_regs_cn9k.h
new file mode 100644
index 000000000000..25e2a876ebba
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_regs_cn9k.h
@@ -0,0 +1,154 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+#ifndef _OCTEP_VF_REGS_CN9K_H_
+#define _OCTEP_VF_REGS_CN9K_H_
+
+/*############################ RST #########################*/
+#define CN93_VF_CONFIG_XPANSION_BAR 0x38
+#define CN93_VF_CONFIG_PCIE_CAP 0x70
+#define CN93_VF_CONFIG_PCIE_DEVCAP 0x74
+#define CN93_VF_CONFIG_PCIE_DEVCTL 0x78
+#define CN93_VF_CONFIG_PCIE_LINKCAP 0x7C
+#define CN93_VF_CONFIG_PCIE_LINKCTL 0x80
+#define CN93_VF_CONFIG_PCIE_SLOTCAP 0x84
+#define CN93_VF_CONFIG_PCIE_SLOTCTL 0x88
+
+#define CN93_VF_RING_OFFSET BIT_ULL(17)
+
+/*###################### RING IN REGISTERS #########################*/
+#define CN93_VF_SDP_R_IN_CONTROL_START 0x10000
+#define CN93_VF_SDP_R_IN_ENABLE_START 0x10010
+#define CN93_VF_SDP_R_IN_INSTR_BADDR_START 0x10020
+#define CN93_VF_SDP_R_IN_INSTR_RSIZE_START 0x10030
+#define CN93_VF_SDP_R_IN_INSTR_DBELL_START 0x10040
+#define CN93_VF_SDP_R_IN_CNTS_START 0x10050
+#define CN93_VF_SDP_R_IN_INT_LEVELS_START 0x10060
+#define CN93_VF_SDP_R_IN_PKT_CNT_START 0x10080
+#define CN93_VF_SDP_R_IN_BYTE_CNT_START 0x10090
+
+#define CN93_VF_SDP_R_IN_CONTROL(ring) \
+ (CN93_VF_SDP_R_IN_CONTROL_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_IN_ENABLE(ring) \
+ (CN93_VF_SDP_R_IN_ENABLE_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_IN_INSTR_BADDR(ring) \
+ (CN93_VF_SDP_R_IN_INSTR_BADDR_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_IN_INSTR_RSIZE(ring) \
+ (CN93_VF_SDP_R_IN_INSTR_RSIZE_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_IN_INSTR_DBELL(ring) \
+ (CN93_VF_SDP_R_IN_INSTR_DBELL_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_IN_CNTS(ring) \
+ (CN93_VF_SDP_R_IN_CNTS_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_IN_INT_LEVELS(ring) \
+ (CN93_VF_SDP_R_IN_INT_LEVELS_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_IN_PKT_CNT(ring) \
+ (CN93_VF_SDP_R_IN_PKT_CNT_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_IN_BYTE_CNT(ring) \
+ (CN93_VF_SDP_R_IN_BYTE_CNT_START + ((ring) * CN93_VF_RING_OFFSET))
+
+/*------------------ R_IN Masks ----------------*/
+
+/** Rings per Virtual Function **/
+#define CN93_VF_R_IN_CTL_RPVF_MASK (0xF)
+#define CN93_VF_R_IN_CTL_RPVF_POS (48)
+
+/* Number of instructions to be read in one MAC read request.
+ * setting to Max value(4)
+ **/
+#define CN93_VF_R_IN_CTL_IDLE BIT_ULL(28)
+#define CN93_VF_R_IN_CTL_RDSIZE (0x3ULL << 25)
+#define CN93_VF_R_IN_CTL_IS_64B BIT_ULL(24)
+#define CN93_VF_R_IN_CTL_D_NSR BIT_ULL(8)
+#define CN93_VF_R_IN_CTL_D_ESR BIT_ULL(6)
+#define CN93_VF_R_IN_CTL_D_ROR BIT_ULL(5)
+#define CN93_VF_R_IN_CTL_NSR BIT_ULL(3)
+#define CN93_VF_R_IN_CTL_ESR BIT_ULL(1)
+#define CN93_VF_R_IN_CTL_ROR BIT_ULL(0)
+
+#define CN93_VF_R_IN_CTL_MASK (CN93_VF_R_IN_CTL_RDSIZE | CN93_VF_R_IN_CTL_IS_64B)
+
+/*###################### RING OUT REGISTERS #########################*/
+#define CN93_VF_SDP_R_OUT_CNTS_START 0x10100
+#define CN93_VF_SDP_R_OUT_INT_LEVELS_START 0x10110
+#define CN93_VF_SDP_R_OUT_SLIST_BADDR_START 0x10120
+#define CN93_VF_SDP_R_OUT_SLIST_RSIZE_START 0x10130
+#define CN93_VF_SDP_R_OUT_SLIST_DBELL_START 0x10140
+#define CN93_VF_SDP_R_OUT_CONTROL_START 0x10150
+#define CN93_VF_SDP_R_OUT_ENABLE_START 0x10160
+#define CN93_VF_SDP_R_OUT_PKT_CNT_START 0x10180
+#define CN93_VF_SDP_R_OUT_BYTE_CNT_START 0x10190
+
+#define CN93_VF_SDP_R_OUT_CONTROL(ring) \
+ (CN93_VF_SDP_R_OUT_CONTROL_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_OUT_ENABLE(ring) \
+ (CN93_VF_SDP_R_OUT_ENABLE_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_OUT_SLIST_BADDR(ring) \
+ (CN93_VF_SDP_R_OUT_SLIST_BADDR_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_OUT_SLIST_RSIZE(ring) \
+ (CN93_VF_SDP_R_OUT_SLIST_RSIZE_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_OUT_SLIST_DBELL(ring) \
+ (CN93_VF_SDP_R_OUT_SLIST_DBELL_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_OUT_CNTS(ring) \
+ (CN93_VF_SDP_R_OUT_CNTS_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_OUT_INT_LEVELS(ring) \
+ (CN93_VF_SDP_R_OUT_INT_LEVELS_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_OUT_PKT_CNT(ring) \
+ (CN93_VF_SDP_R_OUT_PKT_CNT_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_OUT_BYTE_CNT(ring) \
+ (CN93_VF_SDP_R_OUT_BYTE_CNT_START + ((ring) * CN93_VF_RING_OFFSET))
+
+/*------------------ R_OUT Masks ----------------*/
+#define CN93_VF_R_OUT_INT_LEVELS_BMODE BIT_ULL(63)
+#define CN93_VF_R_OUT_INT_LEVELS_TIMET (32)
+
+#define CN93_VF_R_OUT_CTL_IDLE BIT_ULL(40)
+#define CN93_VF_R_OUT_CTL_ES_I BIT_ULL(34)
+#define CN93_VF_R_OUT_CTL_NSR_I BIT_ULL(33)
+#define CN93_VF_R_OUT_CTL_ROR_I BIT_ULL(32)
+#define CN93_VF_R_OUT_CTL_ES_D BIT_ULL(30)
+#define CN93_VF_R_OUT_CTL_NSR_D BIT_ULL(29)
+#define CN93_VF_R_OUT_CTL_ROR_D BIT_ULL(28)
+#define CN93_VF_R_OUT_CTL_ES_P BIT_ULL(26)
+#define CN93_VF_R_OUT_CTL_NSR_P BIT_ULL(25)
+#define CN93_VF_R_OUT_CTL_ROR_P BIT_ULL(24)
+#define CN93_VF_R_OUT_CTL_IMODE BIT_ULL(23)
+
+/* ##################### Mail Box Registers ########################## */
+/* SDP PF to VF Mailbox Data Register */
+#define CN93_VF_SDP_R_MBOX_PF_VF_DATA_START 0x10210
+/* SDP Packet PF to VF Mailbox Interrupt Register */
+#define CN93_VF_SDP_R_MBOX_PF_VF_INT_START 0x10220
+/* SDP VF to PF Mailbox Data Register */
+#define CN93_VF_SDP_R_MBOX_VF_PF_DATA_START 0x10230
+
+#define CN93_VF_SDP_R_MBOX_PF_VF_INT_ENAB BIT_ULL(1)
+#define CN93_VF_SDP_R_MBOX_PF_VF_INT_STATUS BIT_ULL(0)
+
+#define CN93_VF_SDP_R_MBOX_PF_VF_DATA(ring) \
+ (CN93_VF_SDP_R_MBOX_PF_VF_DATA_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_MBOX_PF_VF_INT(ring) \
+ (CN93_VF_SDP_R_MBOX_PF_VF_INT_START + ((ring) * CN93_VF_RING_OFFSET))
+
+#define CN93_VF_SDP_R_MBOX_VF_PF_DATA(ring) \
+ (CN93_VF_SDP_R_MBOX_VF_PF_DATA_START + ((ring) * CN93_VF_RING_OFFSET))
+#endif /* _OCTEP_VF_REGS_CN9K_H_ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.c b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.c
new file mode 100644
index 000000000000..4f1a8157ce39
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+
+#include "octep_vf_config.h"
+#include "octep_vf_main.h"
+
+/**
+ * octep_vf_setup_oqs() - setup resources for all Rx queues.
+ *
+ * @oct: Octeon device private data structure.
+ */
+int octep_vf_setup_oqs(struct octep_vf_device *oct)
+{
+ return -1;
+}
+
+/**
+ * octep_vf_oq_dbell_init() - Initialize Rx queue doorbell.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * Write number of descriptors to Rx queue doorbell register.
+ */
+void octep_vf_oq_dbell_init(struct octep_vf_device *oct)
+{
+}
+
+/**
+ * octep_vf_free_oqs() - Free resources of all Rx queues.
+ *
+ * @oct: Octeon device private data structure.
+ */
+void octep_vf_free_oqs(struct octep_vf_device *oct)
+{
+}
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.h b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.h
new file mode 100644
index 000000000000..b0af0e02e477
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_rx.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#ifndef _OCTEP_VF_RX_H_
+#define _OCTEP_VF_RX_H_
+
+/* struct octep_vf_oq_desc_hw - Octeon Hardware OQ descriptor format.
+ *
+ * The descriptor ring is made of descriptors which have 2 64-bit values:
+ *
+ * @buffer_ptr: DMA address of the skb->data
+ * @info_ptr: DMA address of host memory, used to update pkt count by hw.
+ * This is currently unused to save pci writes.
+ */
+struct octep_vf_oq_desc_hw {
+ dma_addr_t buffer_ptr;
+ u64 info_ptr;
+};
+
+#define OCTEP_VF_OQ_DESC_SIZE (sizeof(struct octep_vf_oq_desc_hw))
+
+#define OCTEP_VF_CSUM_L4_VERIFIED 0x1
+#define OCTEP_VF_CSUM_IP_VERIFIED 0x2
+#define OCTEP_VF_CSUM_VERIFIED (OCTEP_VF_CSUM_L4_VERIFIED | OCTEP_VF_CSUM_IP_VERIFIED)
+
+/* Extended Response Header in packet data received from Hardware.
+ * Includes metadata like checksum status.
+ * this is valid only if hardware/firmware published support for this.
+ * This is at offset 0 of packet data (skb->data).
+ */
+struct octep_vf_oq_resp_hw_ext {
+ /* Reserved. */
+ u64 reserved:62;
+
+ /* checksum verified. */
+ u64 csum_verified:2;
+};
+
+#define OCTEP_VF_OQ_RESP_HW_EXT_SIZE (sizeof(struct octep_vf_oq_resp_hw_ext))
+
+/* Length of Rx packet DMA'ed by Octeon to Host.
+ * this is in bigendian; so need to be converted to cpu endian.
+ * Octeon writes this at the beginning of Rx buffer (skb->data).
+ */
+struct octep_vf_oq_resp_hw {
+ /* The Length of the packet. */
+ __be64 length;
+};
+
+#define OCTEP_VF_OQ_RESP_HW_SIZE (sizeof(struct octep_vf_oq_resp_hw))
+
+/* Pointer to data buffer.
+ * Driver keeps a pointer to the data buffer that it made available to
+ * the Octeon device. Since the descriptor ring keeps physical (bus)
+ * addresses, this field is required for the driver to keep track of
+ * the virtual address pointers. The fields are operated by
+ * OS-dependent routines.
+ */
+struct octep_vf_rx_buffer {
+ struct page *page;
+
+ /* length from rx hardware descriptor after converting to cpu endian */
+ u64 len;
+};
+
+#define OCTEP_VF_OQ_RECVBUF_SIZE (sizeof(struct octep_vf_rx_buffer))
+
+/* Output Queue statistics. Each output queue has four stats fields. */
+struct octep_vf_oq_stats {
+ /* Number of packets received from the Device. */
+ u64 packets;
+
+ /* Number of bytes received from the Device. */
+ u64 bytes;
+
+ /* Number of times failed to allocate buffers. */
+ u64 alloc_failures;
+};
+
+#define OCTEP_VF_OQ_STATS_SIZE (sizeof(struct octep_vf_oq_stats))
+
+/* Hardware interface Rx statistics */
+struct octep_vf_iface_rx_stats {
+ /* Received packets */
+ u64 pkts;
+
+ /* Octets of received packets */
+ u64 octets;
+
+ /* Received PAUSE and Control packets */
+ u64 pause_pkts;
+
+ /* Received PAUSE and Control octets */
+ u64 pause_octets;
+
+ /* Filtered DMAC0 packets */
+ u64 dmac0_pkts;
+
+ /* Filtered DMAC0 octets */
+ u64 dmac0_octets;
+
+ /* Packets dropped due to RX FIFO full */
+ u64 dropped_pkts_fifo_full;
+
+ /* Octets dropped due to RX FIFO full */
+ u64 dropped_octets_fifo_full;
+
+ /* Error packets */
+ u64 err_pkts;
+
+ /* Filtered DMAC1 packets */
+ u64 dmac1_pkts;
+
+ /* Filtered DMAC1 octets */
+ u64 dmac1_octets;
+
+ /* NCSI-bound packets dropped */
+ u64 ncsi_dropped_pkts;
+
+ /* NCSI-bound octets dropped */
+ u64 ncsi_dropped_octets;
+
+ /* Multicast packets received. */
+ u64 mcast_pkts;
+
+ /* Broadcast packets received. */
+ u64 bcast_pkts;
+
+};
+
+/* The Descriptor Ring Output Queue structure.
+ * This structure has all the information required to implement a
+ * Octeon OQ.
+ */
+struct octep_vf_oq {
+ u32 q_no;
+
+ struct octep_vf_device *octep_vf_dev;
+ struct net_device *netdev;
+ struct device *dev;
+
+ struct napi_struct *napi;
+
+ /* The receive buffer list. This list has the virtual addresses
+ * of the buffers.
+ */
+ struct octep_vf_rx_buffer *buff_info;
+
+ /* Pointer to the mapped packet credit register.
+ * Host writes number of info/buffer ptrs available to this register
+ */
+ u8 __iomem *pkts_credit_reg;
+
+ /* Pointer to the mapped packet sent register.
+ * Octeon writes the number of packets DMA'ed to host memory
+ * in this register.
+ */
+ u8 __iomem *pkts_sent_reg;
+
+ /* Statistics for this OQ. */
+ struct octep_vf_oq_stats stats;
+
+ /* Packets pending to be processed */
+ u32 pkts_pending;
+ u32 last_pkt_count;
+
+ /* Index in the ring where the driver should read the next packet */
+ u32 host_read_idx;
+
+ /* Number of descriptors in this ring. */
+ u32 max_count;
+ u32 ring_size_mask;
+
+ /* The number of descriptors pending refill. */
+ u32 refill_count;
+
+ /* Index in the ring where the driver will refill the
+ * descriptor's buffer
+ */
+ u32 host_refill_idx;
+ u32 refill_threshold;
+
+ /* The size of each buffer pointed by the buffer pointer. */
+ u32 buffer_size;
+ u32 max_single_buffer_size;
+
+ /* The 8B aligned descriptor ring starts at this address. */
+ struct octep_vf_oq_desc_hw *desc_ring;
+
+ /* DMA mapped address of the OQ descriptor ring. */
+ dma_addr_t desc_ring_dma;
+};
+
+#define OCTEP_VF_OQ_SIZE (sizeof(struct octep_vf_oq))
+#endif /* _OCTEP_VF_RX_H_ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_tx.c b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_tx.c
new file mode 100644
index 000000000000..232ba479ecf6
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_tx.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+
+#include "octep_vf_config.h"
+#include "octep_vf_main.h"
+
+/**
+ * octep_vf_clean_iqs() - Clean Tx queues to shutdown the device.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * Free the buffers in Tx queue descriptors pending completion and
+ * reset queue indices
+ */
+void octep_vf_clean_iqs(struct octep_vf_device *oct)
+{
+}
+
+/**
+ * octep_vf_setup_iqs() - setup resources for all Tx queues.
+ *
+ * @oct: Octeon device private data structure.
+ */
+int octep_vf_setup_iqs(struct octep_vf_device *oct)
+{
+ return -1;
+}
+
+/**
+ * octep_vf_free_iqs() - Free resources of all Tx queues.
+ *
+ * @oct: Octeon device private data structure.
+ */
+void octep_vf_free_iqs(struct octep_vf_device *oct)
+{
+}
diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_tx.h b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_tx.h
new file mode 100644
index 000000000000..06b1cf159605
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_tx.h
@@ -0,0 +1,242 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) VF Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#ifndef _OCTEP_VF_TX_H_
+#define _OCTEP_VF_TX_H_
+
+#define IQ_SEND_OK 0
+#define IQ_SEND_STOP 1
+#define IQ_SEND_FAILED -1
+
+#define TX_BUFTYPE_NONE 0
+#define TX_BUFTYPE_NET 1
+#define TX_BUFTYPE_NET_SG 2
+#define NUM_TX_BUFTYPES 3
+
+/* Hardware format for Scatter/Gather list */
+struct octep_vf_tx_sglist_desc {
+ u16 len[4];
+ dma_addr_t dma_ptr[4];
+};
+
+/* Each Scatter/Gather entry sent to hardwar hold four pointers.
+ * So, number of entries required is (MAX_SKB_FRAGS + 1)/4, where '+1'
+ * is for main skb which also goes as a gather buffer to Octeon hardware.
+ * To allocate sufficient SGLIST entries for a packet with max fragments,
+ * align by adding 3 before calcuating max SGLIST entries per packet.
+ */
+#define OCTEP_VF_SGLIST_ENTRIES_PER_PKT ((MAX_SKB_FRAGS + 1 + 3) / 4)
+#define OCTEP_VF_SGLIST_SIZE_PER_PKT \
+ (OCTEP_VF_SGLIST_ENTRIES_PER_PKT * sizeof(struct octep_vf_tx_sglist_desc))
+
+struct octep_vf_tx_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ struct octep_vf_tx_sglist_desc *sglist;
+ dma_addr_t sglist_dma;
+ u8 gather;
+};
+
+#define OCTEP_VF_IQ_TXBUFF_INFO_SIZE (sizeof(struct octep_vf_tx_buffer))
+
+/* VF Hardware interface Tx statistics */
+struct octep_vf_iface_tx_stats {
+ /* Total frames sent on the interface */
+ u64 pkts;
+
+ /* Total octets sent on the interface */
+ u64 octs;
+
+ /* Packets sent to a broadcast DMAC */
+ u64 bcst;
+
+ /* Packets sent to the multicast DMAC */
+ u64 mcst;
+
+ /* Packets dropped */
+ u64 dropped;
+
+ /* Reserved */
+ u64 reserved[13];
+};
+
+/* VF Input Queue statistics */
+struct octep_vf_iq_stats {
+ /* Instructions posted to this queue. */
+ u64 instr_posted;
+
+ /* Instructions copied by hardware for processing. */
+ u64 instr_completed;
+
+ /* Instructions that could not be processed. */
+ u64 instr_dropped;
+
+ /* Bytes sent through this queue. */
+ u64 bytes_sent;
+
+ /* Gather entries sent through this queue. */
+ u64 sgentry_sent;
+
+ /* Number of transmit failures due to TX_BUSY */
+ u64 tx_busy;
+
+ /* Number of times the queue is restarted */
+ u64 restart_cnt;
+};
+
+/* The instruction (input) queue.
+ * The input queue is used to post raw (instruction) mode data or packet
+ * data to Octeon device from the host. Each input queue (up to 4) for
+ * a Octeon device has one such structure to represent it.
+ */
+struct octep_vf_iq {
+ u32 q_no;
+
+ struct octep_vf_device *octep_vf_dev;
+ struct net_device *netdev;
+ struct device *dev;
+ struct netdev_queue *netdev_q;
+
+ /* Index in input ring where driver should write the next packet */
+ u16 host_write_index;
+
+ /* Index in input ring where Octeon is expected to read next packet */
+ u16 octep_vf_read_index;
+
+ /* This index aids in finding the window in the queue where Octeon
+ * has read the commands.
+ */
+ u16 flush_index;
+
+ /* Statistics for this input queue. */
+ struct octep_vf_iq_stats stats;
+
+ /* This field keeps track of the instructions pending in this queue. */
+ atomic_t instr_pending;
+
+ /* Pointer to the Virtual Base addr of the input ring. */
+ struct octep_vf_tx_desc_hw *desc_ring;
+
+ /* DMA mapped base address of the input descriptor ring. */
+ dma_addr_t desc_ring_dma;
+
+ /* Info of Tx buffers pending completion. */
+ struct octep_vf_tx_buffer *buff_info;
+
+ /* Base pointer to Scatter/Gather lists for all ring descriptors. */
+ struct octep_vf_tx_sglist_desc *sglist;
+
+ /* DMA mapped addr of Scatter Gather Lists */
+ dma_addr_t sglist_dma;
+
+ /* Octeon doorbell register for the ring. */
+ u8 __iomem *doorbell_reg;
+
+ /* Octeon instruction count register for this ring. */
+ u8 __iomem *inst_cnt_reg;
+
+ /* interrupt level register for this ring */
+ u8 __iomem *intr_lvl_reg;
+
+ /* Maximum no. of instructions in this queue. */
+ u32 max_count;
+ u32 ring_size_mask;
+
+ u32 pkt_in_done;
+ u32 pkts_processed;
+
+ u32 status;
+
+ /* Number of instructions pending to be posted to Octeon. */
+ u32 fill_cnt;
+
+ /* The max. number of instructions that can be held pending by the
+ * driver before ringing doorbell.
+ */
+ u32 fill_threshold;
+};
+
+/* Hardware Tx Instruction Header */
+struct octep_vf_instr_hdr {
+ /* Data Len */
+ u64 tlen:16;
+
+ /* Reserved */
+ u64 rsvd:20;
+
+ /* PKIND for SDP */
+ u64 pkind:6;
+
+ /* Front Data size */
+ u64 fsz:6;
+
+ /* No. of entries in gather list */
+ u64 gsz:14;
+
+ /* Gather indicator 1=gather*/
+ u64 gather:1;
+
+ /* Reserved3 */
+ u64 reserved3:1;
+};
+
+/* Hardware Tx completion response header */
+struct octep_vf_instr_resp_hdr {
+ /* Request ID */
+ u64 rid:16;
+
+ /* PCIe port to use for response */
+ u64 pcie_port:3;
+
+ /* Scatter indicator 1=scatter */
+ u64 scatter:1;
+
+ /* Size of Expected result OR no. of entries in scatter list */
+ u64 rlenssz:14;
+
+ /* Desired destination port for result */
+ u64 dport:6;
+
+ /* Opcode Specific parameters */
+ u64 param:8;
+
+ /* Opcode for the return packet */
+ u64 opcode:16;
+};
+
+/* 64-byte Tx instruction format.
+ * Format of instruction for a 64-byte mode input queue.
+ *
+ * only first 16-bytes (dptr and ih) are mandatory; rest are optional
+ * and filled by the driver based on firmware/hardware capabilities.
+ * These optional headers together called Front Data and its size is
+ * described by ih->fsz.
+ */
+struct octep_vf_tx_desc_hw {
+ /* Pointer where the input data is available. */
+ u64 dptr;
+
+ /* Instruction Header. */
+ union {
+ struct octep_vf_instr_hdr ih;
+ u64 ih64;
+ };
+
+ /* Pointer where the response for a RAW mode packet will be written
+ * by Octeon.
+ */
+ u64 rptr;
+
+ /* Input Instruction Response Header. */
+ struct octep_vf_instr_resp_hdr irh;
+
+ /* Additional headers available in a 64-byte instruction. */
+ u64 exhdr[4];
+};
+
+#define OCTEP_VF_IQ_DESC_SIZE (sizeof(struct octep_vf_tx_desc_hw))
+#endif /* _OCTEP_VF_TX_H_ */
--
2.36.0
Powered by blists - more mailing lists