Message-ID: <CAJnrk1YnPhHrDmoNoVe5aMoDQq3No=nHKW5P9-nXpN_d8rexjw@mail.gmail.com>
Date:   Tue, 8 Nov 2022 14:02:11 -0800
From:   Joanne Koong <joannelkoong@...il.com>
To:     Kuniyuki Iwashima <kuniyu@...zon.com>
Cc:     davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        kuni1840@...il.com, martin.lau@...nel.org,
        mathew.j.martineau@...ux.intel.com, netdev@...r.kernel.org,
        pabeni@...hat.com
Subject: Re: [RFC] bhash2 and WARN_ON() for inconsistent sk saddr.

On Tue, Nov 8, 2022 at 11:50 AM Kuniyuki Iwashima <kuniyu@...zon.com> wrote:
>
> From:   Joanne Koong <joannelkoong@...il.com>
> Date:   Tue, 8 Nov 2022 09:40:22 -0800
> >  On Mon, Nov 7, 2022 at 5:27 PM Kuniyuki Iwashima <kuniyu@...zon.com> wrote:
> > >
> > > From:   Joanne Koong <joannelkoong@...il.com>
> > > Date:   Mon, 7 Nov 2022 14:20:46 -0800
> > > > On Fri, Oct 28, 2022 at 5:13 PM Kuniyuki Iwashima <kuniyu@...zon.com> wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > I want to discuss bhash2 and WARN_ON() being fired every day this month
> > > > > on my syzkaller instance without repro.
> > > > >
> > > > >   WARNING: CPU: 0 PID: 209 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1))
> > > > >   ...
> > > > >   inet_csk_listen_start (net/ipv4/inet_connection_sock.c:1205)
> > > > >   inet_listen (net/ipv4/af_inet.c:228)
> > > > >   __sys_listen (net/socket.c:1810)
> > > > >   __x64_sys_listen (net/socket.c:1819 net/socket.c:1817 net/socket.c:1817)
> > > > >   do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
> > > > >   entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
> > > > >
> > > > [...]
> > > > >
> > > > > Please see the source addresses of s2/s3 below after connect() fails.
> > > > > The s2 case is another variant of the first syzbot report, which has
> > > > > been already _fixed_.  And the s3 case is a repro for the issue that
> > > > > Mat and I saw.
> > > >
> > > > Since the s2 address mismatch case is addressed by your patch
> > > > https://lore.kernel.org/netdev/20221103172419.20977-1-kuniyu@amazon.com/,
> > > > I will focus my comments here on the s3 case.
> > > >
> > > > >
> > > > >   # sysctl -w net.ipv4.tcp_syn_retries=1
> > > > >   net.ipv4.tcp_syn_retries = 1
> > > > >   # python3
> > > > >   >>> from socket import *
> > > > >   >>>
> > > > >   >>> s1 = socket()
> > > > >   >>> s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
> > > > >   >>> s1.bind(('0.0.0.0', 10000))
> > > > >   >>> s1.connect(('127.0.0.1', 10000))
> > > > >   >>>
> > > > >   >>> s2 = socket()
> > > > >   >>> s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
> > > > >   >>> s2.bind(('0.0.0.0', 10000))
> > > > >   >>> s2
> > > > >   <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 10000)>
> > > > >   >>>
> > > > >   >>> s2.connect(('127.0.0.1', 10000))
> > > > >   Traceback (most recent call last):
> > > > >     File "<stdin>", line 1, in <module>
> > > > >   OSError: [Errno 99] Cannot assign requested address
> > > > >   >>>
> > > > >   >>> s2
> > > > >   <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 10000)>
> > > > >                                                                                                    ^^^ ???
> > > > >   >>> s3 = socket()
> > > > >   >>> s3.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
> > > > >   >>> s3.bind(('0.0.0.0', 10000))
> > > > >   >>> s3
> > > > >   <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 10000)>
> > > > >   >>>
> > > > >   >>> s3.connect(('0.0.0.1', 1))
> > > > >   Traceback (most recent call last):
> > > > >     File "<stdin>", line 1, in <module>
> > > > >   TimeoutError: [Errno 110] Connection timed out
> > > > >   >>>
> > > > >   >>> s3
> > > > >   <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 10000)>
> > > > >
> > > > > We can fire the WARN_ON() by s3.listen().
> > > > >
> > > > >   >>> s3.listen()
> > > > >   [ 1096.845905] ------------[ cut here ]------------
> > > > >   [ 1096.846290] WARNING: CPU: 0 PID: 209 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port+0x6bb/0x9e0
> > > >
> > > > I'm on the head of net-next/master (commit
> > > > bf46390f39c686d62afeae9845860e63886d63b) and trying to repro this
> > > > locally, but the warning isn't showing up for me after following the
> > > > steps above. Not sure why.
> > >
> > > Hmm... it reproduced on top of the commit.  I'm testing on QEMU and login
> > > to serial console which outputs syslog in the same stream, so you may want
> > > to check /var/log/messages or something.
> > >
> > > ---8<---
> > > # sysctl -w net.ipv4.tcp_syn_retries=1
> > > # python3
> > > >>> from socket import *
> > > >>>
> > > >>> s = socket()
> > > >>> s.bind(('0', 10000))
> > > >>> s.connect(('0.0.0.1', 1))
> > > Traceback (most recent call last):
> > >   File "<stdin>", line 1, in <module>
> > > TimeoutError: [Errno 110] Connection timed out
> > > >>> s
> > > <socket.socket fd=3, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 10000)>
> > > >>> s.listen(32)
> > > [   96.598308] ------------[ cut here ]------------
> > > [   96.598598] WARNING: CPU: 0 PID: 214 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port+0x6bb/0x9e0
> > > ...
> > >
> > > >>> s = socket()
> > > >>> s.bind(('0', 10001))
> > > >>> s.connect(('localhost', 1))
> > > Traceback (most recent call last):
> > >   File "<stdin>", line 1, in <module>
> > > ConnectionRefusedError: [Errno 111] Connection refused
> > > >>> s.listen(32)
> > > [  139.157193] ------------[ cut here ]------------
> > > [  139.157528] WARNING: CPU: 0 PID: 214 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port+0x6bb/0x9e0
> > > ---8<---
> > >
> > >
> > > >
> > > > >
> > > > > In the s3 case, connect() resets sk->sk_rcv_saddr to INADDR_ANY without
> > > > > updating the bhash2 bucket; OTOH sk has the correct non-NULL bhash bucket.
> > > >
> > > > To summarize, the path you are talking about is tcp_v4_connect() in
> > > > kernel/linux/net/ipv4/tcp_ipv4.c where the sk originally has saddr
> > > > INADDR_ANY, the sk gets assigned a new address, that new address gets
> > > > updated in the bhash2 table, and then when inet_hash_connect() is
> > > > called, it fails which brings us to the "goto failure". In the failure
> > > > goto, we call "tcp_set_state(sk, TCP_CLOSE)" but in the case where
> > > > "SOCK_BINDPORT_LOCK" is held, "inet_put_port(sk)" is *not* called,
> > > > which means the sk will still be in the bhash2 table with the new
> > > > address.
> > >
> > > Correct.
> > >
> > > More precisely, 3 functions after inet_hash_connect() can cause the same
> > > issue.
> > >
> > > - ip_route_newports
> > > - tcp_fastopen_defer_connect
> > > - tcp_connect
> > >
> > >
> > > >
> > > > > So, when we call listen() for s3, inet_csk_get_port() does not call
> > > > > inet_bind_hash() and the WARN_ON() for bhash2 fires.
> > > > >
> > > > >   if (!inet_csk(sk)->icsk_bind_hash)
> > > > >         inet_bind_hash(sk, tb, tb2, port);
> > > > >   WARN_ON(inet_csk(sk)->icsk_bind_hash != tb);
> > > > >   WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2);
> > > > >
> > > > [...]
> > > > >
> > > > > In the s3 case, connect() falls into a different path.  We reach the
> > > > > sock_error label in __inet_stream_connect() and call sk_prot->disconnect(),
> > > > > which resets sk->sk_rcv_saddr.
> > > >
> > > > This is the case where in __inet_stream_connect(), the call to
> > > > "sk->sk_prot->connect()" succeeds but then the connection is closed by
> > > > RST/timeout/ICMP error, so then the "goto sock_error" is triggered,
> > > > correct?
> > >
> > > Yes.
> > >
> > >
> > > >
> > > > >
> > > > > Then, there could be two subsequent issues.
> > > > >
> > > > >   * listen() leaks a newly allocated bhash2 bucket
> > > > >
> > > > >   * In inet_put_port(), inet_bhashfn_portaddr() computes a wrong hash for
> > > > >     inet_csk(sk)->icsk_bind2_hash, resulting in list corruption.
> > > > >
> > > > > We can fix these easily but it still leaves inconsistent sockets in bhash2,
> > > > > so we need to fix the root cause.
> > > > >
> > > > > As a side note, this issue only happens when we bind() only port before
> > > > > connect().  If we do not bind() port, tcp_set_state(sk, TCP_CLOSE) calls
> > > > > inet_put_port() and unhashes the sk from bhash2.
> > > > >
> > > > >
> > > > > At first, I applied the patch below so that both sk2 and sk3 trigger
> > > > > WARN_ON().  Then, I tried two approaches:
> > > > >
> > > > >   * Fix up the bhash2 entry when calling sk_rcv_saddr
> > > > >
> > > > >   * Change the bhash2 entry only when connect() succeeds
> > > > >
> > > > > The former does not work when we run out of memory.  When we change saddr
> > > > > from INADDR_ANY, inet_bhash2_update_saddr() could free (INADDR_ANY, port)
> > > > > bhash2 bucket.  Then, we possibly could not allocate it again when
> > > > > restoring saddr in the failure path.
> > > > >
> > > > > The latter does not work when a sk is in non-blocking mode.  In this case,
> > > > > a user might not call the second connect() to fix up the bhash2 bucket.
> > > > >
> > > > >   >>> s4 = socket()
> > > > >   >>> s4.bind(('0.0.0.0', 10000))
> > > > >   >>> s4.setblocking(False)
> > > > >   >>> s4
> > > > >   <socket.socket fd=3, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 10000)>
> > > > >
> > > > >   >>> s4.connect(('0.0.0.1', 1))
> > > > >   Traceback (most recent call last):
> > > > >     File "<stdin>", line 1, in <module>
> > > > >   BlockingIOError: [Errno 115] Operation now in progress
> > > > >   >>> s4
> > > > >   <socket.socket fd=3, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('10.0.2.15', 10000)>
> > > > >
> > > > > Also, the former approach does not work for the non-blocking case.  Let's
> > > > > say the second connect() fails.  What if we fail to allocate an INADDR_ANY
> > > > > bhash2 bucket?  We have to change saddr to INADDR_ANY but cannot.... but
> > > > > the connect() actually failed....??
> > > > >
> > > > >   >>> s4.connect(('0.0.0.1', 1))
> > > > >   Traceback (most recent call last):
> > > > >     File "<stdin>", line 1, in <module>
> > > > >   ConnectionRefusedError: [Errno 111] Connection refused
> > > > >   >>> s4
> > > > >   <socket.socket fd=3, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 10000)>
> > > > >
> > > > >
> > > > > Now, I'm thinking bhash2 bucket needs a refcnt not to be freed while
> > > > > refcnt is greater than 1.  And we need to change the conflict logic
> > > > > so that the kernel ignores empty bhash2 bucket.  Such changes could
> > > > > be big for the net tree, but the next LTS will likely be v6.1 which
> > > > > has bhash2.
> > > > >
> > > > > What do you think is the best way to fix the issue?
> > > >
> > > > To summarize your analysis, there is an issue right now where for
> > > > sockets that are binded on address INADDR_ANY,  we need to handle the
> > > > error case where if a connection fails and SOCK_BINDPORT_LOCK is held,
> > > > the new address it was assigned needs to be taken out of bhash2 and
> > > > the original address (INADDR_ANY) needs to be re-added to bhash2.
> > > > There are two of these error cases we need to handle,  as you
> > > > mentioned above - 1) in dccp/tcp_v4_connect() where the connect call
> > > > fails and 2) in __inet_stream_connect() where the connect call
> > > > succeeds but the connection is closed by a RST/timeout/ICMP error.
> > > >
> > > > I think the simplest solution is to modify inet_bhash2_update_saddr()
> > > > so that we don't free the inet_bind2_bucket() for INADDR_ANY/port (if
> > > > it is empty after we update the saddr to the new addr) *until* the
> > > > connect succeeds. When the connect succeeds, then we can check whether
> > > > the inet_bind2_bucket for INADDR_ANY is empty, and if it is, then do
> > > > the freeing for it.
> > > >
> > > > What are your thoughts on this?
> > >
> > > I was thinking the same, but this scenario will break it ?
> > >
> > >   connect() <-- unblocking socket
> > >     return -EINPROGRESS
> > >
> > >   receive SYN+ACK, send back ACK, and set state to TCP_ESTABLISEHD
> > >
> > >   free the old INADDR_ANY bucket
> > >
> > >   get RST and set state to TCP_CLOSE
> > >
> > >   connect()
> > >     goto sock_error and ->disconect() fail to restore the bucket
> > >
>
> I meant all of the above happen at the client side, so the server-side
> code is orthogonal.
>
> But I got your point.  I've misunderstood "When the connect succeeds".
> I was thinking that we'll free bhash2 bucket in the fast path where we
> send back SYN+ACK to the server.  OTOH, you meant it to be when the
> connect() syscall returns 0, right ?
>
> Then, I think it's doable, like
>
>   1) inet_bhash2_update_saddr() increments addrany_tb2->connecting
>
>   2) when connect() succeeds,
>
>      if (dec_and_test(&addrany_tb2->connecting) && is_empty(addrany_tb2->owners))
>          free(addrany_tb2);
>
>   3) while close()ing,
>
>      tb2 = ...
>      addrany_tb2 = ...
>
>      if ((sk->sk_user_locks & SOCK_BINDPORT_LOCK) &&
>          !(sk->sk_user_locks & SOCK_BINDADDR_LOCK) &&
>          tb2 != addrany_tb2 &&
>          sock->state != SS_CONNECTED &&
>          dec_and_test(&addrany_tb2->connecting) &&
>          is_empty(addrany_tb2->owners))
>          free(addrany_tb2)
>
> More consideration would be needed for inet_shutdown() etc though.

Sorry, my terminology was ambiguous :) By "when the connect succeeds",
I meant when the call to tcp_connect() succeeds at the end of
tcp_v4_connect().

There are 2 cases you brought up regarding connection failures on
binded INADDR_ANY sockets that might lead to a bhash2 mismatch:

#1) in dccp/tcp_v4_connect() where an error leads to the "goto failure"
#2) in __inet_stream_connect() where an error leads to the "goto sock_error"

Regarding #2, I don't think this leads to a bhash2 mismatch. The "goto
sock_error" triggers disconnect() and the disconnect() call will
always remove the socket from the bhash and bhash2 tables since the
socket when it was cloned had the SOCK_BINDPORT_LOCK flag unset.

For #1, I think the simplest way to handle this is to not free the
inet_bind2_bucket for INADDR_ANY/port when we call
inet_bhash2_update_saddr(). Then, at the end of the
dccp/tcp_v4/6_connect() call, if it is successful, we free the
INADDR_ANY/port inet_bind2_bucket if it's empty. And if that is not
successful and there was a failure somewhere, then in the "goto
failure", we remove the socket from the new_addr bind bucket / clean
up the new_addr bind bucket and re-add the socket back to the
INADDR_ANY bind bucket.

What are your thoughts?

>
>
> > I don't think this scenario will break it because after a successful
> > connect call, a disconnect will remove the socket from the bhash (and
> > bhash2) table altogether since the socket will *not* have
> > SOCK_BINDPORT_LOCK set.
> >
> > This is the code path I'm looking at:
> >
> > connect call is successful and the three way handshake has completed
> > -> tcp_v4_syn_recv_sock() is called where we create the new socket
> > tcp_v4_syn_recv_sock() -> tcp_create_openreq_child() ->
> > inet_csk_clone_lock() -> sk_clone_lock()
> >
> > In sk_clone_lock(), we create a newsk where newsk->sk_userlocks will
> > *not* have the SOCK_BINDPORT_LOCK flag set (newsk->sk_userlocks =
> > sk->sk_userlocks & ~SOCK_BINDPORT_LOCK;).
> >
> > If the connection gets closed by a RST/timeout/ICMP error, then this
> > socket will go through disconnect() where in the disconnect call, it
> > will remove the socket from the bhash and bhash2 tables. For example,
> > for tcp, this code path is tcp_disconnect() -> tcp_set_state(sk,
> > TCP_CLOSE) -> inet_put_port() - this is also verified by the
> > "WARN_ON(inet->inet_num && !icsk->icsk_bind_hash);" at the end of
> > tcp_disconnect().
> >
> > What are your thoughts?
> >
> > >
> > > >
> > > > Thank you.
> > > >
> > > > >
> > > > > Thank you.
> > > > >
> > > > >
> > > > > ---8<---
> > > > > diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
> > > > > index 713b7b8dad7e..40640c26680e 100644
> > > > > --- a/net/dccp/ipv4.c
> > > > > +++ b/net/dccp/ipv4.c
> > > > > @@ -157,6 +157,8 @@ int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
> > > > >          * This unhashes the socket and releases the local port, if necessary.
> > > > >          */
> > > > >         dccp_set_state(sk, DCCP_CLOSED);
> > > > > +       if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
> > > > > +               inet_reset_saddr(sk);
> > > > >         ip_rt_put(rt);
> > > > >         sk->sk_route_caps = 0;
> > > > >         inet->inet_dport = 0;
> > > > > diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
> > > > > index e57b43006074..626166cb6d7e 100644
> > > > > --- a/net/dccp/ipv6.c
> > > > > +++ b/net/dccp/ipv6.c
> > > > > @@ -985,6 +985,8 @@ static int dccp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
> > > > >
> > > > >  late_failure:
> > > > >         dccp_set_state(sk, DCCP_CLOSED);
> > > > > +       if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
> > > > > +               inet_reset_saddr(sk);
> > > > >         __sk_dst_reset(sk);
> > > > >  failure:
> > > > >         inet->inet_dport = 0;
> > > > > diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
> > > > > index 7a250ef9d1b7..834245da1e95 100644
> > > > > --- a/net/ipv4/tcp_ipv4.c
> > > > > +++ b/net/ipv4/tcp_ipv4.c
> > > > > @@ -343,6 +343,8 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
> > > > >          * if necessary.
> > > > >          */
> > > > >         tcp_set_state(sk, TCP_CLOSE);
> > > > > +       if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
> > > > > +               inet_reset_saddr(sk);
> > > > >         ip_rt_put(rt);
> > > > >         sk->sk_route_caps = 0;
> > > > >         inet->inet_dport = 0;
> > > > > diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
> > > > > index 2a3f9296df1e..81b396e5cf79 100644
> > > > > --- a/net/ipv6/tcp_ipv6.c
> > > > > +++ b/net/ipv6/tcp_ipv6.c
> > > > > @@ -359,6 +359,8 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
> > > > >
> > > > >  late_failure:
> > > > >         tcp_set_state(sk, TCP_CLOSE);
> > > > > +       if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
> > > > > +               inet_reset_saddr(sk);
> > > > >  failure:
> > > > >         inet->inet_dport = 0;
> > > > >         sk->sk_route_caps = 0;
> > > > > ---8<---

Powered by blists - more mailing lists