netdev - [PATCH net] ethernet: s2io: disable napi when start nic failed in s2io_card

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221108005952.73685-1-shaozhengchao@huawei.com>
Date:   Tue, 8 Nov 2022 08:59:52 +0800
From:   Zhengchao Shao <shaozhengchao@...wei.com>
To:     <netdev@...r.kernel.org>, <jdmason@...zu.us>,
        <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
        <pabeni@...hat.com>
CC:     <jeffrey.t.kirsher@...el.com>, <weiyongjun1@...wei.com>,
        <yuehaibing@...wei.com>, <shaozhengchao@...wei.com>
Subject: [PATCH net] ethernet: s2io: disable napi when start nic failed in s2io_card_up()

When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will reports a invalid opcode issue. Fix
it. Only be compiled, not be tested.

Fixes: 86387e1ac4fc ("s2io/vxge: Move the Exar drivers")
Signed-off-by: Zhengchao Shao <shaozhengchao@...wei.com>
---
 drivers/net/ethernet/neterion/s2io.c | 29 +++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index dcf8212119f9..1d3c4474b7cb 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -7128,9 +7128,8 @@ static int s2io_card_up(struct s2io_nic *sp)
 		if (ret) {
 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
 				  dev->name);
-			s2io_reset(sp);
-			free_rx_buffers(sp);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto err_fill_buff;
 		}
 		DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
 			  ring->rx_bufs_left);
@@ -7168,18 +7167,16 @@ static int s2io_card_up(struct s2io_nic *sp)
 	/* Enable Rx Traffic and interrupts on the NIC */
 	if (start_nic(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
-		s2io_reset(sp);
-		free_rx_buffers(sp);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_out;
 	}
 
 	/* Add interrupt service routine */
 	if (s2io_add_isr(sp) != 0) {
 		if (sp->config.intr_type == MSI_X)
 			s2io_rem_isr(sp);
-		s2io_reset(sp);
-		free_rx_buffers(sp);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_out;
 	}
 
 	timer_setup(&sp->alarm_timer, s2io_alarm_handle, 0);
@@ -7199,6 +7196,20 @@ static int s2io_card_up(struct s2io_nic *sp)
 	}
 
 	return 0;
+
+err_out:
+	if (config->napi) {
+		if (config->intr_type == MSI_X) {
+			for (i = 0; i < sp->config.rx_ring_num; i++)
+				napi_disable(&sp->mac_control.rings[i].napi);
+		} else {
+			napi_disable(&sp->napi);
+		}
+	}
+err_fill_buff:
+	s2io_reset(sp);
+	free_rx_buffers(sp);
+	return ret;
 }
 
 /**
-- 
2.17.1