netdev - Re: [PATCH v3 net-next 0/3] net: axienet: Use a DT property to configure frequency of the MDIO bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221108170259.2e95c6c0@kernel.org>
Date:   Tue, 8 Nov 2022 17:02:59 -0800
From:   Jakub Kicinski <kuba@...nel.org>
To:     Andy Chiu <andy.chiu@...ive.com>
Cc:     davem@...emloft.net, andrew@...n.ch, michal.simek@...inx.com,
        radhey.shyam.pandey@...inx.com, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        robh+dt@...nel.org, pabeni@...hat.com, edumazet@...gle.com,
        greentime.hu@...ive.com
Subject: Re: [PATCH v3 net-next 0/3] net: axienet: Use a DT property to
 configure frequency of the MDIO bus

On Fri,  4 Nov 2022 14:03:02 +0800 Andy Chiu wrote:
> Some FPGA platforms have to set frequency of the MDIO bus lower than 2.5
> MHz. Thus, we use a DT property, which is "clock-frequency", to work
> with it at boot time. The default 2.5 MHz would be set if the property
> is not pressent. Also, factor out mdio enable/disable functions due to
> the api change since 253761a0e61b7.

FWIW this patch set was set to Changes Requested in the patchwork
but I don't recall what the reason was. If you're not aware of anyone
requesting changes either - could you just repost to the list again,
the same exact code?