netdev - [PATCH v4 net-next 0/3] net: axienet: Use a DT property to configure frequency of the MDIO bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221117034751.1347105-1-andy.chiu@sifive.com>
Date:   Thu, 17 Nov 2022 11:47:48 +0800
From:   Andy Chiu <andy.chiu@...ive.com>
To:     davem@...emloft.net, andrew@...n.ch, kuba@...nel.org,
        michal.simek@...inx.com, radhey.shyam.pandey@...inx.com
Cc:     netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, robh+dt@...nel.org,
        pabeni@...hat.com, edumazet@...gle.com, andy.chiu@...ive.com,
        greentime.hu@...ive.com
Subject: [PATCH v4 net-next 0/3] net: axienet: Use a DT property to configure frequency of the MDIO bus

Some FPGA platforms have to set frequency of the MDIO bus lower than 2.5
MHz. Thus, we use a DT property, which is "clock-frequency", to work
with it at boot time. The default 2.5 MHz would be set if the property
is not pressent. Also, factor out mdio enable/disable functions due to
the api change since 253761a0e61b7.

Changelog:
--- v4 ---
1. change MAX_MDIO_FREQ to DEFAULT_MDIO_FREQ as suggested by Andrew.
--- v3 RESEND ---
1. Repost the exact same patch again
--- v3 ---
1. Fix coding style, and make probing of the driver fail if MDC overflow
--- v2 ---
1. Use clock-frequency, as defined in mdio.yaml, to configure MDIO
   clock.
2. Only print out frequency if it is set to a non-standard value.
3. Reduce the scope of axienet_mdio_enable and remove
   axienet_mdio_disable because no one really uses it anymore.

Andy Chiu (3):
  net: axienet: Unexport and remove unused mdio functions
  net: axienet: set mdio clock according to bus-frequency
  dt-bindings: describe the support of "clock-frequency" in mdio

 .../bindings/net/xilinx_axienet.txt           |  2 +
 drivers/net/ethernet/xilinx/xilinx_axienet.h  |  2 -
 .../net/ethernet/xilinx/xilinx_axienet_mdio.c | 59 +++++++++++--------
 3 files changed, 35 insertions(+), 28 deletions(-)

-- 
2.36.0