lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 22 Nov 2022 19:11:44 +0800
From:   Yanchao Yang <yanchao.yang@...iatek.com>
To:     Loic Poulain <loic.poulain@...aro.org>,
        Sergey Ryazanov <ryazanov.s.a@...il.com>,
        Johannes Berg <johannes@...solutions.net>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        netdev ML <netdev@...r.kernel.org>,
        kernel ML <linux-kernel@...r.kernel.org>
CC:     MTK ML <linux-mediatek@...ts.infradead.org>,
        Liang Lu <liang.lu@...iatek.com>,
        Haijun Liu <haijun.liu@...iatek.com>,
        Hua Yang <hua.yang@...iatek.com>,
        Ting Wang <ting.wang@...iatek.com>,
        Felix Chen <felix.chen@...iatek.com>,
        Mingliang Xu <mingliang.xu@...iatek.com>,
        Min Dong <min.dong@...iatek.com>,
        Aiden Wang <aiden.wang@...iatek.com>,
        Guohao Zhang <guohao.zhang@...iatek.com>,
        Chris Feng <chris.feng@...iatek.com>,
        Yanchao Yang <yanchao.yang@...iatek.com>,
        Lambert Wang <lambert.wang@...iatek.com>,
        Mingchuang Qiao <mingchuang.qiao@...iatek.com>,
        Xiayu Zhang <xiayu.zhang@...iatek.com>,
        Haozhe Chang <haozhe.chang@...iatek.com>,
        MediaTek Corporation <linuxwwan@...iatek.com>
Subject: [PATCH net-next v1 05/13] net: wwan: tmi: Add control port

From: MediaTek Corporation <linuxwwan@...iatek.com>

The control port consists of port I/O and port manager.
Port I/O provides a common operation as defined by "struct port_ops",
and the operation is managed by the "port manager". It provides
interfaces to internal users, the implemented internal interfaces are
open, close, write and recv_register.

The port manager defines and implements port management interfaces and
structures. It is responsible for port creation, destroying, and managing
port states. It sends data from port I/O to CLDMA via TRB ( Transaction
Request Block ), and dispatches received data from CLDMA to port I/O.
The using port will be held in the "stale list" when the driver destroys
it, and after creating it again, the user can continue to use it.

Signed-off-by: Felix Chen <felix.chen@...iatek.com>
Signed-off-by: MediaTek Corporation <linuxwwan@...iatek.com>
---
 drivers/net/wwan/mediatek/Makefile         |   4 +-
 drivers/net/wwan/mediatek/mtk_ctrl_plane.c | 113 +++
 drivers/net/wwan/mediatek/mtk_ctrl_plane.h |  27 +-
 drivers/net/wwan/mediatek/mtk_port.c       | 981 +++++++++++++++++++++
 drivers/net/wwan/mediatek/mtk_port.h       | 222 +++++
 drivers/net/wwan/mediatek/mtk_port_io.c    | 301 +++++++
 drivers/net/wwan/mediatek/mtk_port_io.h    |  45 +
 drivers/net/wwan/mediatek/pcie/mtk_pci.c   |   2 +
 8 files changed, 1692 insertions(+), 3 deletions(-)
 create mode 100644 drivers/net/wwan/mediatek/mtk_port.c
 create mode 100644 drivers/net/wwan/mediatek/mtk_port.h
 create mode 100644 drivers/net/wwan/mediatek/mtk_port_io.c
 create mode 100644 drivers/net/wwan/mediatek/mtk_port_io.h

diff --git a/drivers/net/wwan/mediatek/Makefile b/drivers/net/wwan/mediatek/Makefile
index 77158d3d587a..177211b92826 100644
--- a/drivers/net/wwan/mediatek/Makefile
+++ b/drivers/net/wwan/mediatek/Makefile
@@ -8,7 +8,9 @@ mtk_tmi-y = \
 	mtk_bm.o \
 	mtk_ctrl_plane.o \
 	mtk_cldma.o \
-	pcie/mtk_cldma_drv_t800.o
+	pcie/mtk_cldma_drv_t800.o \
+	mtk_port.o \
+	mtk_port_io.o
 
 ccflags-y += -I$(srctree)/$(src)/
 ccflags-y += -I$(srctree)/$(src)/pcie/
diff --git a/drivers/net/wwan/mediatek/mtk_ctrl_plane.c b/drivers/net/wwan/mediatek/mtk_ctrl_plane.c
index 4c8f71223a11..74845f8afa3e 100644
--- a/drivers/net/wwan/mediatek/mtk_ctrl_plane.c
+++ b/drivers/net/wwan/mediatek/mtk_ctrl_plane.c
@@ -11,7 +11,113 @@
 #include <linux/wait.h>
 
 #include "mtk_bm.h"
+#include "mtk_cldma.h"
 #include "mtk_ctrl_plane.h"
+#include "mtk_port.h"
+
+static int mtk_ctrl_get_hif_id(unsigned char peer_id)
+{
+	if (peer_id == MTK_PEER_ID_SAP)
+		return CLDMA0;
+	else if (peer_id == MTK_PEER_ID_MD)
+		return CLDMA1;
+	else
+		return -EINVAL;
+}
+
+int mtk_ctrl_vq_search(struct mtk_ctrl_blk *ctrl_blk, unsigned char peer_id,
+		       unsigned char tx_hwq, unsigned char rx_hwq)
+{
+	struct mtk_port_mngr *port_mngr = ctrl_blk->port_mngr;
+	struct mtk_ctrl_trans *trans = ctrl_blk->trans;
+	int hif_id = mtk_ctrl_get_hif_id(peer_id);
+	struct virtq *vq;
+	int vq_num = 0;
+
+	if (hif_id < 0)
+		return -EINVAL;
+
+	do {
+		vq = trans->vq_tbl + vq_num;
+		if (port_mngr->vq_info[vq_num].color && vq->txqno == tx_hwq &&
+		    vq->rxqno == rx_hwq && vq->hif_id == hif_id)
+			return vq_num;
+
+		vq_num++;
+	} while (vq_num < VQ_NUM);
+
+	return -ENOENT;
+}
+
+int mtk_ctrl_vq_color_paint(struct mtk_ctrl_blk *ctrl_blk, unsigned char peer_id,
+			    unsigned char tx_hwq, unsigned char rx_hwq,
+			    unsigned int tx_mtu, unsigned int rx_mtu)
+{
+	struct mtk_port_mngr *port_mngr = ctrl_blk->port_mngr;
+	struct mtk_ctrl_trans *trans = ctrl_blk->trans;
+	int hif_id = mtk_ctrl_get_hif_id(peer_id);
+	struct virtq *vq;
+	int vq_num = 0;
+
+	if (hif_id < 0)
+		return -EINVAL;
+
+	do {
+		vq = trans->vq_tbl + vq_num;
+		if (vq->hif_id == hif_id && vq->txqno == tx_hwq && vq->rxqno == rx_hwq &&
+		    vq->tx_mtu <= tx_mtu && vq->rx_mtu >= rx_mtu)
+			port_mngr->vq_info[vq_num].color = true;
+
+		vq_num++;
+	} while (vq_num < VQ_NUM);
+
+	return 0;
+}
+
+int mtk_ctrl_vq_color_cleanup(struct mtk_ctrl_blk *ctrl_blk, unsigned char peer_id)
+{
+	struct mtk_port_mngr *port_mngr = ctrl_blk->port_mngr;
+	struct mtk_ctrl_trans *trans = ctrl_blk->trans;
+	int hif_id = mtk_ctrl_get_hif_id(peer_id);
+	struct virtq *vq;
+	int vq_num = 0;
+
+	if (hif_id < 0)
+		return -EINVAL;
+
+	do {
+		vq = trans->vq_tbl + vq_num;
+		if (vq->hif_id == hif_id)
+			port_mngr->vq_info[vq_num].color = false;
+
+		vq_num++;
+	} while (vq_num < VQ_NUM);
+
+	return 0;
+}
+
+int mtk_ctrl_trb_submit(struct mtk_ctrl_blk *blk, struct sk_buff *skb)
+{
+	struct mtk_ctrl_trans *trans = blk->trans;
+	struct trb *trb;
+	int vqno;
+
+	trb = (struct trb *)skb->cb;
+	if (trb->vqno >= VQ_NUM)
+		return -EINVAL;
+
+	if (!atomic_read(&trans->available))
+		return -EIO;
+
+	vqno = trb->vqno;
+	if (VQ_LIST_FULL(trans, vqno) && trb->cmd != TRB_CMD_DISABLE)
+		return -EAGAIN;
+
+	/* This function will implement in next patch */
+	wake_up(&trans->trb_srv->trb_waitq);
+
+	return 0;
+}
 
 int mtk_ctrl_init(struct mtk_md_dev *mdev)
 {
@@ -40,8 +146,14 @@ int mtk_ctrl_init(struct mtk_md_dev *mdev)
 		goto err_destroy_pool;
 	}
 
+	err = mtk_port_mngr_init(ctrl_blk);
+	if (err)
+		goto err_destroy_pool_63K;
+
 	return 0;
 
+err_destroy_pool_63K:
+	mtk_bm_pool_destroy(mdev, ctrl_blk->bm_pool_63K);
 err_destroy_pool:
 	mtk_bm_pool_destroy(mdev, ctrl_blk->bm_pool);
 err_free_mem:
@@ -54,6 +166,7 @@ int mtk_ctrl_exit(struct mtk_md_dev *mdev)
 {
 	struct mtk_ctrl_blk *ctrl_blk = mdev->ctrl_blk;
 
+	mtk_port_mngr_exit(ctrl_blk);
 	mtk_bm_pool_destroy(mdev, ctrl_blk->bm_pool);
 	mtk_bm_pool_destroy(mdev, ctrl_blk->bm_pool_63K);
 	devm_kfree(mdev->dev, ctrl_blk);
diff --git a/drivers/net/wwan/mediatek/mtk_ctrl_plane.h b/drivers/net/wwan/mediatek/mtk_ctrl_plane.h
index 427d5a06b3cc..38574dc21455 100644
--- a/drivers/net/wwan/mediatek/mtk_ctrl_plane.h
+++ b/drivers/net/wwan/mediatek/mtk_ctrl_plane.h
@@ -11,9 +11,13 @@
 
 #include "mtk_dev.h"
 
+#define VQ(N)				(N)
+#define VQ_NUM				(2)
+
 #define VQ_MTU_3_5K			(0xE00)
 #define VQ_MTU_63K			(0xFC00)
 
+#define SKB_LIST_MAX_LEN		(16)
 #define BUFF_3_5K_MAX_CNT		(100)
 #define BUFF_63K_MAX_CNT		(64)
 
@@ -21,6 +25,8 @@
 #define HIF_CLASS_SHIFT			(8)
 #define HIF_ID_BITMASK			(0x01)
 
+#define VQ_LIST_FULL(trans, vqno)	((trans)->skb_list[vqno].qlen >= SKB_LIST_MAX_LEN)
+
 enum mtk_trb_cmd_type {
 	TRB_CMD_ENABLE = 1,
 	TRB_CMD_TX,
@@ -42,6 +48,14 @@ struct trb {
 	int (*trb_complete)(struct sk_buff *skb);
 };
 
+struct trb_srv {
+	int vq_cnt;
+	int vq_start;
+	struct mtk_ctrl_trans *trans;
+	wait_queue_head_t trb_waitq;
+	struct task_struct *trb_thread;
+};
+
 struct virtq {
 	int vqno;
 	int hif_id;
@@ -53,8 +67,6 @@ struct virtq {
 	int rx_req_num;
 };
 
-struct mtk_ctrl_trans;
-
 struct hif_ops {
 	int (*init)(struct mtk_ctrl_trans *trans);
 	int (*exit)(struct mtk_ctrl_trans *trans);
@@ -63,20 +75,31 @@ struct hif_ops {
 };
 
 struct mtk_ctrl_trans {
+	struct sk_buff_head skb_list[VQ_NUM];
+	struct trb_srv *trb_srv;
 	struct virtq *vq_tbl;
 	void *dev[HIF_CLASS_NUM];
 	struct hif_ops *ops[HIF_CLASS_NUM];
 	struct mtk_ctrl_blk *ctrl_blk;
 	struct mtk_md_dev *mdev;
+	atomic_t available;
 };
 
 struct mtk_ctrl_blk {
 	struct mtk_md_dev *mdev;
+	struct mtk_port_mngr *port_mngr;
 	struct mtk_ctrl_trans *trans;
 	struct mtk_bm_pool *bm_pool;
 	struct mtk_bm_pool *bm_pool_63K;
 };
 
+int mtk_ctrl_vq_search(struct mtk_ctrl_blk *ctrl_blk, unsigned char peer_id,
+		       unsigned char tx_hwq, unsigned char rx_hwq);
+int mtk_ctrl_vq_color_paint(struct mtk_ctrl_blk *ctrl_blk, unsigned char peer_id,
+			    unsigned char tx_hwq, unsigned char rx_hwq,
+			    unsigned int tx_mtu, unsigned int rx_mtu);
+int mtk_ctrl_vq_color_cleanup(struct mtk_ctrl_blk *ctrl_blk, unsigned char peer_id);
+int mtk_ctrl_trb_submit(struct mtk_ctrl_blk *blk, struct sk_buff *skb);
 int mtk_ctrl_init(struct mtk_md_dev *mdev);
 int mtk_ctrl_exit(struct mtk_md_dev *mdev);
 
diff --git a/drivers/net/wwan/mediatek/mtk_port.c b/drivers/net/wwan/mediatek/mtk_port.c
new file mode 100644
index 000000000000..b9bf2a57f763
--- /dev/null
+++ b/drivers/net/wwan/mediatek/mtk_port.c
@@ -0,0 +1,981 @@
+// SPDX-License-Identifier: BSD-3-Clause-Clear
+/*
+ * Copyright (c) 2022, MediaTek Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#include "mtk_port.h"
+#include "mtk_port_io.h"
+
+#define MTK_DFLT_TRB_TIMEOUT			(5 * HZ)
+#define MTK_DFLT_TRB_STATUS			(0x1)
+#define MTK_CHECK_RX_SEQ_MASK			(0x7fff)
+
+#define MTK_PORT_SEARCH_FROM_RADIX_TREE(p, s) ({\
+	struct mtk_port *_p;			\
+	_p = radix_tree_deref_slot(s);		\
+	if (!_p)				\
+		continue;			\
+	p = _p;					\
+})
+
+#define MTK_PORT_INTERNAL_NODE_CHECK(p, s, i) ({\
+	if (radix_tree_is_internal_node(p)) {	\
+		s = radix_tree_iter_retry(&(i));\
+		continue;			\
+	}					\
+})
+
+/* global group for stale ports */
+static LIST_HEAD(stale_list_grp);
+/* mutex lock for stale_list_group */
+DEFINE_MUTEX(port_mngr_grp_mtx);
+
+static DEFINE_IDA(ccci_dev_ids);
+
+static const struct mtk_port_cfg port_cfg[] = {
+	{CCCI_CONTROL_TX, CCCI_CONTROL_RX, VQ(1), PORT_TYPE_INTERNAL, "MDCTRL", PORT_F_ALLOW_DROP},
+	{CCCI_SAP_CONTROL_TX, CCCI_SAP_CONTROL_RX, VQ(0), PORT_TYPE_INTERNAL, "SAPCTRL",
+	 PORT_F_ALLOW_DROP},
+};
+
+/* This function working always under mutex lock port_mngr_grp_mtx */
+void mtk_port_release(struct kref *port_kref)
+{
+	struct mtk_stale_list *s_list;
+	struct mtk_port *port;
+
+	port = container_of(port_kref, struct mtk_port, kref);
+	/* The port on stale list also be deleted when release this port */
+	if (!test_bit(PORT_S_ON_STALE_LIST, &port->status))
+		goto port_exit;
+
+	list_del(&port->stale_entry);
+	list_for_each_entry(s_list, &stale_list_grp, entry) {
+		/* If this port is the last port of stale list, free the list and dev_id */
+		if (!strncmp(s_list->dev_str, port->dev_str, MTK_DEV_STR_LEN) &&
+		    list_empty(&s_list->ports) && s_list->dev_id >= 0) {
+			pr_info("Free dev id of stale list(%s)\n", s_list->dev_str);
+			ida_free(&ccci_dev_ids, s_list->dev_id);
+			s_list->dev_id = -1;
+			break;
+		}
+	}
+
+port_exit:
+	ports_ops[port->info.type]->exit(port);
+	kfree(port);
+}
+
+static int mtk_port_tbl_add(struct mtk_port_mngr *port_mngr, struct mtk_port *port)
+{
+	int ret;
+
+	ret = radix_tree_insert(&port_mngr->port_tbl[MTK_PORT_TBL_TYPE(port->info.rx_ch)],
+				port->info.rx_ch & 0xFFF, port);
+	if (ret)
+		dev_err(port_mngr->ctrl_blk->mdev->dev,
+			"port(%s) add to port_tbl failed, return %d\n",
+			port->info.name, ret);
+
+	return ret;
+}
+
+static void mtk_port_tbl_del(struct mtk_port_mngr *port_mngr, struct mtk_port *port)
+{
+	radix_tree_delete(&port_mngr->port_tbl[MTK_PORT_TBL_TYPE(port->info.rx_ch)],
+			  port->info.rx_ch & 0xFFF);
+}
+
+static struct mtk_port *mtk_port_get_from_stale_list(struct mtk_port_mngr *port_mngr,
+						     struct mtk_stale_list *s_list,
+						     int rx_ch)
+{
+	struct mtk_port *port, *next_port;
+	int ret;
+
+	mutex_lock(&port_mngr_grp_mtx);
+	list_for_each_entry_safe(port, next_port, &s_list->ports, stale_entry) {
+		if (port->info.rx_ch == rx_ch) {
+			kref_get(&port->kref);
+			list_del(&port->stale_entry);
+			ret = mtk_port_tbl_add(port_mngr, port);
+			if (ret) {
+				list_add_tail(&port->stale_entry, &s_list->ports);
+				kref_put(&port->kref, mtk_port_release);
+				mutex_unlock(&port_mngr_grp_mtx);
+				dev_err(port_mngr->ctrl_blk->mdev->dev,
+					"Failed when adding (%s) to port mngr\n",
+					port->info.name);
+				return ERR_PTR(ret);
+			}
+
+			port->port_mngr = port_mngr;
+			clear_bit(PORT_S_ON_STALE_LIST, &port->status);
+			mutex_unlock(&port_mngr_grp_mtx);
+			return port;
+		}
+	}
+	mutex_unlock(&port_mngr_grp_mtx);
+
+	return NULL;
+}
+
+static struct mtk_port *mtk_port_alloc_or_restore(struct mtk_port_mngr *port_mngr,
+						  struct mtk_port_cfg *dflt_info,
+						  struct mtk_stale_list *s_list)
+{
+	struct mtk_port *port;
+	int ret;
+
+	port = mtk_port_get_from_stale_list(port_mngr, s_list, dflt_info->rx_ch);
+	if (IS_ERR(port)) {
+		/* Failed when adding to port mngr */
+		return port;
+	}
+
+	if (port) {
+		ports_ops[port->info.type]->reset(port);
+		dev_info(port_mngr->ctrl_blk->mdev->dev,
+			 "Port(%s) move from stale list\n", port->info.name);
+		goto return_port;
+	}
+
+	/* This memory will be free in function "mtk_port_release", if
+	 * "mtk_port_release" called by mtk_port_stale_list_grp_cleanup,
+	 * we can't use "devm_free" due to no dev(struct device) entity.
+	 */
+	port = kzalloc(sizeof(*port), GFP_KERNEL);
+	if (!port) {
+		ret = -ENOMEM;
+		goto err_alloc_port;
+	}
+
+	memcpy(port, dflt_info, sizeof(*dflt_info));
+	ret = mtk_port_tbl_add(port_mngr, port);
+	if (ret < 0) {
+		dev_err(port_mngr->ctrl_blk->mdev->dev,
+			"Failed to add port(%s) to port tbl\n", dflt_info->name);
+		goto err_add_port;
+	}
+
+	port->port_mngr = port_mngr;
+	ports_ops[port->info.type]->init(port);
+	dev_info(port_mngr->ctrl_blk->mdev->dev,
+		 "Port(%s) alloc and init\n", port->info.name);
+
+return_port:
+	return port;
+err_add_port:
+	kfree(port);
+err_alloc_port:
+	return ERR_PTR(ret);
+}
+
+static void mtk_port_free_or_backup(struct mtk_port_mngr *port_mngr,
+				    struct mtk_port *port, struct mtk_stale_list *s_list)
+{
+	mutex_lock(&port_mngr_grp_mtx);
+	mtk_port_tbl_del(port_mngr, port);
+	if (port->info.type != PORT_TYPE_INTERNAL) {
+		if (test_bit(PORT_S_OPEN, &port->status)) {
+			/* backup: move using ports to stale list, for no need to
+			 * re-open ports after remove and plug-in device again
+			 */
+			list_add_tail(&port->stale_entry, &s_list->ports);
+			set_bit(PORT_S_ON_STALE_LIST, &port->status);
+			dev_info(port_mngr->ctrl_blk->mdev->dev,
+				 "Port(%s) move to stale list\n", port->info.name);
+			memcpy(port->dev_str, port_mngr->ctrl_blk->mdev->dev_str, MTK_DEV_STR_LEN);
+			port->port_mngr = NULL;
+		}
+		kref_put(&port->kref, mtk_port_release);
+	} else {
+		mtk_port_release(&port->kref);
+	}
+	mutex_unlock(&port_mngr_grp_mtx);
+}
+
+static struct mtk_port *mtk_port_search_by_id(struct mtk_port_mngr *port_mngr, int rx_ch)
+{
+	int tbl_type = MTK_PORT_TBL_TYPE(rx_ch);
+
+	if (tbl_type < PORT_TBL_SAP || tbl_type >= PORT_TBL_MAX)
+		return NULL;
+
+	return radix_tree_lookup(&port_mngr->port_tbl[tbl_type], MTK_CH_ID(rx_ch));
+}
+
+struct mtk_port *mtk_port_search_by_name(struct mtk_port_mngr *port_mngr, char *name)
+{
+	int tbl_type = PORT_TBL_SAP;
+	struct radix_tree_iter iter;
+	struct mtk_port *port;
+	void __rcu **slot;
+
+	do {
+		radix_tree_for_each_slot(slot, &port_mngr->port_tbl[tbl_type], &iter, 0) {
+			MTK_PORT_SEARCH_FROM_RADIX_TREE(port, slot);
+			MTK_PORT_INTERNAL_NODE_CHECK(port, slot, iter);
+			if (!strncmp(port->info.name, name, strlen(port->info.name)))
+				return port;
+		}
+		tbl_type++;
+	} while (tbl_type < PORT_TBL_MAX);
+	return NULL;
+}
+
+static int mtk_port_tbl_create(struct mtk_port_mngr *port_mngr, struct mtk_port_cfg *cfg,
+			       const int port_cnt, struct mtk_stale_list *s_list)
+{
+	struct mtk_port_cfg *dflt_port;
+	struct mtk_port *port;
+	int i, ret;
+
+	INIT_RADIX_TREE(&port_mngr->port_tbl[PORT_TBL_SAP], GFP_KERNEL);
+	INIT_RADIX_TREE(&port_mngr->port_tbl[PORT_TBL_MD], GFP_KERNEL);
+
+	/* copy ports from static port cfg table */
+	for (i = 0; i < port_cnt; i++) {
+		dflt_port = cfg + i;
+		port = mtk_port_alloc_or_restore(port_mngr, dflt_port, s_list);
+		if (IS_ERR(port)) {
+			ret = PTR_ERR(port);
+			goto err_alloc_port;
+		}
+	}
+	return 0;
+
+err_alloc_port:
+	/* free the other ports in port table */
+	for (i--; i >= 0; i--) {
+		dflt_port = cfg + i;
+		port = mtk_port_search_by_id(port_mngr, dflt_port->rx_ch);
+		if (port)
+			mtk_port_free_or_backup(port_mngr, port, s_list);
+	}
+
+	return ret;
+}
+
+static void mtk_port_tbl_destroy(struct mtk_port_mngr *port_mngr, struct mtk_stale_list *s_list)
+{
+	struct radix_tree_iter iter;
+	struct mtk_port *port;
+	void __rcu **slot;
+	int tbl_type;
+
+	/* VQ may be shared by multiple ports, we have to free or move the ports
+	 * after all the ports on the VQ are closed.
+	 */
+	/* 1. All ports disable and send trb to close vq */
+	tbl_type = PORT_TBL_SAP;
+	do {
+		radix_tree_for_each_slot(slot, &port_mngr->port_tbl[tbl_type], &iter, 0) {
+			MTK_PORT_SEARCH_FROM_RADIX_TREE(port, slot);
+			MTK_PORT_INTERNAL_NODE_CHECK(port, slot, iter);
+			ports_ops[port->info.type]->disable(port);
+		}
+		tbl_type++;
+	} while (tbl_type < PORT_TBL_MAX);
+
+	/* 2. After all vq closed, free or backup the ports */
+	tbl_type = PORT_TBL_SAP;
+	do {
+		radix_tree_for_each_slot(slot, &port_mngr->port_tbl[tbl_type], &iter, 0) {
+			MTK_PORT_SEARCH_FROM_RADIX_TREE(port, slot);
+			MTK_PORT_INTERNAL_NODE_CHECK(port, slot, iter);
+			mtk_port_free_or_backup(port_mngr, port, s_list);
+		}
+		tbl_type++;
+	} while (tbl_type < PORT_TBL_MAX);
+}
+
+static struct mtk_stale_list *mtk_port_stale_list_create(struct mtk_port_mngr *port_mngr)
+{
+	struct mtk_stale_list *s_list;
+
+	/* cannot use devm_kzalloc here, because should pair with the free operation which
+	 * may be no dev pointer.
+	 */
+	s_list = kzalloc(sizeof(*s_list), GFP_KERNEL);
+	if (!s_list)
+		return NULL;
+
+	memcpy(s_list->dev_str, port_mngr->ctrl_blk->mdev->dev_str, MTK_DEV_STR_LEN);
+	s_list->dev_id = -1;
+	INIT_LIST_HEAD(&s_list->ports);
+
+	mutex_lock(&port_mngr_grp_mtx);
+	list_add_tail(&s_list->entry, &stale_list_grp);
+	mutex_unlock(&port_mngr_grp_mtx);
+
+	return s_list;
+}
+
+static void mtk_port_stale_list_destroy(struct mtk_stale_list *s_list)
+{
+	mutex_lock(&port_mngr_grp_mtx);
+	list_del(&s_list->entry);
+	mutex_unlock(&port_mngr_grp_mtx);
+	kfree(s_list);
+}
+
+static struct mtk_stale_list *mtk_port_stale_list_search(const char *dev_str)
+{
+	struct mtk_stale_list *tmp, *s_list = NULL;
+
+	mutex_lock(&port_mngr_grp_mtx);
+	list_for_each_entry(tmp, &stale_list_grp, entry) {
+		if (!strncmp(tmp->dev_str, dev_str, MTK_DEV_STR_LEN)) {
+			s_list = tmp;
+			break;
+		}
+	}
+	mutex_unlock(&port_mngr_grp_mtx);
+
+	return s_list;
+}
+
+/* mtk_port_stale_list_grp_cleanup() - free all stale lists and all ports on it.
+ *
+ * This function will be called when driver will be removed. It will search all the stale lists.
+ * For each stale list, it will free the stale ports.
+ *
+ * Return: No return value.
+ */
+void mtk_port_stale_list_grp_cleanup(void)
+{
+	struct mtk_stale_list *s_list, *next_s_list;
+	struct mtk_port *port, *next_port;
+
+	mutex_lock(&port_mngr_grp_mtx);
+	list_for_each_entry_safe(s_list, next_s_list, &stale_list_grp, entry) {
+		list_del(&s_list->entry);
+
+		list_for_each_entry_safe(port, next_port, &s_list->ports, stale_entry) {
+			list_del(&port->stale_entry);
+			mtk_port_release(&port->kref);
+		}
+
+		/* can't use devm_kfree, because the port is free,
+		 * can't use port to get dev pointer
+		 */
+		kfree(s_list);
+	}
+	mutex_unlock(&port_mngr_grp_mtx);
+}
+
+static struct mtk_stale_list *mtk_port_stale_list_init(struct mtk_port_mngr *port_mngr)
+{
+	struct mtk_stale_list *s_list;
+
+	s_list = mtk_port_stale_list_search(port_mngr->ctrl_blk->mdev->dev_str);
+	if (!s_list) {
+		dev_info(port_mngr->ctrl_blk->mdev->dev, "Create stale list\n");
+		s_list = mtk_port_stale_list_create(port_mngr);
+		if (unlikely(!s_list))
+			return NULL;
+	} else {
+		dev_info(port_mngr->ctrl_blk->mdev->dev, "Reuse old stale list\n");
+	}
+
+	mutex_lock(&port_mngr_grp_mtx);
+	if (s_list->dev_id < 0) {
+		port_mngr->dev_id = ida_alloc_range(&ccci_dev_ids, 0,
+						    MTK_DFLT_MAX_DEV_CNT - 1,
+						    GFP_KERNEL);
+	} else {
+		port_mngr->dev_id = s_list->dev_id;
+		s_list->dev_id = -1;
+	}
+	mutex_unlock(&port_mngr_grp_mtx);
+
+	return s_list;
+}
+
+static void mtk_port_stale_list_exit(struct mtk_port_mngr *port_mngr, struct mtk_stale_list *s_list)
+{
+	mutex_lock(&port_mngr_grp_mtx);
+	if (list_empty(&s_list->ports)) {
+		ida_free(&ccci_dev_ids, port_mngr->dev_id);
+		mutex_unlock(&port_mngr_grp_mtx);
+		mtk_port_stale_list_destroy(s_list);
+		dev_info(port_mngr->ctrl_blk->mdev->dev, "Destroy stale list\n");
+	} else {
+		s_list->dev_id = port_mngr->dev_id;
+		mutex_unlock(&port_mngr_grp_mtx);
+		dev_info(port_mngr->ctrl_blk->mdev->dev, "Reserve stale list\n");
+	}
+}
+
+static void mtk_port_trb_init(struct mtk_port *port, struct trb *trb, enum mtk_trb_cmd_type cmd,
+			      int (*trb_complete)(struct sk_buff *skb))
+{
+	kref_init(&trb->kref);
+	trb->vqno = port->info.vq_id;
+	trb->status = MTK_DFLT_TRB_STATUS;
+	trb->priv = port;
+	trb->cmd = cmd;
+	trb->trb_complete = trb_complete;
+}
+
+static void mtk_port_trb_free(struct kref *trb_kref)
+{
+	struct trb *trb = container_of(trb_kref, struct trb, kref);
+	struct mtk_port *port = trb->priv;
+	struct sk_buff *skb;
+
+	skb = container_of((char *)trb, struct sk_buff, cb[0]);
+	if (trb->cmd == TRB_CMD_TX)
+		dev_kfree_skb_any(skb);
+	else
+		mtk_bm_free(port->port_mngr->ctrl_blk->bm_pool, skb);
+}
+
+static int mtk_port_open_trb_complete(struct sk_buff *skb)
+{
+	struct trb_open_priv *trb_open_priv = (struct trb_open_priv *)skb->data;
+	struct trb *trb = (struct trb *)skb->cb;
+	struct mtk_port *port = trb->priv;
+	struct mtk_port_mngr *port_mngr;
+
+	port_mngr = port->port_mngr;
+
+	if (trb->status && trb->status != -EBUSY)
+		goto out;
+
+	if (!trb->status) {
+		/* The first port which opens the VQ should let port_mngr record the MTU */
+		port_mngr->vq_info[trb->vqno].tx_mtu = trb_open_priv->tx_mtu;
+		port_mngr->vq_info[trb->vqno].rx_mtu = trb_open_priv->rx_mtu;
+	}
+
+	port->tx_mtu = port_mngr->vq_info[trb->vqno].tx_mtu;
+	port->rx_mtu = port_mngr->vq_info[trb->vqno].rx_mtu;
+
+	/* Minus the len of the header */
+	port->tx_mtu -= MTK_CCCI_H_ELEN;
+	port->rx_mtu -= MTK_CCCI_H_ELEN;
+
+out:
+	wake_up_interruptible_all(&port->trb_wq);
+
+	dev_info(port->port_mngr->ctrl_blk->mdev->dev,
+		 "Open VQ TRB:status:%d, vq:%d, port:%s, tx_mtu:%d. rx_mtu:%d\n",
+		 trb->status, trb->vqno, port->info.name, port->tx_mtu, port->rx_mtu);
+	kref_put(&trb->kref, mtk_port_trb_free);
+	return 0;
+}
+
+static int mtk_port_close_trb_complete(struct sk_buff *skb)
+{
+	struct trb *trb = (struct trb *)skb->cb;
+	struct mtk_port *port = trb->priv;
+
+	wake_up_interruptible_all(&port->trb_wq);
+	dev_info(port->port_mngr->ctrl_blk->mdev->dev,
+		 "Close VQ TRB: trb->status:%d, vq:%d, port:%s\n",
+		 trb->status, trb->vqno, port->info.name);
+	kref_put(&trb->kref, mtk_port_trb_free);
+
+	return 0;
+}
+
+static int mtk_port_tx_complete(struct sk_buff *skb)
+{
+	struct trb *trb = (struct trb *)skb->cb;
+	struct mtk_port *port = trb->priv;
+
+	if (trb->status < 0)
+		dev_warn(port->port_mngr->ctrl_blk->mdev->dev,
+			 "Failed to send data: trb->status:%d, vq:%d, port:%s\n",
+			 trb->status, trb->vqno, port->info.name);
+
+	if (port->info.flags & PORT_F_BLOCKING)
+		wake_up_interruptible_all(&port->trb_wq);
+
+	kref_put(&trb->kref, mtk_port_trb_free);
+
+	return 0;
+}
+
+static int mtk_port_status_check(struct mtk_port *port)
+{
+	/* If port is enable, it must on port_mngr's port_tbl, so the mdev must exist. */
+	if (!test_bit(PORT_S_ENABLE, &port->status)) {
+		pr_err("[TMI]Unable to use port: (%s) disabled. Caller: %ps\n",
+		       port->info.name, __builtin_return_address(0));
+		return -ENODEV;
+	}
+
+	if (!test_bit(PORT_S_OPEN, &port->status) || test_bit(PORT_S_FLUSH, &port->status) ||
+	    !test_bit(PORT_S_RDWR, &port->status)) {
+		dev_err(port->port_mngr->ctrl_blk->mdev->dev,
+			"Unable to use port: (%s), port status = 0x%lx. Caller: %ps\n",
+			port->info.name, port->status, __builtin_return_address(0));
+
+		return -EBADF;
+	}
+
+	return 0;
+}
+
+/* mtk_port_send_data() - send data to device through trans layer.
+ * @port: pointer to channel structure for sending data.
+ * @data: data to be sent.
+ *
+ * This function will be called by port io.
+ *
+ * Return:
+ *  actual sent data length if success.
+ *  error value if send failed.
+ */
+int mtk_port_send_data(struct mtk_port *port, void *data)
+{
+	struct mtk_port_mngr *port_mngr;
+	struct mtk_ctrl_trans *trans;
+	struct sk_buff *skb = data;
+	struct trb *trb;
+	int ret, len;
+
+	port_mngr = port->port_mngr;
+	trans = port_mngr->ctrl_blk->trans;
+
+	trb = (struct trb *)skb->cb;
+	mtk_port_trb_init(port, trb, TRB_CMD_TX, mtk_port_tx_complete);
+	len = skb->len;
+	kref_get(&trb->kref); /* kref count 1->2 */
+
+submit_trb:
+	mutex_lock(&port->write_lock);
+	ret = mtk_port_status_check(port);
+	if (!ret)
+		ret = mtk_ctrl_trb_submit(port_mngr->ctrl_blk, skb);
+	mutex_unlock(&port->write_lock);
+
+	if (ret == -EAGAIN && port->info.flags & PORT_F_BLOCKING) {
+		dev_warn(port_mngr->ctrl_blk->mdev->dev,
+			 "Failed to submit trb for port(%s), ret=%d\n", port->info.name, ret);
+		wait_event_interruptible(port->trb_wq, !VQ_LIST_FULL(trans, trb->vqno));
+		goto submit_trb;
+	} else if (ret < 0) {
+		dev_warn(port_mngr->ctrl_blk->mdev->dev,
+			 "Failed to submit trb for port(%s), ret=%d\n", port->info.name, ret);
+		kref_put(&trb->kref, mtk_port_trb_free); /* kref count 2->1 */
+		dev_kfree_skb_any(skb);
+		goto end;
+	}
+
+	if (!(port->info.flags & PORT_F_BLOCKING)) {
+		kref_put(&trb->kref, mtk_port_trb_free);
+		ret = len;
+		goto end;
+	}
+start_wait:
+	/* wait trb done, and no timeout in tx blocking mode */
+	ret = wait_event_interruptible_timeout(port->trb_wq,
+					       trb->status <= 0 ||
+					       test_bit(PORT_S_FLUSH, &port->status),
+					       MTK_DFLT_TRB_TIMEOUT);
+
+	if (ret == -ERESTARTSYS)
+		goto start_wait;
+	else if (test_bit(PORT_S_FLUSH, &port->status))
+		ret = -EBUSY;
+	else if (!ret)
+		ret = -ETIMEDOUT;
+	else
+		ret = (!trb->status) ? len : trb->status;
+
+	kref_put(&trb->kref, mtk_port_trb_free);
+
+end:
+	return ret;
+}
+
+static int mtk_port_check_rx_seq(struct mtk_port *port, struct mtk_ccci_header *ccci_h)
+{
+	u16 seq_num, assert_bit;
+
+	seq_num = FIELD_GET(MTK_HDR_FLD_SEQ, le32_to_cpu(ccci_h->status));
+	assert_bit = FIELD_GET(MTK_HDR_FLD_AST, le32_to_cpu(ccci_h->status));
+	if (assert_bit && port->rx_seq &&
+	    ((seq_num - port->rx_seq) & MTK_CHECK_RX_SEQ_MASK) != 1) {
+		dev_err(port->port_mngr->ctrl_blk->mdev->dev,
+			"<ch: %ld> seq num out-of-order %d->%d",
+			FIELD_GET(MTK_HDR_FLD_CHN, le32_to_cpu(ccci_h->status)),
+			seq_num, port->rx_seq);
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+static int mtk_port_rx_dispatch(struct sk_buff *skb, int len, void *priv)
+{
+	struct mtk_port_mngr *port_mngr;
+	struct mtk_ccci_header *ccci_h;
+	struct mtk_port *port = priv;
+	int ret = -EPROTO;
+	u16 channel;
+
+	if (!skb || !priv) {
+		pr_err("[TMI] Invalid input value in rx dispatch\n");
+		ret = -EINVAL;
+		goto err_done;
+	}
+
+	port_mngr = port->port_mngr;
+
+	/* CLDMA will not handle skb structure, so must handle here */
+	skb->len = 0;
+	skb_reset_tail_pointer(skb);
+	skb_put(skb, len);
+
+	ccci_h = mtk_port_strip_header(skb);
+	if (unlikely(!ccci_h)) {
+		dev_warn(port_mngr->ctrl_blk->mdev->dev,
+			 "Unsupported: skb length(%d) is less than ccci header\n",
+			 skb->len);
+		goto drop_data;
+	}
+
+	dev_dbg(port_mngr->ctrl_blk->mdev->dev,
+		"RX header:%08x %08x\n", ccci_h->packet_len, ccci_h->status);
+
+	channel = FIELD_GET(MTK_HDR_FLD_CHN, le32_to_cpu(ccci_h->status));
+	port = mtk_port_search_by_id(port_mngr, channel);
+	if (unlikely(!port)) {
+		dev_warn(port_mngr->ctrl_blk->mdev->dev,
+			 "Failed to find port by channel:%d\n", channel);
+		goto drop_data;
+	}
+
+	/* The sequence number must be continuous */
+	ret = mtk_port_check_rx_seq(port, ccci_h);
+	if (unlikely(ret))
+		goto drop_data;
+
+	port->rx_seq = FIELD_GET(MTK_HDR_FLD_SEQ, le32_to_cpu(ccci_h->status));
+
+	ret = ports_ops[port->info.type]->recv(port, skb);
+
+	return ret;
+
+drop_data:
+	dev_kfree_skb_any(skb);
+err_done:
+	return ret;
+}
+
+/* mtk_port_add_header() - Add mtk_ccci_header to TX packet.
+ * @skb: pointer to socket buffer
+ *
+ * This function is called by trb sevice. And it will help to
+ * add mtk_ccci_header data to the head of skb->data.
+ *
+ */
+int mtk_port_add_header(struct sk_buff *skb)
+{
+	struct mtk_ccci_header *ccci_h;
+	struct mtk_port *port;
+	struct trb *trb;
+	int ret = 0;
+
+	trb = (struct trb *)skb->cb;
+	if (trb->status == 0xADDED)
+		goto end;
+
+	port = trb->priv;
+	if (!port) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	/* Port layer have reserved data length of ccci_head at the skb head */
+	ccci_h = skb_push(skb, sizeof(*ccci_h));
+
+	ccci_h->packet_header = cpu_to_le32(0);
+	ccci_h->packet_len = cpu_to_le32(skb->len);
+	ccci_h->ex_msg = cpu_to_le32(0);
+	ccci_h->status = cpu_to_le32(FIELD_PREP(MTK_HDR_FLD_CHN, port->info.tx_ch) |
+				     FIELD_PREP(MTK_HDR_FLD_SEQ, port->tx_seq++) |
+				     FIELD_PREP(MTK_HDR_FLD_AST, 1));
+
+	trb->status = 0xADDED;
+end:
+	return ret;
+}
+
+/* mtk_port_strip_header() - remove mtk_ccci_header from RX packet.
+ * @skb: pointer to socket buffer.
+ *
+ * This function will help to remove mtk_ccci_header data from the head of skb->data.
+ * But it will not check if the data of skb head is mtk_ccci_header actually.
+ *
+ * Return:
+ *  ccci_h:	pointer to mtk_ccci_header stripped from socket buffer.
+ *  NULL:	data length is invalid.
+ */
+struct mtk_ccci_header *mtk_port_strip_header(struct sk_buff *skb)
+{
+	struct mtk_ccci_header *ccci_h;
+
+	if (skb->len < sizeof(*ccci_h)) {
+		pr_err("[TMI] Invalid input value\n");
+		return NULL;
+	}
+
+	ccci_h = (struct mtk_ccci_header *)skb->data;
+	skb_pull(skb, sizeof(*ccci_h));
+
+	return ccci_h;
+}
+
+/* mtk_port_mngr_vq_status_check() - Checking VQ status before enable or disable VQ.
+ * @skb: pointer to socket buffer
+ *
+ * This function called before enable or disable VQ, check the VQ status by calculate
+ * count of ports which have enabled the VQ.
+ *
+ * Return:
+ *  0:		first user for enable or last user for disable
+ *  -EBUSY:	current VQ is occupied by other ports
+ *  -EINVAL:	error command
+ */
+int mtk_port_mngr_vq_status_check(struct sk_buff *skb)
+{
+	struct trb *trb = (struct trb *)skb->cb;
+	struct trb_open_priv *trb_open_priv;
+	struct mtk_port *port = trb->priv;
+	struct mtk_port_mngr *port_mngr;
+	int ret = 0;
+
+	port_mngr = port->port_mngr;
+	switch (trb->cmd) {
+	case TRB_CMD_ENABLE:
+		port_mngr->vq_info[trb->vqno].port_cnt++;
+		if (port_mngr->vq_info[trb->vqno].port_cnt == 1) {
+			trb_open_priv = (struct trb_open_priv *)skb->data;
+			trb_open_priv->rx_done = mtk_port_rx_dispatch;
+			break;
+		}
+
+		trb->status = -EBUSY;
+		trb->trb_complete(skb);
+		ret = -EBUSY;
+		break;
+	case TRB_CMD_DISABLE:
+		port_mngr->vq_info[trb->vqno].port_cnt--;
+		if (!port_mngr->vq_info[trb->vqno].port_cnt)
+			break;
+
+		dev_info(port_mngr->ctrl_blk->mdev->dev,
+			 "VQ(%d) still has %d port, skip to handle close skb\n",
+			 trb->vqno, port_mngr->vq_info[trb->vqno].port_cnt);
+		trb->status = -EBUSY;
+		trb->trb_complete(skb);
+		ret = -EBUSY;
+		break;
+	default:
+		dev_err(port_mngr->ctrl_blk->mdev->dev, "Invalid trb command(%d)\n", trb->cmd);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/* mtk_port_vq_enable() - Function for enable virtual queue.
+ * @port: pointer to channel structure for sending data.
+ *
+ * This function will be called when enable/create port.
+ *
+ * Return:
+ *  trb->status if success.
+ *  error value if fail.
+ */
+int mtk_port_vq_enable(struct mtk_port *port)
+{
+	struct mtk_port_mngr *port_mngr = port->port_mngr;
+	struct sk_buff *skb;
+	int ret = -ENOMEM;
+	struct trb *trb;
+
+	skb = mtk_bm_alloc(port_mngr->ctrl_blk->bm_pool);
+	if (!skb) {
+		dev_err(port->port_mngr->ctrl_blk->mdev->dev,
+			"Failed to alloc skb of port(%s)\n", port->info.name);
+		goto end;
+	}
+	skb_put(skb, sizeof(struct trb_open_priv));
+	trb = (struct trb *)skb->cb;
+	mtk_port_trb_init(port, trb, TRB_CMD_ENABLE, mtk_port_open_trb_complete);
+	kref_get(&trb->kref);
+
+	ret = mtk_ctrl_trb_submit(port_mngr->ctrl_blk, skb);
+	if (ret) {
+		dev_err(port_mngr->ctrl_blk->mdev->dev,
+			"Failed to submit trb for port(%s), ret=%d\n", port->info.name, ret);
+		kref_put(&trb->kref, mtk_port_trb_free);
+		mtk_port_trb_free(&trb->kref);
+		goto end;
+	}
+
+start_wait:
+	/* wait trb done */
+	ret = wait_event_interruptible_timeout(port->trb_wq, trb->status <= 0,
+					       MTK_DFLT_TRB_TIMEOUT);
+	if (ret == -ERESTARTSYS)
+		goto start_wait;
+	else if (!ret)
+		ret = -ETIMEDOUT;
+	else
+		ret = trb->status;
+
+	kref_put(&trb->kref, mtk_port_trb_free);
+
+end:
+	return ret;
+}
+
+/* mtk_port_vq_disable() - Function for disable virtual queue.
+ * @port: pointer to channel structure for sending data.
+ *
+ * This function will be called when disable/destroy port.
+ *
+ * Return:
+ *  trb->status if success.
+ *  error value if fail.
+ */
+int mtk_port_vq_disable(struct mtk_port *port)
+{
+	struct mtk_port_mngr *port_mngr = port->port_mngr;
+	struct sk_buff *skb;
+	int ret = -ENOMEM;
+	struct trb *trb;
+
+	skb = mtk_bm_alloc(port->port_mngr->ctrl_blk->bm_pool);
+	if (!skb) {
+		dev_err(port->port_mngr->ctrl_blk->mdev->dev,
+			"Failed to alloc skb of port(%s)\n", port->info.name);
+		goto end;
+	}
+	skb_put(skb, sizeof(struct trb_open_priv));
+	trb = (struct trb *)skb->cb;
+	mtk_port_trb_init(port, trb, TRB_CMD_DISABLE, mtk_port_close_trb_complete);
+	kref_get(&trb->kref);
+
+	mutex_lock(&port->write_lock);
+	ret = mtk_ctrl_trb_submit(port_mngr->ctrl_blk, skb);
+	mutex_unlock(&port->write_lock);
+	if (ret) {
+		dev_warn(port_mngr->ctrl_blk->mdev->dev,
+			 "Failed to submit trb for port(%s), ret=%d\n", port->info.name, ret);
+		kref_put(&trb->kref, mtk_port_trb_free);
+		mtk_port_trb_free(&trb->kref);
+		goto end;
+	}
+
+start_wait:
+	/* wait trb done (must wait until close vq done) */
+	ret = wait_event_interruptible(port->trb_wq, trb->status <= 0);
+	if (ret == -ERESTARTSYS)
+		goto start_wait;
+
+	ret = trb->status;
+	kref_put(&trb->kref, mtk_port_trb_free);
+
+end:
+	return ret;
+}
+
+/* mtk_port_mngr_init() - Initialize mtk_port_mngr and mtk_stale_list.
+ * @ctrl_blk: pointer to mtk_ctrl_blk.
+ *
+ * This function called after trans layer complete initialization.
+ * Structure mtk_port_mngr is main body responsible for port management;
+ * and this function alloc memory for it.
+ * If port manager can't find stale list in stale list group by
+ * using dev_str, it will also alloc memory for structure mtk_stale_list.
+ * And then it will initialize port table.
+ *
+ * Return:
+ *  0:			-success to initialize mtk_port_mngr
+ *  -ENOMEM:	-alloc memory for structure failed
+ */
+int mtk_port_mngr_init(struct mtk_ctrl_blk *ctrl_blk)
+{
+	struct mtk_port_mngr *port_mngr;
+	struct mtk_stale_list *s_list;
+	int ret = -ENOMEM;
+
+	port_mngr = devm_kzalloc(ctrl_blk->mdev->dev, sizeof(*port_mngr), GFP_KERNEL);
+	if (unlikely(!port_mngr)) {
+		dev_err(ctrl_blk->mdev->dev, "Failed to alloc memory for port_mngr\n");
+		goto err_done;
+	}
+
+	/* 1.Init port manager basic fields */
+	port_mngr->ctrl_blk = ctrl_blk;
+
+	/* 2.Init mtk_stale_list or re-use old one */
+	s_list = mtk_port_stale_list_init(port_mngr);
+	if (!s_list) {
+		dev_err(ctrl_blk->mdev->dev, "Failed to init mtk_stale_list\n");
+		goto err_init_stale_list;
+	}
+
+	/* 3.Put default ports and stale ports to port table */
+	ret = mtk_port_tbl_create(port_mngr, (struct mtk_port_cfg *)port_cfg,
+				  ARRAY_SIZE(port_cfg), s_list);
+	if (unlikely(ret)) {
+		dev_err(ctrl_blk->mdev->dev, "Failed to create port_tbl\n");
+		goto err_create_tbl;
+	}
+	ctrl_blk->port_mngr = port_mngr;
+	dev_info(ctrl_blk->mdev->dev, "Initialize port_mngr successfully\n");
+
+	return ret;
+
+err_create_tbl:
+	mtk_port_stale_list_exit(port_mngr, s_list);
+err_init_stale_list:
+	devm_kfree(ctrl_blk->mdev->dev, port_mngr);
+err_done:
+	return ret;
+}
+
+/* mtk_port_mngr_exit() - Free the structure mtk_port_mngr.
+ * @ctrl_blk: pointer to mtk_ctrl_blk.
+ *
+ * This function called before trans layer start to exit.
+ * It will destroy port table and stale list, free port manager entity.
+ * If there are ports that are opened, move these ports to stale list
+ * and free the rest ports; if there are ports that are all closed,
+ * then also free stale list.
+ *
+ * Return: No return value.
+ */
+void mtk_port_mngr_exit(struct mtk_ctrl_blk *ctrl_blk)
+{
+	struct mtk_port_mngr *port_mngr = ctrl_blk->port_mngr;
+	struct mtk_stale_list *s_list;
+
+	s_list = mtk_port_stale_list_search(port_mngr->ctrl_blk->mdev->dev_str);
+	/* 1.free or backup ports, then destroy port table */
+	mtk_port_tbl_destroy(port_mngr, s_list);
+	/* 2.destroy stale list or backup register info to it */
+	mtk_port_stale_list_exit(port_mngr, s_list);
+	/* 3.free port_mngr structure */
+	devm_kfree(ctrl_blk->mdev->dev, port_mngr);
+	ctrl_blk->port_mngr = NULL;
+	dev_info(ctrl_blk->mdev->dev, "Exit port_mngr successfully\n");
+}
diff --git a/drivers/net/wwan/mediatek/mtk_port.h b/drivers/net/wwan/mediatek/mtk_port.h
new file mode 100644
index 000000000000..56ed82c41cc2
--- /dev/null
+++ b/drivers/net/wwan/mediatek/mtk_port.h
@@ -0,0 +1,222 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear
+ *
+ * Copyright (c) 2022, MediaTek Inc.
+ */
+
+#ifndef __MTK_PORT_H__
+#define __MTK_PORT_H__
+
+#include <linux/bits.h>
+#include <linux/mutex.h>
+#include <linux/radix-tree.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+
+#include "mtk_ctrl_plane.h"
+#include "mtk_dev.h"
+
+#define MTK_PEER_ID_MASK	(0xF000)
+#define MTK_PEER_ID_SHIFT	(12)
+#define MTK_PEER_ID(ch)		(((ch) & MTK_PEER_ID_MASK) >> MTK_PEER_ID_SHIFT)
+#define MTK_PEER_ID_SAP		(0x1)
+#define MTK_PEER_ID_MD		(0x2)
+#define MTK_CH_ID_MASK		(0x0FFF)
+#define MTK_CH_ID(ch)		((ch) & MTK_CH_ID_MASK)
+#define MTK_DFLT_MAX_DEV_CNT	(10)
+#define MTK_DFLT_PORT_NAME_LEN	(20)
+
+/* Mapping MTK_PEER_ID and mtk_port_tbl index */
+#define MTK_PORT_TBL_TYPE(ch)	(MTK_PEER_ID(ch) - 1)
+
+/* ccci header length + reserved space that is used in exception flow */
+#define MTK_CCCI_H_ELEN		(128)
+
+#define MTK_HDR_FLD_AST		((u32)BIT(31))
+#define MTK_HDR_FLD_SEQ		GENMASK(30, 16)
+#define MTK_HDR_FLD_CHN		GENMASK(15, 0)
+
+#define MTK_INFO_FLD_EN		((u16)BIT(15))
+#define MTK_INFO_FLD_CHID	GENMASK(14, 0)
+
+/* enum mtk_port_status - Descript port's some status.
+ * @PORT_S_DFLT: default value when port initialize.
+ * @PORT_S_ENABLE: port has been enabled.
+ * @PORT_S_OPEN: port has been opened.
+ * @PORT_S_RDWR: port R/W is allowed.
+ * @PORT_S_FLUSH: driver is flushing.
+ * @PORT_S_ON_STALE_LIST: port is on stale list.
+ */
+enum mtk_port_status {
+	PORT_S_DFLT = 0,
+	PORT_S_ENABLE,
+	PORT_S_OPEN,
+	PORT_S_RDWR,
+	PORT_S_FLUSH,
+	PORT_S_ON_STALE_LIST,
+};
+
+enum mtk_ccci_ch {
+	/* to sAP */
+	CCCI_SAP_CONTROL_RX = 0x1000,
+	CCCI_SAP_CONTROL_TX = 0x1001,
+	/* to MD */
+	CCCI_CONTROL_RX = 0x2000,
+	CCCI_CONTROL_TX = 0x2001,
+};
+
+enum mtk_port_flag {
+	PORT_F_DFLT = 0,
+	PORT_F_BLOCKING = BIT(1),
+	PORT_F_ALLOW_DROP = BIT(2),
+};
+
+enum mtk_port_tbl {
+	PORT_TBL_SAP,
+	PORT_TBL_MD,
+	PORT_TBL_MAX
+};
+
+enum mtk_port_type {
+	PORT_TYPE_INTERNAL,
+	PORT_TYPE_MAX
+};
+
+struct mtk_internal_port {
+	void *arg;
+	int (*recv_cb)(void *arg, struct sk_buff *skb);
+};
+
+/* union mtk_port_priv - Contains private data for different type of ports.
+ * @i_priv: private data for internal other user.
+ */
+union mtk_port_priv {
+	struct mtk_internal_port i_priv;
+};
+
+/* struct mtk_port_cfg - Contains port's basic configuration.
+ * @tx_ch: TX channel id (peer id (bit 12~15)+ channel id(bit 0 ~11)).
+ * @rx_ch: RX channel id.
+ * @vq_id: virtual queue id.
+ * @type: port type.
+ * @name: port name.
+ * @flags: port flags.
+ */
+struct mtk_port_cfg {
+	enum mtk_ccci_ch tx_ch;
+	enum mtk_ccci_ch rx_ch;
+	unsigned char vq_id;
+	enum mtk_port_type type;
+	char name[MTK_DFLT_PORT_NAME_LEN];
+	unsigned char flags;
+};
+
+/* struct mtk_port - Represents a port of the control plane.
+ * @mtk_port_cfg: port's basic configuration.
+ * @kref: reference count.
+ * @enable: enable msg from modem.
+ * @status: port's current state, like open, enable etc.
+ * @minor: device minor id offset.
+ * @tx_seq: TX sequence id for mtk_ccci_header.
+ * @rx_seq: RX sequence id for mtk_ccci_header.
+ * @tx_mtu: TX max trans unit (64k at most).
+ * @rx_mtu: RX max trans unit (64k at most).
+ * @rx_skb_list: RX skb buffer.
+ * @rx_data_len: data length in RX skb buffer.
+ * @rx_buf_size: max size of RX skb buffer.
+ * @trb_wq: wait queue for trb submit.
+ * @rx_wq: wait queue for reading.
+ * @read_buf_lock: mutex lock used in user read function.
+ * @stale_entry: list head entry for stale list.
+ * @dev_str: string to identify the device which the port belongs.
+ * @port_mngr: point to mtk_port_mngr.
+ * @priv: private data for different type.
+ */
+struct mtk_port {
+	struct mtk_port_cfg info;
+	struct kref kref;
+	bool enable;
+	unsigned long status;
+	unsigned int minor;
+	unsigned short tx_seq;
+	unsigned short rx_seq;
+	unsigned int tx_mtu;
+	unsigned int rx_mtu;
+	struct sk_buff_head rx_skb_list;
+	unsigned int rx_data_len;
+	unsigned int rx_buf_size;
+	wait_queue_head_t trb_wq;
+	wait_queue_head_t rx_wq;
+	/* Use write_lock to lock user's write and disable thread */
+	struct mutex write_lock;
+	/* Used to lock user's read thread */
+	struct mutex read_buf_lock;
+	struct list_head stale_entry;
+	char dev_str[MTK_DEV_STR_LEN];
+	struct mtk_port_mngr *port_mngr;
+	union mtk_port_priv priv;
+};
+
+struct mtk_vq_info {
+	int tx_mtu;
+	int rx_mtu;
+	unsigned int port_cnt;
+	bool color;
+};
+
+/* struct mtk_port_mngr - Include all the port information of a device.
+ * @ctrl_blk: pointer to mtk_ctrl_blk structure.
+ * @port_tbl: the table which manages sAP ports and md ports.
+ * @vq_info : manages the control port's virtual queue.
+ * @port_attr_kobj: pointer to attribute kobject structure.
+ * @dev_id: index to identify the device.
+ */
+struct mtk_port_mngr {
+	struct mtk_ctrl_blk *ctrl_blk;
+	struct radix_tree_root port_tbl[PORT_TBL_MAX];
+	struct mtk_vq_info vq_info[VQ_NUM];
+	struct kobject *port_attr_kobj;
+	int dev_id;
+};
+
+struct mtk_stale_list {
+	struct list_head entry;
+	struct list_head ports;
+	char dev_str[MTK_DEV_STR_LEN];
+	int dev_id;
+};
+
+struct mtk_port_info {
+	__le16 channel;
+	__le16 reserved;
+} __packed;
+
+struct mtk_port_enum_msg {
+	__le32 head_pattern;
+	__le16 port_cnt;
+	__le16 version;
+	__le32 tail_pattern;
+	u8 data[];
+} __packed;
+
+struct mtk_ccci_header {
+	__le32 packet_header;
+	__le32 packet_len;
+	__le32 status;
+	__le32 ex_msg;
+};
+
+extern const struct port_ops *ports_ops[PORT_TYPE_MAX];
+
+void mtk_port_release(struct kref *port_kref);
+struct mtk_port *mtk_port_search_by_name(struct mtk_port_mngr *port_mngr, char *name);
+void mtk_port_stale_list_grp_cleanup(void);
+int mtk_port_add_header(struct sk_buff *skb);
+struct mtk_ccci_header *mtk_port_strip_header(struct sk_buff *skb);
+int mtk_port_send_data(struct mtk_port *port, void *data);
+int mtk_port_vq_enable(struct mtk_port *port);
+int mtk_port_vq_disable(struct mtk_port *port);
+int mtk_port_mngr_vq_status_check(struct sk_buff *skb);
+int mtk_port_mngr_init(struct mtk_ctrl_blk *ctrl_blk);
+void mtk_port_mngr_exit(struct mtk_ctrl_blk *ctrl_blk);
+
+#endif /* __MTK_PORT_H__ */
diff --git a/drivers/net/wwan/mediatek/mtk_port_io.c b/drivers/net/wwan/mediatek/mtk_port_io.c
new file mode 100644
index 000000000000..efbbe97c50dd
--- /dev/null
+++ b/drivers/net/wwan/mediatek/mtk_port_io.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: BSD-3-Clause-Clear
+/*
+ * Copyright (c) 2022, MediaTek Inc.
+ */
+
+#include "mtk_port_io.h"
+
+#define MTK_DFLT_READ_TIMEOUT		(1 * HZ)
+
+static int mtk_port_get_locked(struct mtk_port *port)
+{
+	int ret = 0;
+
+	/* Protect the structure not released suddenly during the check */
+	mutex_lock(&port_mngr_grp_mtx);
+	if (!port) {
+		mutex_unlock(&port_mngr_grp_mtx);
+		pr_err("[TMI] Port does not exist\n");
+		return -ENODEV;
+	}
+	kref_get(&port->kref);
+	mutex_unlock(&port_mngr_grp_mtx);
+
+	return ret;
+}
+
+/* After calling the mtk_port_put_locked(),
+ * do not use the port pointer because the port structure might be freed.
+ */
+static void mtk_port_put_locked(struct mtk_port *port)
+{
+	mutex_lock(&port_mngr_grp_mtx);
+	kref_put(&port->kref, mtk_port_release);
+	mutex_unlock(&port_mngr_grp_mtx);
+}
+
+static void mtk_port_struct_init(struct mtk_port *port)
+{
+	port->tx_seq = 0;
+	port->rx_seq = -1;
+	clear_bit(PORT_S_ENABLE, &port->status);
+	kref_init(&port->kref);
+	skb_queue_head_init(&port->rx_skb_list);
+	port->rx_buf_size = MTK_RX_BUF_SIZE;
+	init_waitqueue_head(&port->trb_wq);
+	init_waitqueue_head(&port->rx_wq);
+	mutex_init(&port->read_buf_lock);
+}
+
+static int mtk_port_internal_init(struct mtk_port *port)
+{
+	mtk_port_struct_init(port);
+	port->enable = false;
+
+	return 0;
+}
+
+static int mtk_port_internal_exit(struct mtk_port *port)
+{
+	if (test_bit(PORT_S_ENABLE, &port->status))
+		ports_ops[port->info.type]->disable(port);
+
+	return 0;
+}
+
+static int mtk_port_reset(struct mtk_port *port)
+{
+	port->tx_seq = 0;
+	port->rx_seq = -1;
+
+	return 0;
+}
+
+static int mtk_port_internal_enable(struct mtk_port *port)
+{
+	int ret;
+
+	if (test_bit(PORT_S_ENABLE, &port->status)) {
+		dev_info(port->port_mngr->ctrl_blk->mdev->dev,
+			 "Skip to enable port( %s )\n", port->info.name);
+		return 0;
+	}
+
+	ret = mtk_port_vq_enable(port);
+	if (ret && ret != -EBUSY)
+		return ret;
+
+	set_bit(PORT_S_RDWR, &port->status);
+	set_bit(PORT_S_ENABLE, &port->status);
+	dev_info(port->port_mngr->ctrl_blk->mdev->dev,
+		 "Port(%s) enable is complete\n", port->info.name);
+
+	return 0;
+}
+
+static int mtk_port_internal_disable(struct mtk_port *port)
+{
+	if (!test_and_clear_bit(PORT_S_ENABLE, &port->status)) {
+		dev_info(port->port_mngr->ctrl_blk->mdev->dev,
+			 "Skip to disable port(%s)\n", port->info.name);
+		return 0;
+	}
+
+	clear_bit(PORT_S_RDWR, &port->status);
+	mtk_port_vq_disable(port);
+
+	dev_info(port->port_mngr->ctrl_blk->mdev->dev,
+		 "Port(%s) disable is complete\n", port->info.name);
+
+	return 0;
+}
+
+static int mtk_port_internal_recv(struct mtk_port *port, struct sk_buff *skb)
+{
+	struct mtk_internal_port *priv;
+	int ret = -ENXIO;
+
+	if (!test_bit(PORT_S_OPEN, &port->status)) {
+		/* If current port is not opened by any user, the received data will be dropped */
+		dev_warn_ratelimited(port->port_mngr->ctrl_blk->mdev->dev,
+				     "Unabled to recv: (%s) not opened\n", port->info.name);
+		goto drop_data;
+	}
+
+	priv = &port->priv.i_priv;
+	if (!priv->recv_cb || !priv->arg) {
+		dev_warn_ratelimited(port->port_mngr->ctrl_blk->mdev->dev,
+				     "Invalid (%s) recv_cb, drop packet\n", port->info.name);
+		goto drop_data;
+	}
+
+	ret = priv->recv_cb(priv->arg, skb);
+	return ret;
+
+drop_data:
+	mtk_port_free_rx_skb(port, skb);
+	return ret;
+}
+
+static int mtk_port_common_open(struct mtk_port *port)
+{
+	int ret = 0;
+
+	if (!test_bit(PORT_S_ENABLE, &port->status)) {
+		pr_err("[TMI] Failed to open: (%s) is disabled\n", port->info.name);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	if (test_bit(PORT_S_OPEN, &port->status)) {
+		dev_warn(port->port_mngr->ctrl_blk->mdev->dev,
+			 "Unabled to open port(%s) twice\n", port->info.name);
+		ret = -EBUSY;
+		goto err;
+	}
+
+	dev_info(port->port_mngr->ctrl_blk->mdev->dev, "Open port %s\n", port->info.name);
+	skb_queue_purge(&port->rx_skb_list);
+	set_bit(PORT_S_OPEN, &port->status);
+
+err:
+	return ret;
+}
+
+static void mtk_port_common_close(struct mtk_port *port)
+{
+	dev_info(port->port_mngr->ctrl_blk->mdev->dev, "Close port %s\n", port->info.name);
+
+	clear_bit(PORT_S_OPEN, &port->status);
+
+	skb_queue_purge(&port->rx_skb_list);
+}
+
+/* mtk_port_internal_open() - Function for open internal port.
+ * @mdev: pointer to mtk_md_dev.
+ * @name: the name of port will be opened.
+ * @flag: optional operation type.
+ *
+ * This function called by FSM. Used to open interal port MDCTRL/SAPCTRL,
+ * when need to transer some control message.
+ *
+ * Return:
+ *  mtk_port structure if success.
+ *  error valude if fail.
+ */
+void *mtk_port_internal_open(struct mtk_md_dev *mdev, char *name, int flag)
+{
+	struct mtk_port_mngr *port_mngr;
+	struct mtk_ctrl_blk *ctrl_blk;
+	struct mtk_port *port;
+	int ret;
+
+	ctrl_blk = mdev->ctrl_blk;
+	port_mngr = ctrl_blk->port_mngr;
+
+	port = mtk_port_search_by_name(port_mngr, name);
+	ret = mtk_port_get_locked(port);
+	if (ret)
+		goto err;
+
+	ret = mtk_port_common_open(port);
+	if (ret) {
+		mtk_port_put_locked(port);
+		goto err;
+	}
+
+	if (flag & O_NONBLOCK)
+		port->info.flags &= ~PORT_F_BLOCKING;
+	else
+		port->info.flags |= PORT_F_BLOCKING;
+err:
+	return port;
+}
+
+/* mtk_port_internal_close() - Function for close internal port.
+ * @i_port: which port need close.
+ *
+ * This function called by FSM. Used to close interal port MDCTRL/SAPCTRL.
+ *
+ * Return:
+ *  0:		success.
+ *  -EINVAL:	port is NULL.
+ *  -EBADF:	port is not opened.
+ */
+int mtk_port_internal_close(void *i_port)
+{
+	struct mtk_port *port = i_port;
+	int ret = 0;
+
+	if (!port) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* Avoid close port twice */
+	if (!test_bit(PORT_S_OPEN, &port->status)) {
+		pr_err("[TMI] Port(%s) has been closed\n", port->info.name);
+		ret = -EBADF;
+		goto err;
+	}
+
+	mtk_port_common_close(port);
+	mtk_port_put_locked(port);
+err:
+	return ret;
+}
+
+/* mtk_port_internal_write() - Function for writing interal data.
+ * @i_port: pointer to mtk_port, indicate channel for sending data.
+ * @skb:    inlude the data to be sent.
+ *
+ * This function called by FSM. Used to write control message through
+ * interal port MDCTRL/SAPCTRL, example of handshake message.
+ *
+ * Return:
+ *  actual sent data length if success.
+ *  error value if send failed.
+ */
+int mtk_port_internal_write(void *i_port, struct sk_buff *skb)
+{
+	struct mtk_port *port = i_port;
+
+	if (!port)
+		return -EINVAL;
+
+	return mtk_port_send_data(port, skb);
+}
+
+/* mtk_port_internal_recv_register() - Function for register receive callback.
+ * @i_port: pointer to mtk_port, indicate channel for receiving data.
+ * @cb:     callback for receiving data.
+ *
+ * This function called by FSM. Used to register callback for receiving data.
+ *
+ * Return: No return valude.
+ *
+ */
+void mtk_port_internal_recv_register(void *i_port,
+				     int (*cb)(void *priv, struct sk_buff *skb),
+				     void *arg)
+{
+	struct mtk_port *port = i_port;
+	struct mtk_internal_port *priv;
+
+	priv = &port->priv.i_priv;
+	priv->arg = arg;
+	priv->recv_cb = cb;
+}
+
+static const struct port_ops port_internal_ops = {
+	.init = mtk_port_internal_init,
+	.exit = mtk_port_internal_exit,
+	.reset = mtk_port_reset,
+	.enable = mtk_port_internal_enable,
+	.disable = mtk_port_internal_disable,
+	.recv = mtk_port_internal_recv,
+};
+
+const struct port_ops *ports_ops[PORT_TYPE_MAX] = {
+	&port_internal_ops,
+};
diff --git a/drivers/net/wwan/mediatek/mtk_port_io.h b/drivers/net/wwan/mediatek/mtk_port_io.h
new file mode 100644
index 000000000000..859ade43d923
--- /dev/null
+++ b/drivers/net/wwan/mediatek/mtk_port_io.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear
+ *
+ * Copyright (c) 2022, MediaTek Inc.
+ */
+
+#ifndef __MTK_PORT_IO_H__
+#define __MTK_PORT_IO_H__
+
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+
+#include "mtk_bm.h"
+#include "mtk_port.h"
+
+#define MTK_RX_BUF_SIZE			(1024 * 1024)
+
+extern struct mutex port_mngr_grp_mtx;
+
+struct port_ops {
+	int (*init)(struct mtk_port *port);
+	int (*exit)(struct mtk_port *port);
+	int (*reset)(struct mtk_port *port);
+	int (*enable)(struct mtk_port *port);
+	int (*disable)(struct mtk_port *port);
+	int (*recv)(struct mtk_port *port, struct sk_buff *skb);
+};
+
+void *mtk_port_internal_open(struct mtk_md_dev *mdev, char *name, int flag);
+int mtk_port_internal_close(void *i_port);
+int mtk_port_internal_write(void *i_port, struct sk_buff *skb);
+void mtk_port_internal_recv_register(void *i_port,
+				     int (*cb)(void *priv, struct sk_buff *skb),
+				     void *arg);
+
+static inline void mtk_port_free_rx_skb(struct mtk_port *port, struct sk_buff *skb)
+{
+	if (!port)
+		dev_kfree_skb_any(skb);
+	else if (port->rx_mtu > VQ_MTU_3_5K)
+		mtk_bm_free(port->port_mngr->ctrl_blk->bm_pool_63K, skb);
+	else
+		mtk_bm_free(port->port_mngr->ctrl_blk->bm_pool, skb);
+}
+
+#endif /* __MTK_PORT_IO_H__ */
diff --git a/drivers/net/wwan/mediatek/pcie/mtk_pci.c b/drivers/net/wwan/mediatek/pcie/mtk_pci.c
index 5be61178d30d..49cd98627410 100644
--- a/drivers/net/wwan/mediatek/pcie/mtk_pci.c
+++ b/drivers/net/wwan/mediatek/pcie/mtk_pci.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 
 #include "mtk_pci.h"
+#include "mtk_port_io.h"
 #include "mtk_reg.h"
 
 #define MTK_PCI_TRANSPARENT_ATR_SIZE	(0x3F)
@@ -1158,6 +1159,7 @@ module_init(mtk_drv_init);
 static void __exit mtk_drv_exit(void)
 {
 	pci_unregister_driver(&mtk_pci_drv);
+	mtk_port_stale_list_grp_cleanup();
 }
 module_exit(mtk_drv_exit);
 
-- 
2.32.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ