| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20221122173648.737720888@linutronix.de>
Date: Tue, 22 Nov 2022 18:45:01 +0100 (CET)
From: Thomas Gleixner <tglx@...utronix.de>
To: LKML <linux-kernel@...r.kernel.org>
Cc: Linus Torvalds <torvalds@...uxfoundation.org>,
Steven Rostedt <rostedt@...dmis.org>,
Anna-Maria Behnsen <anna-maria@...utronix.de>,
Peter Zijlstra <peterz@...radead.org>,
Stephen Boyd <sboyd@...nel.org>,
Guenter Roeck <linux@...ck-us.net>,
Andrew Morton <akpm@...ux-foundation.org>,
Julia Lawall <Julia.Lawall@...ia.fr>,
Arnd Bergmann <arnd@...db.de>,
Viresh Kumar <viresh.kumar@...aro.org>,
Marc Zyngier <maz@...nel.org>,
Marcel Holtmann <marcel@...tmann.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
linux-bluetooth@...r.kernel.org,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org
Subject: [patch V2 11/17] Documentation: Replace del_timer/del_timer_sync()
Adjust to the new preferred function names.
Suggested-by: Steven Rostedt <rostedt@...dmis.org>
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
---
Documentation/RCU/Design/Requirements/Requirements.rst | 2 +-
Documentation/core-api/local_ops.rst | 2 +-
Documentation/kernel-hacking/locking.rst | 11 +++++------
Documentation/timers/hrtimers.rst | 2 +-
Documentation/translations/it_IT/kernel-hacking/locking.rst | 10 +++++-----
Documentation/translations/zh_CN/core-api/local_ops.rst | 2 +-
6 files changed, 14 insertions(+), 15 deletions(-)
--- a/Documentation/RCU/Design/Requirements/Requirements.rst
+++ b/Documentation/RCU/Design/Requirements/Requirements.rst
@@ -1858,7 +1858,7 @@ unloaded. After a given module has been
one of its functions results in a segmentation fault. The module-unload
functions must therefore cancel any delayed calls to loadable-module
functions, for example, any outstanding mod_timer() must be dealt
-with via del_timer_sync() or similar.
+with via timer_delete_sync() or similar.
Unfortunately, there is no way to cancel an RCU callback; once you
invoke call_rcu(), the callback function is eventually going to be
--- a/Documentation/core-api/local_ops.rst
+++ b/Documentation/core-api/local_ops.rst
@@ -191,7 +191,7 @@ Here is a sample module which implements
static void __exit test_exit(void)
{
- del_timer_sync(&test_timer);
+ timer_delete_sync(&test_timer);
}
module_init(test_init);
--- a/Documentation/kernel-hacking/locking.rst
+++ b/Documentation/kernel-hacking/locking.rst
@@ -967,7 +967,7 @@ If you want to destroy the entire collec
while (list) {
struct foo *next = list->next;
- del_timer(&list->timer);
+ timer_delete(&list->timer);
kfree(list);
list = next;
}
@@ -981,7 +981,7 @@ the lock after we spin_unlock_bh(), and
the element (which has already been freed!).
This can be avoided by checking the result of
-del_timer(): if it returns 1, the timer has been deleted.
+timer_delete(): if it returns 1, the timer has been deleted.
If 0, it means (in this case) that it is currently running, so we can
do::
@@ -990,7 +990,7 @@ If 0, it means (in this case) that it is
while (list) {
struct foo *next = list->next;
- if (!del_timer(&list->timer)) {
+ if (!timer_delete(&list->timer)) {
/* Give timer a chance to delete this */
spin_unlock_bh(&list_lock);
goto retry;
@@ -1005,8 +1005,7 @@ If 0, it means (in this case) that it is
Another common problem is deleting timers which restart themselves (by
calling add_timer() at the end of their timer function).
Because this is a fairly common case which is prone to races, you should
-use del_timer_sync() (``include/linux/timer.h``) to
-handle this case.
+use timer_delete_sync() (``include/linux/timer.h``) to handle this case.
Locking Speed
=============
@@ -1334,7 +1333,7 @@ lock.
- kfree()
-- add_timer() and del_timer()
+- add_timer() and timer_delete()
Mutex API reference
===================
--- a/Documentation/timers/hrtimers.rst
+++ b/Documentation/timers/hrtimers.rst
@@ -118,7 +118,7 @@ existing timer wheel code, as it is matu
was not really a win, due to the different data structures. Also, the
hrtimer functions now have clearer behavior and clearer names - such as
hrtimer_try_to_cancel() and hrtimer_cancel() [which are roughly
-equivalent to del_timer() and del_timer_sync()] - so there's no direct
+equivalent to timer_delete() and timer_delete_sync()] - so there's no direct
1:1 mapping between them on the algorithmic level, and thus no real
potential for code sharing either.
--- a/Documentation/translations/it_IT/kernel-hacking/locking.rst
+++ b/Documentation/translations/it_IT/kernel-hacking/locking.rst
@@ -990,7 +990,7 @@ Se volete eliminare l'intera collezione
while (list) {
struct foo *next = list->next;
- del_timer(&list->timer);
+ timer_delete(&list->timer);
kfree(list);
list = next;
}
@@ -1003,7 +1003,7 @@ e prenderà il *lock* solo dopo spin_unl
di eliminare il suo oggetto (che però è già stato eliminato).
Questo può essere evitato controllando il valore di ritorno di
-del_timer(): se ritorna 1, il temporizzatore è stato già
+timer_delete(): se ritorna 1, il temporizzatore è stato già
rimosso. Se 0, significa (in questo caso) che il temporizzatore è in
esecuzione, quindi possiamo fare come segue::
@@ -1012,7 +1012,7 @@ rimosso. Se 0, significa (in questo caso
while (list) {
struct foo *next = list->next;
- if (!del_timer(&list->timer)) {
+ if (!timer_delete(&list->timer)) {
/* Give timer a chance to delete this */
spin_unlock_bh(&list_lock);
goto retry;
@@ -1026,7 +1026,7 @@ rimosso. Se 0, significa (in questo caso
Un altro problema è l'eliminazione dei temporizzatori che si riavviano
da soli (chiamando add_timer() alla fine della loro esecuzione).
Dato che questo è un problema abbastanza comune con una propensione
-alle corse critiche, dovreste usare del_timer_sync()
+alle corse critiche, dovreste usare timer_delete_sync()
(``include/linux/timer.h``) per gestire questo caso.
Velocità della sincronizzazione
@@ -1372,7 +1372,7 @@ contesto, o trattenendo un qualsiasi *lo
- kfree()
-- add_timer() e del_timer()
+- add_timer() e timer_delete()
Riferimento per l'API dei Mutex
===============================
--- a/Documentation/translations/zh_CN/core-api/local_ops.rst
+++ b/Documentation/translations/zh_CN/core-api/local_ops.rst
@@ -185,7 +185,7 @@ UP之间没有不同的行为，在你�
static void __exit test_exit(void)
{
- del_timer_sync(&test_timer);
+ timer_delete_sync(&test_timer);
}
module_init(test_init);
Powered by blists - more mailing lists