[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221123091529.22018-1-wei.sheng.goh@intel.com>
Date: Wed, 23 Nov 2022 17:15:29 +0800
From: "Goh, Wei Sheng" <wei.sheng.goh@...el.com>
To: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Ong Boon Leong <boon.leong.ong@...el.com>,
Voon Wei Feng <weifeng.voon@...el.com>,
Tan Tee Min <tee.min.tan@...el.com>,
Ahmad Tarmizi Noor Azura <noor.azura.ahmad.tarmizi@...el.com>,
Looi Hong Aun <hong.aun.looi@...el.com>,
Goh Wei Sheng <wei.sheng.goh@...el.com>
Subject: [PATCH net v3] net: stmmac: Set MAC's flow control register to reflect current settings
Currently, pause frame register GMAC_RX_FLOW_CTRL_RFE is not updated
correctly when 'ethtool -A <IFACE> autoneg off rx off tx off' command
is issued. This fix ensures the flow control change is reflected directly
in the GMAC_RX_FLOW_CTRL_RFE register.
Fixes: 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()")
Cc: <stable@...r.kernel.org> # 5.10.x
Signed-off-by: Goh, Wei Sheng <wei.sheng.goh@...el.com>
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@...el.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
V2 -> V3: Removed value assign for 'flow' in else statement based on review comments
V1 -> V2: Removed needless condition based on review comments
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 ++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 ++++++++++--
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index c25bfecb4a2d..369db308b1dd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -748,6 +748,8 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
if (fc & FLOW_RX) {
pr_debug("\tReceive Flow-Control ON\n");
flow |= GMAC_RX_FLOW_CTRL_RFE;
+ } else {
+ pr_debug("\tReceive Flow-Control OFF\n");
}
writel(flow, ioaddr + GMAC_RX_FLOW_CTRL);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8273e6a175c8..ab7f48f32f5b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1061,8 +1061,16 @@ static void stmmac_mac_link_up(struct phylink_config *config,
ctrl |= priv->hw->link.duplex;
/* Flow Control operation */
- if (tx_pause && rx_pause)
- stmmac_mac_flow_ctrl(priv, duplex);
+ if (rx_pause && tx_pause)
+ priv->flow_ctrl = FLOW_AUTO;
+ else if (rx_pause && !tx_pause)
+ priv->flow_ctrl = FLOW_RX;
+ else if (!rx_pause && tx_pause)
+ priv->flow_ctrl = FLOW_TX;
+ else
+ priv->flow_ctrl = FLOW_OFF;
+
+ stmmac_mac_flow_ctrl(priv, duplex);
if (ctrl != old_ctrl)
writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
--
2.17.1
Powered by blists - more mailing lists