Date:   Thu, 24 Nov 2022 16:15:59 +0100
From:   Benjamin Tissoires <benjamin.tissoires@...hat.com>
To:     Greg KH <gregkh@...uxfoundation.org>,
        Jiri Kosina <jikos@...nel.org>,
        Alexei Starovoitov <ast@...nel.org>,
        Daniel Borkmann <daniel@...earbox.net>,
        Andrii Nakryiko <andrii@...nel.org>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc:     Tero Kristo <tero.kristo@...ux.intel.com>,
        linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
        netdev@...r.kernel.org, bpf@...r.kernel.org,
        Benjamin Tissoires <benjamin.tissoires@...hat.com>
Subject: [RFC hid v1 06/10] selftests: hid: add vmtest.sh

Similar-ish in many points from the script in selftests/bpf, with a few
differences:
- relies on boot2container instead of a plain qemu image (meaning that
  we can take any container in a registry as a base)
- runs in the hid selftest dir, and such uses the test program from there

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@...hat.com>
---
 tools/testing/selftests/hid/.gitignore    |   1 +
 tools/testing/selftests/hid/config.common | 241 +++++++++++++++++++
 tools/testing/selftests/hid/config.x86_64 |   4 +
 tools/testing/selftests/hid/vmtest.sh     | 280 ++++++++++++++++++++++
 4 files changed, 526 insertions(+)
 create mode 100644 tools/testing/selftests/hid/config.common
 create mode 100644 tools/testing/selftests/hid/config.x86_64
 create mode 100755 tools/testing/selftests/hid/vmtest.sh

diff --git a/tools/testing/selftests/hid/.gitignore b/tools/testing/selftests/hid/.gitignore
index a462ca6ab2c0..995af0670f69 100644
--- a/tools/testing/selftests/hid/.gitignore
+++ b/tools/testing/selftests/hid/.gitignore
@@ -2,3 +2,4 @@ bpftool
 *.skel.h
 /tools
 hid_bpf
+results
diff --git a/tools/testing/selftests/hid/config.common b/tools/testing/selftests/hid/config.common
new file mode 100644
index 000000000000..0617275d93cc
--- /dev/null
+++ b/tools/testing/selftests/hid/config.common
@@ -0,0 +1,241 @@
+CONFIG_9P_FS_POSIX_ACL=y
+CONFIG_9P_FS_SECURITY=y
+CONFIG_9P_FS=y
+CONFIG_AUDIT=y
+CONFIG_BINFMT_MISC=y
+CONFIG_BLK_CGROUP_IOLATENCY=y
+CONFIG_BLK_CGROUP=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BONDING=y
+CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
+CONFIG_BOOTTIME_TRACING=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CGROUP_NET_CLASSID=y
+CONFIG_CGROUP_NET_PRIO=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_WRITEBACK=y
+CONFIG_CMA_AREAS=7
+CONFIG_CMA=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPUSETS=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRYPTO_BLAKE2B=y
+CONFIG_CRYPTO_DEV_VIRTIO=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_XXHASH=y
+CONFIG_DCB=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_DEBUG_CREDENTIALS=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEFAULT_FQ_CODEL=y
+CONFIG_DEFAULT_RENO=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DEVTMPFS=y
+CONFIG_DMA_CMA=y
+CONFIG_DNS_RESOLVER=y
+CONFIG_EFI_STUB=y
+CONFIG_EFI=y
+CONFIG_EXPERT=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_FAIL_FUNCTION=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_VESA=y
+CONFIG_FB=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_FONTS=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FUSE_FS=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_GART_IOMMU=y
+CONFIG_GENERIC_PHY=y
+CONFIG_HARDLOCKUP_DETECTOR=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HPET=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_HWPOISON_INJECT=y
+CONFIG_HZ_1000=y
+CONFIG_INET=y
+CONFIG_INTEL_POWERCLAMP=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_NAT=y
+CONFIG_IP6_NF_TARGET_MASQUERADE=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_SEG6_LWTUNNEL=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IRQ_POLL=y
+CONFIG_JUMP_LABEL=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_KEXEC=y
+CONFIG_KPROBES=y
+CONFIG_KSM=y
+CONFIG_LEGACY_VSYSCALL_NONE=y
+CONFIG_LOG_BUF_SHIFT=21
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=0
+CONFIG_LOGO=y
+CONFIG_LSM="selinux,bpf,integrity"
+CONFIG_MAC_PARTITION=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MCORE2=y
+CONFIG_MEMCG=y
+CONFIG_MEMORY_FAILURE=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_MODULES=y
+CONFIG_NAMESPACES=y
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_NET_9P=y
+CONFIG_NET_ACT_BPF=y
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_EMATCH=y
+CONFIG_NETFILTER_NETLINK_LOG=y
+CONFIG_NETFILTER_NETLINK_QUEUE=y
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
+CONFIG_NETFILTER_XT_MATCH_BPF=y
+CONFIG_NETFILTER_XT_MATCH_COMMENT=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
+CONFIG_NETFILTER_XT_NAT=y
+CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_NETLABEL=y
+CONFIG_NET_SCH_DEFAULT=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_NET_TC_SKB_EXT=y
+CONFIG_NET_VRF=y
+CONFIG_NET=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_NAT_MASQUERADE=y
+CONFIG_NF_NAT=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NO_HZ=y
+CONFIG_NR_CPUS=128
+CONFIG_NUMA_BALANCING=y
+CONFIG_NUMA=y
+CONFIG_NVMEM=y
+CONFIG_OSF_PARTITION=y
+CONFIG_OVERLAY_FS_INDEX=y
+CONFIG_OVERLAY_FS_METACOPY=y
+CONFIG_OVERLAY_FS_XINO_AUTO=y
+CONFIG_OVERLAY_FS=y
+CONFIG_PACKET=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PREEMPT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROFILING=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_RC_DEVICES=y
+CONFIG_RC_LOOPBACK=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_SCHED_STACK_END_CHECK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SMP=y
+CONFIG_SOCK_CGROUP_DATA=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_SYNC_FILE=y
+CONFIG_SYSVIPC=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_XACCT=y
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_MD5SIG=y
+CONFIG_TLS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS=y
+CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TUN=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_UNIX=y
+CONFIG_USER_NS=y
+CONFIG_VALIDATE_FS_PARSER=y
+CONFIG_VETH=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_FS=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VLAN_8021Q=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_USER=y
+CONFIG_ZEROPLUS_FF=y
diff --git a/tools/testing/selftests/hid/config.x86_64 b/tools/testing/selftests/hid/config.x86_64
new file mode 100644
index 000000000000..a8721f403c21
--- /dev/null
+++ b/tools/testing/selftests/hid/config.x86_64
@@ -0,0 +1,4 @@
+CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_X86_CPUID=y
+CONFIG_X86_MSR=y
+CONFIG_X86_POWERNOW_K8=y
diff --git a/tools/testing/selftests/hid/vmtest.sh b/tools/testing/selftests/hid/vmtest.sh
new file mode 100755
index 000000000000..f124cf6b0d0f
--- /dev/null
+++ b/tools/testing/selftests/hid/vmtest.sh
@@ -0,0 +1,280 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+set -u
+set -e
+
+# This script currently only works for x86_64
+ARCH="$(uname -m)"
+case "${ARCH}" in
+x86_64)
+	QEMU_BINARY=qemu-system-x86_64
+	BZIMAGE="arch/x86/boot/bzImage"
+	;;
+*)
+	echo "Unsupported architecture"
+	exit 1
+	;;
+esac
+DEFAULT_COMMAND="./hid_bpf"
+OUTPUT_DIR="$PWD/results"
+KCONFIG_REL_PATHS=("tools/testing/selftests/hid/config" "tools/testing/selftests/hid/config.common" "tools/testing/selftests/hid/config.${ARCH}")
+B2C_URL="https://gitlab.freedesktop.org/mupuf/boot2container/-/raw/master/vm2c.py"
+NUM_COMPILE_JOBS="$(nproc)"
+LOG_FILE_BASE="$(date +"hid_selftests.%Y-%m-%d_%H-%M-%S")"
+LOG_FILE="${LOG_FILE_BASE}.log"
+EXIT_STATUS_FILE="${LOG_FILE_BASE}.exit_status"
+
+usage()
+{
+	cat <<EOF
+Usage: $0 [-i] [-s] [-d <output_dir>] -- [<command>]
+
+<command> is the command you would normally run when you are in
+tools/testing/selftests/bpf. e.g:
+
+	$0 -- ./hid_bpf
+
+If no command is specified and a debug shell (-s) is not requested,
+"${DEFAULT_COMMAND}" will be run by default.
+
+If you build your kernel using KBUILD_OUTPUT= or O= options, these
+can be passed as environment variables to the script:
+
+  O=<kernel_build_path> $0 -- ./hid_bpf
+
+or
+
+  KBUILD_OUTPUT=<kernel_build_path> $0 -- ./hid_bpf
+
+Options:
+
+	-u)		Update the boot2container script to a newer version.
+	-d)		Update the output directory (default: ${OUTPUT_DIR})
+	-j)		Number of jobs for compilation, similar to -j in make
+			(default: ${NUM_COMPILE_JOBS})
+	-s)		Instead of powering off the VM, start an interactive
+			shell. If <command> is specified, the shell runs after
+			the command finishes executing
+EOF
+}
+
+download()
+{
+	local file="$1"
+
+	echo "Downloading $file..." >&2
+	curl -Lsf "$file" -o "${@:2}"
+}
+
+recompile_kernel()
+{
+	local kernel_checkout="$1"
+	local make_command="$2"
+
+	cd "${kernel_checkout}"
+
+	${make_command} olddefconfig
+	${make_command}
+}
+
+update_selftests()
+{
+	local kernel_checkout="$1"
+	local selftests_dir="${kernel_checkout}/tools/testing/selftests/hid"
+
+	cd "${selftests_dir}"
+	${make_command}
+}
+
+run_vm()
+{
+	local b2c="$1"
+	local kernel_bzimage="$2"
+	local command="$3"
+	local post_command=""
+
+	if ! which "${QEMU_BINARY}" &> /dev/null; then
+		cat <<EOF
+Could not find ${QEMU_BINARY}
+Please install qemu or set the QEMU_BINARY environment variable.
+EOF
+		exit 1
+	fi
+
+	# alpine (used in post-container requires the PATH to have /bin
+	export PATH=$PATH:/bin
+
+	if [[ "${debug_shell}" != "yes" ]]
+	then
+		touch ${OUTPUT_DIR}/${LOG_FILE}
+		command="set -o pipefail ; ${command} 2>&1 | tee ${OUTPUT_DIR}/${LOG_FILE}"
+		post_command="cat ${OUTPUT_DIR}/${LOG_FILE}"
+	fi
+
+	set +e
+	$b2c --command "${command}" \
+	     --kernel ${kernel_bzimage} \
+	     --workdir ${OUTPUT_DIR} \
+	     --image registry.fedoraproject.org/fedora:36
+
+	echo $? > ${OUTPUT_DIR}/${EXIT_STATUS_FILE}
+
+	set -e
+
+	${post_command}
+}
+
+is_rel_path()
+{
+	local path="$1"
+
+	[[ ${path:0:1} != "/" ]]
+}
+
+do_update_kconfig()
+{
+	local kernel_checkout="$1"
+	local kconfig_file="$2"
+
+	rm -f "$kconfig_file" 2> /dev/null
+
+	for config in "${KCONFIG_REL_PATHS[@]}"; do
+		local kconfig_src="${kernel_checkout}/${config}"
+		cat "$kconfig_src" >> "$kconfig_file"
+	done
+}
+
+update_kconfig()
+{
+	local kernel_checkout="$1"
+	local kconfig_file="$2"
+
+	if [[ -f "${kconfig_file}" ]]; then
+		local local_modified="$(stat -c %Y "${kconfig_file}")"
+
+		for config in "${KCONFIG_REL_PATHS[@]}"; do
+			local kconfig_src="${kernel_checkout}/${config}"
+			local src_modified="$(stat -c %Y "${kconfig_src}")"
+			# Only update the config if it has been updated after the
+			# previously cached config was created. This avoids
+			# unnecessarily compiling the kernel and selftests.
+			if [[ "${src_modified}" -gt "${local_modified}" ]]; then
+				do_update_kconfig "$kernel_checkout" "$kconfig_file"
+				# Once we have found one outdated configuration
+				# there is no need to check other ones.
+				break
+			fi
+		done
+	else
+		do_update_kconfig "$kernel_checkout" "$kconfig_file"
+	fi
+}
+
+main()
+{
+	local script_dir="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)"
+	local kernel_checkout=$(realpath "${script_dir}"/../../../../)
+	# By default the script searches for the kernel in the checkout directory but
+	# it also obeys environment variables O= and KBUILD_OUTPUT=
+	local kernel_bzimage="${kernel_checkout}/${BZIMAGE}"
+	local command="${DEFAULT_COMMAND}"
+	local update_b2c="no"
+	local debug_shell="no"
+
+	while getopts ':hsud:j:' opt; do
+		case ${opt} in
+		u)
+			update_b2c="yes"
+			;;
+		d)
+			OUTPUT_DIR="$OPTARG"
+			;;
+		j)
+			NUM_COMPILE_JOBS="$OPTARG"
+			;;
+		s)
+			command="/bin/sh"
+			debug_shell="yes"
+			;;
+		h)
+			usage
+			exit 0
+			;;
+		\? )
+			echo "Invalid Option: -$OPTARG"
+			usage
+			exit 1
+			;;
+		: )
+			echo "Invalid Option: -$OPTARG requires an argument"
+			usage
+			exit 1
+			;;
+		esac
+	done
+	shift $((OPTIND -1))
+
+	# trap 'catch "$?"' EXIT
+
+	if [[ "${debug_shell}" == "no" ]]; then
+		if [[ $# -eq 0 ]]; then
+			echo "No command specified, will run ${DEFAULT_COMMAND} in the vm"
+		else
+			command="$@"
+
+			if [[ "${command}" == "/bin/bash" || "${command}" == "bash" ]]
+			then
+				debug_shell="yes"
+			fi
+		fi
+	fi
+
+	local kconfig_file="${OUTPUT_DIR}/latest.config"
+	local make_command="make -j ${NUM_COMPILE_JOBS} KCONFIG_CONFIG=${kconfig_file}"
+
+	# Figure out where the kernel is being built.
+	# O takes precedence over KBUILD_OUTPUT.
+	if [[ "${O:=""}" != "" ]]; then
+		if is_rel_path "${O}"; then
+			O="$(realpath "${PWD}/${O}")"
+		fi
+		kernel_bzimage="${O}/${BZIMAGE}"
+		make_command="${make_command} O=${O}"
+	elif [[ "${KBUILD_OUTPUT:=""}" != "" ]]; then
+		if is_rel_path "${KBUILD_OUTPUT}"; then
+			KBUILD_OUTPUT="$(realpath "${PWD}/${KBUILD_OUTPUT}")"
+		fi
+		kernel_bzimage="${KBUILD_OUTPUT}/${BZIMAGE}"
+		make_command="${make_command} KBUILD_OUTPUT=${KBUILD_OUTPUT}"
+	fi
+
+	local b2c="${OUTPUT_DIR}/vm2c.py"
+
+	echo "Output directory: ${OUTPUT_DIR}"
+
+	mkdir -p "${OUTPUT_DIR}"
+	update_kconfig "${kernel_checkout}" "${kconfig_file}"
+
+	recompile_kernel "${kernel_checkout}" "${make_command}"
+
+	if [[ "${update_b2c}" == "no" && ! -f "${b2c}" ]]; then
+		echo "vm2c script not found in ${b2c}"
+		update_b2c="yes"
+	fi
+
+	if [[ "${update_b2c}" == "yes" ]]; then
+		download $B2C_URL $b2c
+		chmod +x $b2c
+	fi
+
+	update_selftests "${kernel_checkout}" "${make_command}"
+	run_vm $b2c "${kernel_bzimage}" "${command}"
+	if [[ "${debug_shell}" != "yes" ]]; then
+		echo "Logs saved in ${OUTPUT_DIR}/${LOG_FILE}"
+	fi
+
+	exit $(cat ${OUTPUT_DIR}/${EXIT_STATUS_FILE})
+}
+
+main "$@"
-- 
2.38.1

Powered by blists - more mailing lists