netdev - Re: [PATCH v2] can: mcba_usb: Fix termination command argument

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221124152735.s6ee6rvhlrbrubeh@pengutronix.de>
Date:   Thu, 24 Nov 2022 16:27:35 +0100
From:   Marc Kleine-Budde <mkl@...gutronix.de>
To:     Yasushi SHOJI <yasushi.shoji@...il.com>
Cc:     Yasushi SHOJI <yashi@...cecubics.com>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, remigiusz.kollataj@...ica.com,
        linux-can@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] can: mcba_usb: Fix termination command argument

On 25.11.2022 00:25:03, Yasushi SHOJI wrote:
> Microchip USB Analyzer can activate the internal termination resistors
> by setting the "termination" option ON, or OFF to to deactivate them.
> As I've observed, both with my oscilloscope and captured USB packets
> below, you must send "0" to turn it ON, and "1" to turn it OFF.
> 
> From the schematics in the user's guide, I can confirm that you must
> drive the CAN_RES signal LOW "0" to activate the resistors.
> 
> Reverse the argument value of usb_msg.termination to fix this.
> 
> These are the two commands sequence, ON then OFF.
> 
> > No.     Time           Source                Destination           Protocol Length Info
> >       1 0.000000       host                  1.3.1                 USB      46     URB_BULK out
> >
> > Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> > USB URB
> > Leftover Capture Data: a80000000000000000000000000000000000a8
> >
> > No.     Time           Source                Destination           Protocol Length Info
> >       2 4.372547       host                  1.3.1                 USB      46     URB_BULK out
> >
> > Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> > USB URB
> > Leftover Capture Data: a80100000000000000000000000000000000a9
> 
> Signed-off-by: Yasushi SHOJI <yashi@...cecubics.com>

Applied to linux-can.

Thanks,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)