netdev - [PATCH net-next 2/3] net: pcs: altera-tse: don't set the speed for 1000BaseX

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 25 Nov 2022 14:18:00 +0100
From:   Maxime Chevallier <maxime.chevallier@...tlin.com>
To:     davem@...emloft.net, Rob Herring <robh+dt@...nel.org>
Cc:     Maxime Chevallier <maxime.chevallier@...tlin.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        thomas.petazzoni@...tlin.com, Andrew Lunn <andrew@...n.ch>,
        Jakub Kicinski <kuba@...nel.org>,
        Eric Dumazet <edumazet@...gle.com>,
        Paolo Abeni <pabeni@...hat.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        linux-arm-kernel@...ts.infradead.org,
        Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        devicetree@...r.kernel.org
Subject: [PATCH net-next 2/3] net: pcs: altera-tse: don't set the speed for 1000BaseX

When disabling the SGMII mode bit, the PCS defaults to 1000BaseX mode.
In that mode, we don't need to set the speed since it's always 1000Mbps.

Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
 drivers/net/pcs/pcs-altera-tse.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/pcs/pcs-altera-tse.c b/drivers/net/pcs/pcs-altera-tse.c
index e86cadc391e8..be65271ff5de 100644
--- a/drivers/net/pcs/pcs-altera-tse.c
+++ b/drivers/net/pcs/pcs-altera-tse.c
@@ -102,7 +102,6 @@ static int alt_tse_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 		if_mode |= PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA;
 	} else if (interface == PHY_INTERFACE_MODE_1000BASEX) {
 		if_mode &= ~(PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA);
-		if_mode |= PCS_IF_MODE_SGMI_SPEED_1000;
 	}
 
 	ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
-- 
2.38.1