[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <e4d1cc88-2064-caa0-c786-41f8720869a4@gmail.com>
Date: Wed, 30 Nov 2022 23:25:23 +0100
From: Heiner Kallweit <hkallweit1@...il.com>
To: Jakub Kicinski <kuba@...nel.org>,
David Miller <davem@...emloft.net>,
Realtek linux nic maintainers <nic_swsd@...ltek.com>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH net-next 0/2] net: add and use
netdev_sw_irq_coalesce_default_on()
There are reports about r8169 not reaching full line speed on certain
systems (e.g. SBC's) with a 2.5Gbps link.
There was a time when hardware interrupt coalescing was enabled per
default, but this was changed due to ASPM-related issues on few systems.
Meanwhile we have sysfs attributes for controlling kind of
"software interrupt coalescing" on the GRO level. However most distros
and users don't know about it. So lets set a conservative default for
both involved parameters. Users can still override the defaults via
sysfs. Don't enable these settings on the fast ethernet chip versions,
they are slow enough.
Even with these conservative setting interrupt load on my 1Gbps test
system reduced significantly.
Follow Jakub's suggestion and put this functionality into net core
so that other MAC drivers can reuse it.
Heiner Kallweit (2):
net: add netdev_sw_irq_coalesce_default_on()
r8169: enable GRO software interrupt coalescing per default
drivers/net/ethernet/realtek/r8169_main.c | 2 ++
include/linux/netdevice.h | 1 +
net/core/dev.c | 16 ++++++++++++++++
3 files changed, 19 insertions(+)
--
2.38.1
Powered by blists - more mailing lists