| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 2 Dec 2022 00:16:43 +0800
From: Jun ASAKA <JunASAKA@...040330.moe>
To: Bitterblue Smith <rtl8821cerfe2@...il.com>, Jes.Sorensen@...il.com
Cc: kvalo@...nel.org, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, linux-wireless@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] wifi: rtl8xxxu: fixing IQK failures for rtl8192eu
On 01/12/2022 11:55 pm, Bitterblue Smith wrote:
> On 01/12/2022 16:55, Jun ASAKA wrote:
>> Fixing "Path A RX IQK failed" and "Path B RX IQK failed"
>> issues for rtl8192eu chips by replacing the arguments with
>> the ones in the updated official driver as shown below.
>> 1. https://github.com/Mange/rtl8192eu-linux-driver
>> 2. vendor driver version: 5.6.4
>>
>> Tested-by: Jun ASAKA <JunASAKA@...040330.moe>
>> Signed-off-by: Jun ASAKA <JunASAKA@...040330.moe>
>> ---
>> v3:
>> - add detailed info about the newer version this patch used.
>> - no functional update.
>> ---
>> .../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 76 +++++++++++++------
>> 1 file changed, 54 insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
>> index b06508d0cd..82346500f2 100644
>> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
>> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
>> @@ -734,6 +734,12 @@ static int rtl8192eu_iqk_path_a(struct rtl8xxxu_priv *priv)
>> */
>> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
>> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00180);
>> +
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0x07f77);
>> +> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>>
>> /* Path A IQK setting */
>> @@ -779,11 +785,16 @@ static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
>> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
>> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
>> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
>> - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173);
>> +
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf1173);
>>
>> /* PA/PAD control by 0x56, and set = 0x0 */
>> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980);
>> - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x511e0);
>>
>> /* Enter IQK mode */
>> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>> @@ -798,14 +809,14 @@ static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
>> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
>> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
>>
>> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f);
>> - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160c1f);
>> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x8216031f);
>> + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x6816031f);
>>
>> /* LO calibration setting */
>> rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
>>
>> /* One shot, path A LOK & IQK */
>> - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
>> + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
>> rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
>>
>> mdelay(10);
>> @@ -836,11 +847,16 @@ static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
>> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
>> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
>> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
>> - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ff2);
>> +
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ff2);
>>
>> /* PA/PAD control by 0x56, and set = 0x0 */
>> rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980);
>> - rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x510e0);
>>
>> /* Enter IQK mode */
>> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>> @@ -854,14 +870,14 @@ static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
>> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
>> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
>>
>> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f);
>> - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f);
>> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821608ff);
>> + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x281608ff);
>>
>> /* LO calibration setting */
>> rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891);
>>
>> /* One shot, path A LOK & IQK */
>> - rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
>> + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
>> rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
>>
>> mdelay(10);
>> @@ -891,22 +907,28 @@ static int rtl8192eu_iqk_path_b(struct rtl8xxxu_priv *priv)
>>
>> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00180);
>> - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>>
>> - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x20000);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0x07f77);
>> +
>> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>>
>> + // rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
>> + // rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>> +
> This commented code is not needed.
>
>> /* Path B IQK setting */
>> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
>> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
>> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c);
>> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
>>
>> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x821403e2);
>> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82140303);
>> rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160000);
>>
>> /* LO calibration setting */
>> - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00492911);
>> + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
>>
>> /* One shot, path A LOK & IQK */
>> rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
>> @@ -942,11 +964,16 @@ static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
>> - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf117b);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf1173);
>> +
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
>> + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173);
>>
>> /* PA/PAD control by 0x56, and set = 0x0 */
>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980);
>> - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x511e0);
>>
>> /* Enter IQK mode */
>> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>> @@ -961,8 +988,8 @@ static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
>> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c);
>> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
>>
>> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82160c1f);
>> - rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160c1f);
>> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x8216031f);
>> + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x6816031f);
>>
>> /* LO calibration setting */
>> rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
>> @@ -1002,11 +1029,16 @@ static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
>> - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ffa);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ff2);
>> +
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ff2);
> These four lines you added here should be using RF_A.
>
>>
>> /* PA/PAD control by 0x56, and set = 0x0 */
>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980);
>> - rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000);
>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x510e0);
>>
>> /* Enter IQK mode */
>> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>> @@ -1020,8 +1052,8 @@ static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv)
>> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
>> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x18008c1c);
>>
>> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f);
>> - rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f);
>> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821608ff);
>> + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x281608ff);
>>
>> /* LO calibration setting */
>> rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891);
> The rest of your changes look okay to me.
Thanks for your review. I just issued a v4 patch, please take a look,
thanks.
Jun ASAKA.
Powered by blists - more mailing lists