[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221205194845.2131161-1-vladimir.oltean@nxp.com>
Date: Mon, 5 Dec 2022 21:48:45 +0200
From: Vladimir Oltean <vladimir.oltean@....com>
To: netdev@...r.kernel.org
Cc: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Marek BehĂșn <kabel@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Russell King <linux@...linux.org.uk>,
Tim Harvey <tharvey@...eworks.com>
Subject: [PATCH net] net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
The ethernet-controller dt-schema, mostly pushed forward by Linux, has
the "internal" PHY mode for denoting MAC connections to an internal PHY.
U-Boot may provide device tree blobs where this phy-mode is specified,
so make the Linux driver accept them.
It appears that the current behavior with phy-mode = "internal" was
introduced when mv88e6xxx started reporting supported_interfaces to
phylink. Prior to that, I don't think it would have any issues accepting
this phy-mode.
Fixes: d4ebf12bcec4 ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities")
Link: https://lore.kernel.org/linux-arm-kernel/20221205172709.kglithpbhdbsakvd@skbuf/T/
Reported-by: Tim Harvey <tharvey@...eworks.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
drivers/net/dsa/mv88e6xxx/chip.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index ccfa4751d3b7..ba4fff8690aa 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -833,10 +833,13 @@ static void mv88e6xxx_get_caps(struct dsa_switch *ds, int port,
chip->info->ops->phylink_get_caps(chip, port, config);
- /* Internal ports need GMII for PHYLIB */
- if (mv88e6xxx_phy_is_internal(ds, port))
+ if (mv88e6xxx_phy_is_internal(ds, port)) {
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ /* Internal ports with no phy-mode need GMII for PHYLIB */
__set_bit(PHY_INTERFACE_MODE_GMII,
config->supported_interfaces);
+ }
}
static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
--
2.34.1
Powered by blists - more mailing lists