[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221206114035.66260-1-mengyuanlou@net-swift.com>
Date: Tue, 6 Dec 2022 19:40:35 +0800
From: Mengyuan Lou <mengyuanlou@...-swift.com>
To: netdev@...r.kernel.org
Cc: jiawenwu@...stnetic.com, Mengyuan Lou <mengyuanlou@...-swift.com>
Subject: [PATCH net-next v2] net: ngbe: Add ngbe mdio bus driver.
Add mdio bus register for ngbe.
The internal phy and external phy need to be handled separately.
Add phy changed event detection.
Signed-off-by: Mengyuan Lou <mengyuanlou@...-swift.com>
---
Change log:
v2: address comments:
Andrew Lunn: https://lore.kernel.org/netdev/Y4p0dQWijzQMlBmW@lunn.ch/
drivers/net/ethernet/wangxun/Kconfig | 1 +
drivers/net/ethernet/wangxun/libwx/wx_type.h | 4 +
drivers/net/ethernet/wangxun/ngbe/Makefile | 2 +-
drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c | 23 +-
drivers/net/ethernet/wangxun/ngbe/ngbe_main.c | 88 +++---
drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c | 264 ++++++++++++++++++
drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h | 12 +
drivers/net/ethernet/wangxun/ngbe/ngbe_type.h | 52 ++--
8 files changed, 379 insertions(+), 67 deletions(-)
create mode 100644 drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
create mode 100644 drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h
diff --git a/drivers/net/ethernet/wangxun/Kconfig b/drivers/net/ethernet/wangxun/Kconfig
index 86310588c6c1..0922beac3ec0 100644
--- a/drivers/net/ethernet/wangxun/Kconfig
+++ b/drivers/net/ethernet/wangxun/Kconfig
@@ -25,6 +25,7 @@ config NGBE
tristate "Wangxun(R) GbE PCI Express adapters support"
depends on PCI
select LIBWX
+ select PHYLIB
help
This driver supports Wangxun(R) GbE PCI Express family of
adapters.
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h
index 1cbeef8230bf..3908f64ae9e7 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_type.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h
@@ -133,11 +133,15 @@
/************************************* ETH MAC *****************************/
#define WX_MAC_TX_CFG 0x11000
#define WX_MAC_TX_CFG_TE BIT(0)
+#define WX_MAC_TX_CFG_SPEED_MASK GENMASK(30, 29)
+#define WX_MAC_TX_CFG_SPEED_10G (0x0 << 29)
+#define WX_MAC_TX_CFG_SPEED_1G (0x3 << 29)
#define WX_MAC_RX_CFG 0x11004
#define WX_MAC_RX_CFG_RE BIT(0)
#define WX_MAC_RX_CFG_JE BIT(8)
#define WX_MAC_PKT_FLT 0x11008
#define WX_MAC_PKT_FLT_PR BIT(0) /* promiscuous mode */
+#define WX_MAC_WDG_TIMEOUT 0x1100C
#define WX_MAC_RX_FLOW_CTRL 0x11090
#define WX_MAC_RX_FLOW_CTRL_RFE BIT(0) /* receive fc enable */
#define WX_MMC_CONTROL 0x11800
diff --git a/drivers/net/ethernet/wangxun/ngbe/Makefile b/drivers/net/ethernet/wangxun/ngbe/Makefile
index 391c2cbc1bb4..50fdca87d2a5 100644
--- a/drivers/net/ethernet/wangxun/ngbe/Makefile
+++ b/drivers/net/ethernet/wangxun/ngbe/Makefile
@@ -6,4 +6,4 @@
obj-$(CONFIG_NGBE) += ngbe.o
-ngbe-objs := ngbe_main.o ngbe_hw.o
+ngbe-objs := ngbe_main.o ngbe_hw.o ngbe_mdio.o
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c
index 0e3923b3737e..a3047801bcee 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c
@@ -64,15 +64,24 @@ static int ngbe_reset_misc(struct ngbe_hw *hw)
int ngbe_reset_hw(struct ngbe_hw *hw)
{
struct wx_hw *wxhw = &hw->wxhw;
- int status = 0;
- u32 reset = 0;
+ u32 val = 0;
+ int ret = 0;
/* Call adapter stop to disable tx/rx and clear interrupts */
- status = wx_stop_adapter(wxhw);
- if (status != 0)
- return status;
- reset = WX_MIS_RST_LAN_RST(wxhw->bus.func);
- wr32(wxhw, WX_MIS_RST, reset | rd32(wxhw, WX_MIS_RST));
+ ret = wx_stop_adapter(wxhw);
+ if (ret != 0)
+ return ret;
+
+ if (hw->mac_type != ngbe_mac_type_mdi) {
+ val = WX_MIS_RST_LAN_RST(wxhw->bus.func);
+ wr32(wxhw, WX_MIS_RST, val | rd32(wxhw, WX_MIS_RST));
+
+ ret = read_poll_timeout(rd32, val,
+ !(val & (BIT(9) << wxhw->bus.func)), 1000,
+ 100000, false, wxhw, 0x10028);
+ if (ret)
+ wx_dbg(wxhw, "Lan reset exceed s maximum times.\n");
+ }
ngbe_reset_misc(hw);
/* Store the permanent mac address */
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
index f0b24366da18..059cef619beb 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
@@ -9,10 +9,12 @@
#include <linux/aer.h>
#include <linux/etherdevice.h>
#include <net/ip.h>
+#include <linux/phy.h>
#include "../libwx/wx_type.h"
#include "../libwx/wx_hw.h"
#include "ngbe_type.h"
+#include "ngbe_mdio.h"
#include "ngbe_hw.h"
#include "ngbe.h"
char ngbe_driver_name[] = "ngbe";
@@ -61,46 +63,17 @@ static void ngbe_init_type_code(struct ngbe_hw *hw)
int wol_mask = 0, ncsi_mask = 0;
struct wx_hw *wxhw = &hw->wxhw;
u16 type_mask = 0;
+ u16 val;
wxhw->mac.type = wx_mac_em;
type_mask = (u16)(wxhw->subsystem_device_id & NGBE_OEM_MASK);
ncsi_mask = wxhw->subsystem_device_id & NGBE_NCSI_MASK;
wol_mask = wxhw->subsystem_device_id & NGBE_WOL_MASK;
- switch (type_mask) {
- case NGBE_SUBID_M88E1512_SFP:
- case NGBE_SUBID_LY_M88E1512_SFP:
- hw->phy.type = ngbe_phy_m88e1512_sfi;
- break;
- case NGBE_SUBID_M88E1512_RJ45:
- hw->phy.type = ngbe_phy_m88e1512;
- break;
- case NGBE_SUBID_M88E1512_MIX:
- hw->phy.type = ngbe_phy_m88e1512_unknown;
- break;
- case NGBE_SUBID_YT8521S_SFP:
- case NGBE_SUBID_YT8521S_SFP_GPIO:
- case NGBE_SUBID_LY_YT8521S_SFP:
- hw->phy.type = ngbe_phy_yt8521s_sfi;
- break;
- case NGBE_SUBID_INTERNAL_YT8521S_SFP:
- case NGBE_SUBID_INTERNAL_YT8521S_SFP_GPIO:
- hw->phy.type = ngbe_phy_internal_yt8521s_sfi;
- break;
- case NGBE_SUBID_RGMII_FPGA:
- case NGBE_SUBID_OCP_CARD:
- fallthrough;
- default:
- hw->phy.type = ngbe_phy_internal;
- break;
- }
-
- if (hw->phy.type == ngbe_phy_internal ||
- hw->phy.type == ngbe_phy_internal_yt8521s_sfi)
- hw->mac_type = ngbe_mac_type_mdi;
- else
- hw->mac_type = ngbe_mac_type_rgmii;
-
+ val = rd32(&hw->wxhw, NGBE_CFG_PORT_ST);
+ hw->mac_type = (val & BIT(7)) >> 7 ?
+ ngbe_mac_type_rgmii :
+ ngbe_mac_type_mdi;
hw->wol_enabled = (wol_mask == NGBE_WOL_SUP) ? 1 : 0;
hw->ncsi_enabled = (ncsi_mask == NGBE_NCSI_MASK ||
type_mask == NGBE_SUBID_OCP_CARD) ? 1 : 0;
@@ -203,12 +176,39 @@ static int ngbe_sw_init(struct ngbe_adapter *adapter)
return 0;
}
+static void ngbe_disable_device(struct ngbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ngbe_hw *hw = &adapter->hw;
+
+ wx_disable_pcie_master(&hw->wxhw);
+ /* disable receives */
+ wx_disable_rx(&hw->wxhw);
+ netif_tx_disable(netdev);
+ if (hw->gpio_ctrl)
+ /* gpio0 is used to power off control*/
+ wr32(&hw->wxhw, NGBE_GPIO_DR, NGBE_GPIO_DR_0);
+}
+
static void ngbe_down(struct ngbe_adapter *adapter)
{
- netif_carrier_off(adapter->netdev);
- netif_tx_disable(adapter->netdev);
+ struct ngbe_hw *hw = &adapter->hw;
+
+ phy_stop(hw->phydev);
+ ngbe_disable_device(adapter);
};
+static void ngbe_up(struct ngbe_adapter *adapter)
+{
+ struct ngbe_hw *hw = &adapter->hw;
+
+ pci_set_master(adapter->pdev);
+ if (hw->gpio_ctrl)
+ /* gpio0 is used to power on control*/
+ wr32(&hw->wxhw, NGBE_GPIO_DR, 0);
+ phy_start(hw->phydev);
+}
+
/**
* ngbe_open - Called when a network interface is made active
* @netdev: network interface device structure
@@ -223,8 +223,13 @@ static int ngbe_open(struct net_device *netdev)
struct ngbe_adapter *adapter = netdev_priv(netdev);
struct ngbe_hw *hw = &adapter->hw;
struct wx_hw *wxhw = &hw->wxhw;
+ int ret;
wx_control_hw(wxhw, true);
+ ret = ngbe_phy_connect(hw);
+ if (ret)
+ return ret;
+ ngbe_up(adapter);
return 0;
}
@@ -243,9 +248,11 @@ static int ngbe_open(struct net_device *netdev)
static int ngbe_close(struct net_device *netdev)
{
struct ngbe_adapter *adapter = netdev_priv(netdev);
+ struct ngbe_hw *hw = &adapter->hw;
ngbe_down(adapter);
- wx_control_hw(&adapter->hw.wxhw, false);
+ phy_disconnect(hw->phydev);
+ wx_control_hw(&hw->wxhw, false);
return 0;
}
@@ -471,6 +478,11 @@ static int ngbe_probe(struct pci_dev *pdev,
eth_hw_addr_set(netdev, wxhw->mac.perm_addr);
ngbe_mac_set_default_filter(adapter, wxhw->mac.perm_addr);
+ /* phy Interface Configuration */
+ err = ngbe_mdio_init(hw);
+ if (err)
+ goto err_free_mac_table;
+
err = register_netdev(netdev);
if (err)
goto err_register;
@@ -479,7 +491,7 @@ static int ngbe_probe(struct pci_dev *pdev,
netif_info(adapter, probe, netdev,
"PHY: %s, PBA No: Wang Xun GbE Family Controller\n",
- hw->phy.type == ngbe_phy_internal ? "Internal" : "External");
+ hw->mac_type == ngbe_mac_type_mdi ? "Internal" : "External");
netif_info(adapter, probe, netdev, "%pM\n", netdev->dev_addr);
return 0;
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
new file mode 100644
index 000000000000..139623f4845a
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. */
+
+#include <linux/ethtool.h>
+#include <linux/iopoll.h>
+#include <linux/pci.h>
+#include <linux/phy.h>
+
+#include "../libwx/wx_type.h"
+#include "../libwx/wx_hw.h"
+#include "ngbe_type.h"
+#include "ngbe_mdio.h"
+#include "ngbe.h"
+
+static int ngbe_phy_read_reg_internal(struct mii_bus *bus, int phy_addr, int regnum)
+{
+ struct ngbe_hw *hw = bus->priv;
+
+ if (regnum & MII_ADDR_C45)
+ return -EOPNOTSUPP;
+ return (u16)rd32(&hw->wxhw, NGBE_PHY_CONFIG(regnum));
+}
+
+static int ngbe_phy_write_reg_internal(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
+{
+ struct ngbe_hw *hw = bus->priv;
+
+ if (regnum & MII_ADDR_C45)
+ return -EOPNOTSUPP;
+ wr32(&hw->wxhw, NGBE_PHY_CONFIG(regnum), value);
+ return 0;
+}
+
+static int ngbe_phy_read_reg_mdi(struct mii_bus *bus, int phy_addr, int regnum)
+{
+ u32 command = 0, device_type = 0;
+ struct ngbe_hw *hw = bus->priv;
+ struct wx_hw *wxhw = &hw->wxhw;
+ u32 phy_data = 0;
+ u32 val = 0;
+ int ret = 0;
+
+ if (regnum & MII_ADDR_C45) {
+ wr32(wxhw, NGBE_MDIO_CLAUSE_SELECT, 0x0);
+ /* setup and write the address cycle command */
+ command = NGBE_MSCA_RA(mdiobus_c45_regad(regnum)) |
+ NGBE_MSCA_PA(phy_addr) |
+ NGBE_MSCA_DA(mdiobus_c45_devad(regnum));
+ } else {
+ wr32(wxhw, NGBE_MDIO_CLAUSE_SELECT, 0xF);
+ /* setup and write the address cycle command */
+ command = NGBE_MSCA_RA(regnum) |
+ NGBE_MSCA_PA(phy_addr) |
+ NGBE_MSCA_DA(device_type);
+ }
+ wr32(wxhw, NGBE_MSCA, command);
+ command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
+ NGBE_MSCC_BUSY |
+ NGBE_MDIO_CLK(6);
+ wr32(wxhw, NGBE_MSCC, command);
+
+ /* wait to complete */
+ ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
+ 100000, false, wxhw, NGBE_MSCC);
+
+ if (ret)
+ wx_dbg(wxhw, "PHY address command did not complete.\n");
+
+ /* read data from MSCC */
+ phy_data = 0xffff & rd32(wxhw, NGBE_MSCC);
+
+ return phy_data;
+}
+
+static int ngbe_phy_write_reg_mdi(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
+{
+ u32 command = 0, device_type = 0;
+ struct ngbe_hw *hw = bus->priv;
+ struct wx_hw *wxhw = &hw->wxhw;
+ int ret = 0;
+ u16 val = 0;
+
+ if (regnum & MII_ADDR_C45) {
+ wr32(wxhw, NGBE_MDIO_CLAUSE_SELECT, 0x0);
+ /* setup and write the address cycle command */
+ command = NGBE_MSCA_RA(mdiobus_c45_regad(regnum)) |
+ NGBE_MSCA_PA(phy_addr) |
+ NGBE_MSCA_DA(mdiobus_c45_devad(regnum));
+ } else {
+ wr32(wxhw, NGBE_MDIO_CLAUSE_SELECT, 0xF);
+ /* setup and write the address cycle command */
+ command = NGBE_MSCA_RA(regnum) |
+ NGBE_MSCA_PA(phy_addr) |
+ NGBE_MSCA_DA(device_type);
+ }
+ wr32(wxhw, NGBE_MSCA, command);
+ command = value |
+ NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
+ NGBE_MSCC_BUSY |
+ NGBE_MDIO_CLK(6);
+ wr32(wxhw, NGBE_MSCC, command);
+
+ /* wait to complete */
+ ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
+ 100000, false, wxhw, NGBE_MSCC);
+
+ if (ret)
+ wx_dbg(wxhw, "PHY address command did not complete.\n");
+
+ return ret;
+}
+
+static int ngbe_phy_read_reg(struct mii_bus *bus, int phy_addr, int regnum)
+{
+ struct ngbe_hw *hw = bus->priv;
+ u16 phy_data = 0;
+
+ if (hw->mac_type == ngbe_mac_type_mdi)
+ phy_data = ngbe_phy_read_reg_internal(bus, phy_addr, regnum);
+ else if (hw->mac_type == ngbe_mac_type_rgmii)
+ phy_data = ngbe_phy_read_reg_mdi(bus, phy_addr, regnum);
+
+ return phy_data;
+}
+
+static int ngbe_phy_write_reg(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
+{
+ struct ngbe_hw *hw = bus->priv;
+ int ret = 0;
+
+ if (hw->mac_type == ngbe_mac_type_mdi)
+ ret = ngbe_phy_write_reg_internal(bus, phy_addr, regnum, value);
+ else if (hw->mac_type == ngbe_mac_type_rgmii)
+ ret = ngbe_phy_write_reg_mdi(bus, phy_addr, regnum, value);
+ return ret;
+}
+
+static void ngbe_handle_link_change(struct net_device *dev)
+{
+ struct ngbe_adapter *adapter = netdev_priv(dev);
+ struct ngbe_hw *hw = &adapter->hw;
+ struct wx_hw *wxhw = &hw->wxhw;
+ u32 lan_speed = 2, reg;
+ bool changed = false;
+
+ struct phy_device *phydev = hw->phydev;
+
+ if (hw->link != phydev->link ||
+ hw->speed != phydev->speed ||
+ hw->duplex != phydev->duplex) {
+ changed = true;
+ hw->link = phydev->link;
+ hw->speed = phydev->speed;
+ hw->duplex = phydev->duplex;
+ }
+
+ if (!changed)
+ return;
+
+ switch (phydev->speed) {
+ case SPEED_1000:
+ lan_speed = 2;
+ break;
+ case SPEED_100:
+ lan_speed = 1;
+ break;
+ case SPEED_10:
+ lan_speed = 0;
+ break;
+ default:
+ break;
+ }
+ wr32m(wxhw, NGBE_CFG_LAN_SPEED, 0x3, lan_speed);
+
+ if (phydev->link) {
+ if (phydev->speed & (SPEED_1000 | SPEED_100 | SPEED_10)) {
+ reg = rd32(wxhw, WX_MAC_TX_CFG);
+ reg &= ~WX_MAC_TX_CFG_SPEED_MASK;
+ reg |= WX_MAC_TX_CFG_SPEED_1G | WX_MAC_TX_CFG_TE;
+ wr32(wxhw, WX_MAC_TX_CFG, reg);
+ }
+ /* Re configure MAC RX */
+ reg = rd32(wxhw, WX_MAC_RX_CFG);
+ wr32(wxhw, WX_MAC_RX_CFG, reg);
+ wr32(wxhw, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR);
+ reg = rd32(wxhw, WX_MAC_WDG_TIMEOUT);
+ wr32(wxhw, WX_MAC_WDG_TIMEOUT, reg);
+ }
+ phy_print_status(phydev);
+}
+
+int ngbe_phy_connect(struct ngbe_hw *hw)
+{
+ struct ngbe_adapter *adapter = container_of(hw,
+ struct ngbe_adapter,
+ hw);
+ int ret;
+
+ ret = phy_connect_direct(adapter->netdev,
+ hw->phydev,
+ ngbe_handle_link_change,
+ PHY_INTERFACE_MODE_RGMII_ID);
+ if (ret) {
+ wx_err(&hw->wxhw,
+ "PHY connect failed.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ngbe_phy_fixup(struct ngbe_hw *hw)
+{
+ struct phy_device *phydev = hw->phydev;
+ struct ethtool_eee eee;
+
+ if (hw->mac_type != ngbe_mac_type_mdi)
+ return;
+ /* disable EEE, EEE not supported by mac */
+ memset(&eee, 0, sizeof(eee));
+ phy_ethtool_set_eee(phydev, &eee);
+
+ phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
+ phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
+ phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+}
+
+int ngbe_mdio_init(struct ngbe_hw *hw)
+{
+ struct pci_dev *pdev = hw->wxhw.pdev;
+ int ret;
+
+ hw->mii_bus = devm_mdiobus_alloc(&pdev->dev);
+ if (!hw->mii_bus)
+ return -ENOMEM;
+
+ hw->mii_bus->name = "ngbe_mii_bus";
+ hw->mii_bus->read = &ngbe_phy_read_reg;
+ hw->mii_bus->write = &ngbe_phy_write_reg;
+ hw->mii_bus->phy_mask = GENMASK(31, 4);
+ hw->mii_bus->probe_capabilities = MDIOBUS_C22_C45;
+ hw->mii_bus->parent = &pdev->dev;
+ hw->mii_bus->priv = hw;
+
+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "ngbe-%x",
+ (pdev->bus->number << 8) |
+ pdev->devfn);
+
+ ret = devm_mdiobus_register(&pdev->dev, hw->mii_bus);
+ if (ret)
+ return ret;
+
+ hw->phydev = phy_find_first(hw->mii_bus);
+ if (!hw->phydev)
+ return -ENODEV;
+ phy_attached_info(hw->phydev);
+ ngbe_phy_fixup(hw);
+
+ hw->link = 0;
+ hw->speed = 0;
+ hw->duplex = 0;
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h
new file mode 100644
index 000000000000..9095f2183d92
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd.
+ */
+
+#ifndef _NGBE_MDIO_H_
+#define _NGBE_MDIO_H_
+
+int ngbe_phy_connect(struct ngbe_hw *hw);
+int ngbe_mdio_init(struct ngbe_hw *hw);
+#endif /* _NGBE_HW_H_ */
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
index 39f6c03f1a54..a24284f53dbb 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
@@ -63,6 +63,26 @@
/* Media-dependent registers. */
#define NGBE_MDIO_CLAUSE_SELECT 0x11220
+/* mdio access */
+#define NGBE_MSCA 0x11200
+#define NGBE_MSCA_RA(v) ((0xFFFF & (v)))
+#define NGBE_MSCA_PA(v) ((0x1F & (v)) << 16)
+#define NGBE_MSCA_DA(v) ((0x1F & (v)) << 21)
+#define NGBE_MSCC 0x11204
+#define NGBE_MSCC_DATA(v) ((0xFFFF & (v)))
+#define NGBE_MSCC_CMD(v) ((0x3 & (v)) << 16)
+
+enum NGBE_MSCA_CMD_value {
+ NGBE_MSCA_CMD_RSV = 0,
+ NGBE_MSCA_CMD_WRITE,
+ NGBE_MSCA_CMD_POST_READ,
+ NGBE_MSCA_CMD_READ,
+};
+
+#define NGBE_MSCC_SADDR BIT(18)
+#define NGBE_MSCC_BUSY BIT(22)
+#define NGBE_MDIO_CLK(v) ((0x7 & (v)) << 19)
+
/* GPIO Registers */
#define NGBE_GPIO_DR 0x14800
#define NGBE_GPIO_DDR 0x14804
@@ -90,25 +110,10 @@
#define NGBE_FW_CMD_ST_PASS 0x80658383
#define NGBE_FW_CMD_ST_FAIL 0x70657376
-enum ngbe_phy_type {
- ngbe_phy_unknown = 0,
- ngbe_phy_none,
- ngbe_phy_internal,
- ngbe_phy_m88e1512,
- ngbe_phy_m88e1512_sfi,
- ngbe_phy_m88e1512_unknown,
- ngbe_phy_yt8521s,
- ngbe_phy_yt8521s_sfi,
- ngbe_phy_internal_yt8521s_sfi,
- ngbe_phy_generic
-};
+#define NGBE_PHY_CONFIG(reg_offset) (0x14000 + ((reg_offset) * 4))
+#define NGBE_CFG_LAN_SPEED 0x14440
-enum ngbe_media_type {
- ngbe_media_type_unknown = 0,
- ngbe_media_type_fiber,
- ngbe_media_type_copper,
- ngbe_media_type_backplane,
-};
+#define NGBE_CFG_PORT_ST 0x14404
enum ngbe_mac_type {
ngbe_mac_type_unknown = 0,
@@ -117,9 +122,6 @@ enum ngbe_mac_type {
};
struct ngbe_phy_info {
- enum ngbe_phy_type type;
- enum ngbe_media_type media_type;
-
u32 addr;
u32 id;
@@ -132,6 +134,14 @@ struct ngbe_hw {
struct ngbe_phy_info phy;
enum ngbe_mac_type mac_type;
+ /* PHY stuff */
+ struct mii_bus *mii_bus;
+ unsigned int link;
+ int speed;
+ int duplex;
+
+ struct phy_device *phydev;
+
bool wol_enabled;
bool ncsi_enabled;
bool gpio_ctrl;
--
2.38.1
Powered by blists - more mailing lists