netdev - [PATCH net v2 1/1] i40e: Fix the inability to attach XDP program on downed interface

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed,  7 Dec 2022 10:08:42 -0800
From:   Tony Nguyen <anthony.l.nguyen@...el.com>
To:     davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
        edumazet@...gle.com
Cc:     Bartosz Staszewski <bartoszx.staszewski@...el.com>,
        netdev@...r.kernel.org, anthony.l.nguyen@...el.com,
        bjorn@...nel.org, maciej.fijalkowski@...el.com,
        magnus.karlsson@...el.com, ast@...nel.org, daniel@...earbox.net,
        hawk@...nel.org, john.fastabend@...il.com, bpf@...r.kernel.org,
        Mateusz Palczewski <mateusz.palczewski@...el.com>,
        Shwetha Nagaraju <Shwetha.nagaraju@...el.com>
Subject: [PATCH net v2 1/1] i40e: Fix the inability to attach XDP program on downed interface

From: Bartosz Staszewski <bartoszx.staszewski@...el.com>

Whenever trying to load XDP prog on downed interface, function i40e_xdp
was passing vsi->rx_buf_len field to i40e_xdp_setup() which was equal 0.
i40e_open() calls i40e_vsi_configure_rx() which configures that field,
but that only happens when interface is up. When it is down, i40e_open()
is not being called, thus vsi->rx_buf_len is not set.

Solution for this is calculate buffer length in newly created
function - i40e_calculate_vsi_rx_buf_len() that return actual buffer
length. Buffer length is being calculated based on the same rules
applied previously in i40e_vsi_configure_rx() function.

Fixes: 613142b0bb88 ("i40e: Log error for oversized MTU on device")
Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@...el.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@...el.com>
Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@...el.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@...el.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
---
v2:
- Change title and rework commit message
- Dropped, previous, patch 1

v1: https://lore.kernel.org/netdev/20221115000324.3040207-1-anthony.l.nguyen@intel.com/

 drivers/net/ethernet/intel/i40e/i40e_main.c | 42 +++++++++++++++------
 1 file changed, 30 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 6416322d7c18..b8a8098110eb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3693,6 +3693,30 @@ static int i40e_vsi_configure_tx(struct i40e_vsi *vsi)
 	return err;
 }
 
+/**
+ * i40e_calculate_vsi_rx_buf_len - Calculates buffer length
+ *
+ * @vsi: VSI to calculate rx_buf_len from
+ */
+static u16 i40e_calculate_vsi_rx_buf_len(struct i40e_vsi *vsi)
+{
+	u16 ret;
+
+	if (!vsi->netdev || (vsi->back->flags & I40E_FLAG_LEGACY_RX)) {
+		ret = I40E_RXBUFFER_2048;
+#if (PAGE_SIZE < 8192)
+	} else if (!I40E_2K_TOO_SMALL_WITH_PADDING &&
+		   (vsi->netdev->mtu <= ETH_DATA_LEN)) {
+		ret = I40E_RXBUFFER_1536 - NET_IP_ALIGN;
+#endif
+	} else {
+		ret = (PAGE_SIZE < 8192) ? I40E_RXBUFFER_3072 :
+					   I40E_RXBUFFER_2048;
+	}
+
+	return ret;
+}
+
 /**
  * i40e_vsi_configure_rx - Configure the VSI for Rx
  * @vsi: the VSI being configured
@@ -3704,20 +3728,14 @@ static int i40e_vsi_configure_rx(struct i40e_vsi *vsi)
 	int err = 0;
 	u16 i;
 
-	if (!vsi->netdev || (vsi->back->flags & I40E_FLAG_LEGACY_RX)) {
-		vsi->max_frame = I40E_MAX_RXBUFFER;
-		vsi->rx_buf_len = I40E_RXBUFFER_2048;
+	vsi->max_frame = I40E_MAX_RXBUFFER;
+	vsi->rx_buf_len = i40e_calculate_vsi_rx_buf_len(vsi);
+
 #if (PAGE_SIZE < 8192)
-	} else if (!I40E_2K_TOO_SMALL_WITH_PADDING &&
-		   (vsi->netdev->mtu <= ETH_DATA_LEN)) {
+	if (vsi->netdev && !I40E_2K_TOO_SMALL_WITH_PADDING &&
+	    vsi->netdev->mtu <= ETH_DATA_LEN)
 		vsi->max_frame = I40E_RXBUFFER_1536 - NET_IP_ALIGN;
-		vsi->rx_buf_len = I40E_RXBUFFER_1536 - NET_IP_ALIGN;
 #endif
-	} else {
-		vsi->max_frame = I40E_MAX_RXBUFFER;
-		vsi->rx_buf_len = (PAGE_SIZE < 8192) ? I40E_RXBUFFER_3072 :
-						       I40E_RXBUFFER_2048;
-	}
 
 	/* set up individual rings */
 	for (i = 0; i < vsi->num_queue_pairs && !err; i++)
@@ -13282,7 +13300,7 @@ static int i40e_xdp_setup(struct i40e_vsi *vsi, struct bpf_prog *prog,
 	int i;
 
 	/* Don't allow frames that span over multiple buffers */
-	if (frame_size > vsi->rx_buf_len) {
+	if (frame_size > i40e_calculate_vsi_rx_buf_len(vsi)) {
 		NL_SET_ERR_MSG_MOD(extack, "MTU too large to enable XDP");
 		return -EINVAL;
 	}
-- 
2.35.1