[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <2f364567-3598-2d86-ae3d-e0fabad4704a@eikelenboom.it>
Date: Wed, 7 Dec 2022 22:42:45 +0100
From: Sander Eikelenboom <linux@...elenboom.it>
To: Ross Lagerwall <ross.lagerwall@...rix.com>,
Juergen Gross <jgross@...e.com>,
Xen-devel <xen-devel@...ts.xen.org>, Paul Durrant <paul@....org>
Cc: linux-kernel@...r.kernel.org, netdev <netdev@...r.kernel.org>
Subject: Xen + linux 6.1.0-rc8, network to guest VM not working after commit
ad7f402ae4f466647c3a669b8a6f3e5d4271c84a fixing XSA-423
Hi Ross / Juergen,
I just updated my linux kernel to the latest of Linus his tree which included commit ad7f402ae4f466647c3a669b8a6f3e5d4271c84a fixing XSA-423.
Unfortunately when using this kernel I can't SSH anymore into the Xen guest I start, but I don't see any apparent failures either.
A straight revert of the commit ad7f402ae4f466647c3a669b8a6f3e5d4271c84a makes networking function normally again.
I have added some of the logging below, perhaps it at gives some idea off the state around the Xen network front and backend.
Any ideas or a test patch that I could run to shed some more light on what is going on ?
--
Sander
Some of the logging from dom0 dmesg:
[ 149.520585] xen_bridge: port 1(vif1.0) entered blocking state
[ 149.520594] xen_bridge: port 1(vif1.0) entered disabled state
[ 149.520678] device vif1.0 entered promiscuous mode
[ 151.221975] xen-blkback: backend/vbd/1/51712: using 1 queues, protocol 1 (x86_64-abi) persistent grants
[ 151.601458] vif vif-1-0 vif1.0: Guest Rx ready
[ 151.601476] xen_bridge: port 1(vif1.0) entered blocking state
[ 151.601478] xen_bridge: port 1(vif1.0) entered forwarding state
output xenstore-ls regarding vif for the Guest:
vif = ""
1 = ""
0 = ""
bridge = "xen_bridge"
feature-ctrl-ring = "1"
feature-dynamic-multicast-control = "1"
feature-gso-tcpv4 = "1"
feature-gso-tcpv6 = "1"
feature-ipv6-csum-offload = "1"
feature-multicast-control = "1"
feature-rx-copy = "1"
feature-rx-flip = "0"
feature-sg = "1"
feature-split-event-channels = "1"
feature-xdp-headroom = "1"
frontend = "/local/domain/1/device/vif/0"
frontend-id = "1"
handle = "0"
hotplug-status = "connected"
ip = "192.168.1.6"
mac = "00:16:3e:49:0e:fa"
multi-queue-max-queues = "8"
online = "1"
script = "/etc/xen/scripts/vif-bridge"
state = "4"
type = "vif"
vif = ""
0 = ""
backend = "/local/domain/0/backend/vif/1/0"
backend-id = "0"
event-channel-rx = "9"
event-channel-tx = "8"
feature-gso-tcpv4 = "1"
feature-gso-tcpv6 = "1"
feature-ipv6-csum-offload = "1"
feature-rx-notify = "1"
feature-sg = "1"
handle = "0"
mac = "00:16:3e:49:0e:fa"
mtu = "1500"
multi-queue-num-queues = "1"
request-rx-copy = "1"
rx-ring-ref = "524"
state = "4"
trusted = "1"
tx-ring-ref = "523"
xdp-headroom = "0"
ifconfig output for the guest interface on dom0 side:
vif1.0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether fe:ff:ff:ff:ff:ff txqueuelen 32 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 49 bytes 2058 (2.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Powered by blists - more mailing lists