netdev - Re: [PATCH v1 7/7] riscv: dts: starfive: visionfive-v2: Add phy delay

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 9 Dec 2022 09:19:48 +0800
From:   yanhong wang <yanhong.wang@...rfivetech.com>
To:     Conor Dooley <conor@...nel.org>
CC:     <linux-riscv@...ts.infradead.org>, <netdev@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        "Jakub Kicinski" <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Emil Renner Berthing <kernel@...il.dk>,
        Richard Cochran <richardcochran@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Peter Geis <pgwipeout@...il.com>
Subject: Re: [PATCH v1 7/7] riscv: dts: starfive: visionfive-v2: Add phy
 delay_chain configuration



On 2022/12/2 1:49, Conor Dooley wrote:
> On Thu, Dec 01, 2022 at 05:02:42PM +0800, Yanhong Wang wrote:
>> Add phy delay_chain configuration to support motorcomm phy driver for
>> StarFive VisionFive 2 board.
>> 
>> Signed-off-by: Yanhong Wang <yanhong.wang@...rfivetech.com>
>> ---
>>  .../jh7110-starfive-visionfive-v2.dts         | 46 +++++++++++++++++++
>>  1 file changed, 46 insertions(+)
>> 
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
>> index c8946cf3a268..2868ef4c74ef 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts
>> @@ -15,6 +15,8 @@
>>  
>>  	aliases {
>>  		serial0 = &uart0;
>> +		ethernet0=&gmac0;
>> +		ethernet1=&gmac1;
> 
> Please match the whitespace usage of the existing entry.
> 

Will fix in the next version.

>>  	};
>>  
>>  	chosen {
>> @@ -114,3 +116,47 @@
>>  	pinctrl-0 = <&uart0_pins>;
>>  	status = "okay";
>>  };
>> +
>> +&gmac0 {
>> +	status = "okay";
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>> +	phy-handle = <&phy0>;
>> +	status = "okay";
>> +	mdio0 {
> 
> A line of whitespace before the child nodes too please :)
> 

Will fix.

>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		compatible = "snps,dwmac-mdio";
>> +		phy0: ethernet-phy@0 {
>> +			reg = <0>;
>> +			rxc_dly_en = <1>;
>> +			tx_delay_sel_fe = <5>;
>> +			tx_delay_sel = <0xa>;
>> +			tx_inverted_10 = <0x1>;
>> +			tx_inverted_100 = <0x1>;
>> +			tx_inverted_1000 = <0x1>;
>> +		};
>> +	};
>> +};
>> +
>> +&gmac1 {
>> +	status = "okay";
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>> +	phy-handle = <&phy1>;
>> +	status = "okay";
>> +	mdio1 {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		compatible = "snps,dwmac-mdio";
>> +		phy1: ethernet-phy@1 {
>> +			reg = <1>;
>> +			tx_delay_sel_fe = <5>;
>> +			tx_delay_sel = <0>;
>> +			rxc_dly_en = <0>;
>> +			tx_inverted_10 = <0x1>;
>> +			tx_inverted_100 = <0x1>;
>> +			tx_inverted_1000 = <0x0>;
>> +		};
>> +	};
>> +};
>> -- 
>> 2.17.1
>>