| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 12 Dec 2022 08:34:08 -0500
From: George Kennedy <george.kennedy@...cle.com>
To: Eric Dumazet <edumazet@...gle.com>
Cc: Pavan Chebbi <pavan.chebbi@...adcom.com>, davem@...emloft.net,
kuba@...nel.org, pabeni@...hat.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, bpf@...r.kernel.org,
harshit.m.mogalapalli@...cle.com
Subject: Re: [PATCH] net: check for dev pointer being NULL in
dev_hard_header() to avoid GPF
Hi Eric,
On 12/5/2022 10:21 PM, Eric Dumazet wrote:
> On Tue, Dec 6, 2022 at 2:11 AM George Kennedy <george.kennedy@...cle.com> wrote:
>> Hi Eric,
>>
>> More info...
>>
>> On 12/1/2022 11:11 PM, Eric Dumazet wrote:
>>> On Thu, Dec 1, 2022 at 9:44 PM George Kennedy <george.kennedy@...cle.com> wrote:
>>>>
>>>> On 12/1/2022 2:25 PM, Eric Dumazet wrote:
>>>>> On Thu, Dec 1, 2022 at 2:16 PM Pavan Chebbi <pavan.chebbi@...adcom.com> wrote:
>>>>>> On Wed, Nov 30, 2022 at 7:43 PM George Kennedy
>>>>>> <george.kennedy@...cle.com> wrote:
>>>>>>> The dev pointer can be NULL in dev_hard_header(). Add check for dev being
>>>>>>> NULL in dev_hard_header() to avoid GPF.
>>>>>>>
>>>>>>> general protection fault, probably for non-canonical address
>>>>>>> 0xdffffc0000000046: 0000 [#1] PREEMPT SMP KASAN NOPTI
>>>>>>> KASAN: null-ptr-deref in range [0x0000000000000230-0x0000000000000237]
>>>>>>> CPU: 1 PID: 45 Comm: kworker/1:1 Not tainted 6.1.0-rc7+ #2
>>>>>>> Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0+20659+3dcf7c70
>>>>>>> Workqueue: mld mld_ifc_work
>>>>>>> RIP: 0010:macvlan_hard_header (./include/linux/netdevice.h:3057
>>>>>>> (discriminator 4) drivers/net/macvlan.c:594 (discriminator 4))
>>>>>>> RSP: 0018:ffff888103d377d0 EFLAGS: 00010212
>>>>>>> RAX: dffffc0000000000 RBX: ffff88801cf1a000 RCX: 0000000000000000
>>>>>>> RDX: 0000000000000046 RSI: 0000000000000000 RDI: 0000000000000230
>>>>>>> RBP: ffff88801e8ef328 R08: 0000000000000000 R09: 0000000000000060
>>>>>>> R10: 0000000000000000 R11: 0000000000000000 R12: ffff88801f0497c0
>>>>>>> R13: 0000000000000000 R14: ffff888045187c98 R15: 0000000000000060
>>>>>>> FS: 0000000000000000(0000) GS:ffff888106c80000(0000)
>>>>>>> knlGS:0000000000000000
>>>>>>> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>>> CR2: 00007fbf3f1c1840 CR3: 0000000014e36000 CR4: 00000000000006e0
>>>>>>> Call Trace:
>>>>>>> <TASK>
>>>>>>> neigh_connected_output (./include/linux/netdevice.h:3060
>>>>>>> net/core/neighbour.c:1595)
>>>>>>> ip6_finish_output2 (./include/net/neighbour.h:546
>>>>>>> net/ipv6/ip6_output.c:134)
>>>>>>> ip6_finish_output (net/ipv6/ip6_output.c:195 net/ipv6/ip6_output.c:206)
>>>>>>> ip6_output (./include/linux/netfilter.h:291 net/ipv6/ip6_output.c:227)
>>>>>>> NF_HOOK.constprop.0 (./include/net/dst.h:445
>>>>>>> ./include/linux/netfilter.h:302)
>>>>>>> mld_sendpack (net/ipv6/mcast.c:1824)
>>>>>>> mld_send_cr (net/ipv6/mcast.c:2122)
>>>>>>> mld_ifc_work (net/ipv6/mcast.c:2655)
>>>>>>> process_one_work (kernel/workqueue.c:2294)
>>>>>>> worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437)
>>>>>>> kthread (kernel/kthread.c:376)
>>>>>>> ret_from_fork (arch/x86/entry/entry_64.S:312)
>>>>>>> </TASK>
>>>>>>> Modules linked in:
>>>>>>> Dumping ftrace buffer:
>>>>>>> (ftrace buffer empty)
>>>>>>> ---[ end trace 0000000000000000 ]---
>>>>>>>
>>>>>>> Fixes: 0c4e85813d0a ("[NET]: Wrap netdevice hardware header creation.")
>>>>>>> Reported-by: syzkaller <syzkaller@...glegroups.com>
>>>>>>> Signed-off-by: George Kennedy <george.kennedy@...cle.com>
>>>>>>> ---
>>>>>>> include/linux/netdevice.h | 2 +-
>>>>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
>>>>>>> index eddf8ee270e7..9b25a6301fa5 100644
>>>>>>> --- a/include/linux/netdevice.h
>>>>>>> +++ b/include/linux/netdevice.h
>>>>>>> @@ -3054,7 +3054,7 @@ static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
>>>>>>> const void *daddr, const void *saddr,
>>>>>>> unsigned int len)
>>>>>>> {
>>>>>>> - if (!dev->header_ops || !dev->header_ops->create)
>>>>>>> + if (!dev || !dev->header_ops || !dev->header_ops->create)
>>>>> Do you have a repro ?
>>>> See syzkaller repros attached.
>>>>
>>>>> This patch will not prevent a crash later I think.
>>>> The repro ran overnight without failure with the patch applied.
>>> Yes, but the patch is hiding a potential bug that might show up with
>>> other 'repros'
>> The repro fails when these devices are configured (seem like small mtu):
>>
>> 20: vxcan0@...an1: <NOARP,UP,LOWER_UP> mtu 72 qdisc noqueue state UP group default qlen 1000
>> link/can
>> inet 172.20.20.38/24 scope global vxcan0
>> valid_lft forever preferred_lft forever
>> 21: vxcan1@...an0: <NOARP,UP,LOWER_UP> mtu 72 qdisc noqueue state UP group default qlen 1000
>> link/can
>> inet 172.20.20.39/24 scope global vxcan1
>> valid_lft forever preferred_lft forever
>>
>>
>> # diff ../config.fail .config
>> 3325c3325
>> < CONFIG_CAN_VXCAN=y
>> ---
>>> # CONFIG_CAN_VXCAN is not set
>> Thanks,
>> George
> Small MTU has caused numerous issues in the past.
>
> I am pretty sure we miss some READ_ONCE(dev->mtu) and other safety checks.
I have not been able to find the root-cause of the "vxcan" related GPF
yet. What I do know is that for the GPF to occur:
1) CONFIG_CAN_VXCAN=y must be set
2) if CONFIG_CAN_VXCAN=y is set, the GPF will not occur if "vxcan" is
commented out of the C reproducer
C reproducer with "vxcan" commented out (GPF will not occur):
# diff -C 3 repro_macvlan1.c repro_macvlan1_no_vsxcan.c
*** repro_macvlan1.c 2022-12-06 01:03:47.557094544 +0000
--- repro_macvlan1_no_vsxcan.c 2022-12-12 13:15:05.293719169 +0000
***************
*** 884,890 ****
{"vcan", "vcan0"}, {"bond", "bond0"},
{"team", "team0"}, {"dummy", "dummy0"},
{"nlmon", "nlmon0"}, {"caif", "caif0"},
! {"batadv", "batadv0"}, {"vxcan", "vxcan1"},
{"netdevsim", netdevsim}, {"veth", 0},
{"xfrm", "xfrm0"}, {"wireguard", "wg0"},
{"wireguard", "wg1"}, {"wireguard", "wg2"},
--- 884,893 ----
{"vcan", "vcan0"}, {"bond", "bond0"},
{"team", "team0"}, {"dummy", "dummy0"},
{"nlmon", "nlmon0"}, {"caif", "caif0"},
! {"batadv", "batadv0"},
! #ifdef VXCAN
! {"vxcan", "vxcan1"},
! #endif
{"netdevsim", netdevsim}, {"veth", 0},
{"xfrm", "xfrm0"}, {"wireguard", "wg0"},
{"wireguard", "wg1"}, {"wireguard", "wg2"},
***************
*** 923,930 ****
--- 926,935 ----
{"hsr0", 0},
{"dummy0", ETH_ALEN},
{"nlmon0", 0},
+ #ifdef VXCAN
{"vxcan0", 0, true},
{"vxcan1", 0, true},
+ #endif
{"caif0", ETH_ALEN},
{"batadv0", ETH_ALEN},
{netdevsim, ETH_ALEN},
I think for now until the vxcan related GPF root-cause is found, the
"dev NULL check" patch should go in. The "dev NULL check" patch is on
same line as 2 other NULL checks.
Could you try the original C reproducer with kernel with
CONFIG_CAN_VXCAN=y set to see if you have any insights as to the GPF
root-cause?
Thank you,
George
Powered by blists - more mailing lists