lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 21 Dec 2022 16:25:19 +0100 From: Markus Schneider-Pargmann <msp@...libre.com> To: Marc Kleine-Budde <mkl@...gutronix.de>, Chandrasekar Ramakrishnan <rcsekar@...sung.com>, Wolfgang Grandegger <wg@...ndegger.com> Cc: Vincent MAILHOL <mailhol.vincent@...adoo.fr>, linux-can@...r.kernel.org, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, Markus Schneider-Pargmann <msp@...libre.com> Subject: [PATCH 00/18] can: m_can: Optimizations for m_can/tcan part 2 Hi Marc and everyone, this is the second part now. I know it is the merge window right now but I am quite sure this won't be merged immediately anyways, so if you have some time for some comments I would appreciate it. So it is still based on v6.1-rc8 + the patches that got applied. I tried to do as small patches as possible so it is easier to understand. The series changed a lot compared to v1 I sent so I didn't call it v2. There are a lot of new patches as well. The series contains a few small fixes and optimizations at the beginning, then adding coalescing support and at the end removing the restrictions on the number of parallel transmits in flight. Note that the last patch 'Implement transmit submission coalescing' does not perform well for me in a loopback testing setup. However I think it may work well in normal testcases. I attached this mechanism to the tx-frames coalescing option, let me know if this is the correct option. Best, Markus part 1: v1 - https://lore.kernel.org/lkml/20221116205308.2996556-1-msp@baylibre.com v2 - https://lore.kernel.org/lkml/20221206115728.1056014-1-msp@baylibre.com Markus Schneider-Pargmann (18): can: tcan4x5x: Remove reserved register 0x814 from writable table can: tcan4x5x: Check size of mram configuration can: m_can: Remove repeated check for is_peripheral can: m_can: Always acknowledge all interrupts can: m_can: Remove double interrupt enable can: m_can: Disable unused interrupts can: m_can: Keep interrupts enabled during peripheral read can: m_can: Write transmit header and data in one transaction can: m_can: Implement receive coalescing can: m_can: Implement transmit coalescing can: m_can: Add rx coalescing ethtool support can: m_can: Add tx coalescing ethtool support can: m_can: Cache tx putidx can: m_can: Use the workqueue as queue can: m_can: Introduce a tx_fifo_in_flight counter can: m_can: Use tx_fifo_in_flight for netif_queue control can: m_can: Implement BQL can: m_can: Implement transmit submission coalescing drivers/net/can/m_can/m_can.c | 498 ++++++++++++++++++------ drivers/net/can/m_can/m_can.h | 36 +- drivers/net/can/m_can/tcan4x5x-core.c | 5 + drivers/net/can/m_can/tcan4x5x-regmap.c | 1 - 4 files changed, 418 insertions(+), 122 deletions(-) -- 2.38.1
Powered by blists - more mailing lists