netdev - [PATCH net-next 3/3] net: ethernet: renesas: rswitch: Add phy_power

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221226071425.3895915-4-yoshihiro.shimoda.uh@renesas.com>
Date:   Mon, 26 Dec 2022 16:14:25 +0900
From:   Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
To:     linux@...linux.org.uk, andrew@...n.ch, hkallweit1@...il.com,
        davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com
Cc:     netdev@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Subject: [PATCH net-next 3/3] net: ethernet: renesas: rswitch: Add phy_power_{on,off}() calling

Some Ethernet PHYs (like marvell10g) will decide the host interface
mode by the media-side speed. So, the rswitch driver needs to
initialize one of the Ethernet SERDES (r8a779f0-eth-serdes) ports
after linked the Ethernet PHY up. The r8a779f0-eth-serdes driver has
.init() for initializing all ports and .power_on() for initializing
each port. So, add phy_power_{on,off} calling for it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
---
 drivers/net/ethernet/renesas/rswitch.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c
index ca79ee168206..2f335c95f5a8 100644
--- a/drivers/net/ethernet/renesas/rswitch.c
+++ b/drivers/net/ethernet/renesas/rswitch.c
@@ -1180,6 +1180,10 @@ static void rswitch_mac_link_down(struct phylink_config *config,
 				  unsigned int mode,
 				  phy_interface_t interface)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct rswitch_device *rdev = netdev_priv(ndev);
+
+	phy_power_off(rdev->serdes);
 }
 
 static void rswitch_mac_link_up(struct phylink_config *config,
@@ -1187,7 +1191,11 @@ static void rswitch_mac_link_up(struct phylink_config *config,
 				phy_interface_t interface, int speed,
 				int duplex, bool tx_pause, bool rx_pause)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct rswitch_device *rdev = netdev_priv(ndev);
+
 	/* Current hardware cannot change speed at runtime */
+	phy_power_on(rdev->serdes);
 }
 
 static const struct phylink_mac_ops rswitch_phylink_ops = {
-- 
2.25.1