netdev - Re: [PATCH net-next 5/5] drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 5 Jan 2023 11:49:36 +0100
From:   Piergiorgio Beruto <piergiorgio.beruto@...il.com>
To:     Leon Romanovsky <leon@...nel.org>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org, Oleksij Rempel <o.rempel@...gutronix.de>
Subject: Re: [PATCH net-next 5/5] drivers/net/phy: add driver for the onsemi
 NCN26000 10BASE-T1S PHY

On Thu, Jan 05, 2023 at 11:05:48AM +0200, Leon Romanovsky wrote:
> On Wed, Jan 04, 2023 at 03:07:05PM +0100, Piergiorgio Beruto wrote:
> > This patch adds support for the onsemi NCN26000 10BASE-T1S industrial
> > Ethernet PHY. The driver supports Point-to-Multipoint operation without
> > auto-negotiation and with link control handling. The PHY also features
> > PLCA for improving performance in P2MP mode.
> > 
> > Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
> > ---
> >  MAINTAINERS                |   7 ++
> >  drivers/net/phy/Kconfig    |   7 ++
> >  drivers/net/phy/Makefile   |   1 +
> >  drivers/net/phy/ncn26000.c | 171 +++++++++++++++++++++++++++++++++++++
> >  4 files changed, 186 insertions(+)
> >  create mode 100644 drivers/net/phy/ncn26000.c
> 
> <...>
> 
> > +static int ncn26000_config_aneg(struct phy_device *phydev)
> > +{
> > +	// Note: the NCN26000 supports only P2MP link mode. Therefore, AN is not
> > +	// supported. However, this function is invoked by phylib to enable the
> > +	// PHY, regardless of the AN support.
> 
> Please use C-style comments for multi lines blocks.
Fixed.
> 
> > +	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
> > +	phydev->mdix = ETH_TP_MDI;
> > +
> > +	// bring up the link
> 
> Thanks