[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230105010712.10116-2-biao.huang@mediatek.com>
Date: Thu, 5 Jan 2023 09:07:11 +0800
From: Biao Huang <biao.huang@...iatek.com>
To: Andrew Lunn <andrew@...n.ch>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>
CC: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Richard Cochran <richardcochran@...il.com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Biao Huang <biao.huang@...iatek.com>,
<macpaul.lin@...iatek.com>, <netdev@...r.kernel.org>
Subject: [PATCH v8 1/2] stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed
In current driver, MAC will always enable 2ns delay in RGMII mode,
but that's not the correct usage.
Remove the dwmac_fix_mac_speed() in driver, and recommend "rgmii-id"
for phy-mode in device tree.
Fixes: f2d356a6ab71 ("stmmac: dwmac-mediatek: add support for mt8195")
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Biao Huang <biao.huang@...iatek.com>
---
.../ethernet/stmicro/stmmac/dwmac-mediatek.c | 26 -------------------
1 file changed, 26 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index d42e1afb6521..2f7d8e4561d9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -90,7 +90,6 @@ struct mediatek_dwmac_plat_data {
struct mediatek_dwmac_variant {
int (*dwmac_set_phy_interface)(struct mediatek_dwmac_plat_data *plat);
int (*dwmac_set_delay)(struct mediatek_dwmac_plat_data *plat);
- void (*dwmac_fix_mac_speed)(void *priv, unsigned int speed);
/* clock ids to be requested */
const char * const *clk_list;
@@ -443,32 +442,9 @@ static int mt8195_set_delay(struct mediatek_dwmac_plat_data *plat)
return 0;
}
-static void mt8195_fix_mac_speed(void *priv, unsigned int speed)
-{
- struct mediatek_dwmac_plat_data *priv_plat = priv;
-
- if ((phy_interface_mode_is_rgmii(priv_plat->phy_mode))) {
- /* prefer 2ns fixed delay which is controlled by TXC_PHASE_CTRL,
- * when link speed is 1Gbps with RGMII interface,
- * Fall back to delay macro circuit for 10/100Mbps link speed.
- */
- if (speed == SPEED_1000)
- regmap_update_bits(priv_plat->peri_regmap,
- MT8195_PERI_ETH_CTRL0,
- MT8195_RGMII_TXC_PHASE_CTRL |
- MT8195_DLY_GTXC_ENABLE |
- MT8195_DLY_GTXC_INV |
- MT8195_DLY_GTXC_STAGES,
- MT8195_RGMII_TXC_PHASE_CTRL);
- else
- mt8195_set_delay(priv_plat);
- }
-}
-
static const struct mediatek_dwmac_variant mt8195_gmac_variant = {
.dwmac_set_phy_interface = mt8195_set_interface,
.dwmac_set_delay = mt8195_set_delay,
- .dwmac_fix_mac_speed = mt8195_fix_mac_speed,
.clk_list = mt8195_dwmac_clk_l,
.num_clks = ARRAY_SIZE(mt8195_dwmac_clk_l),
.dma_bit_mask = 35,
@@ -619,8 +595,6 @@ static int mediatek_dwmac_common_data(struct platform_device *pdev,
plat->bsp_priv = priv_plat;
plat->init = mediatek_dwmac_init;
plat->clks_config = mediatek_dwmac_clks_config;
- if (priv_plat->variant->dwmac_fix_mac_speed)
- plat->fix_mac_speed = priv_plat->variant->dwmac_fix_mac_speed;
plat->safety_feat_cfg = devm_kzalloc(&pdev->dev,
sizeof(*plat->safety_feat_cfg),
--
2.25.1
Powered by blists - more mailing lists