| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 5 Jan 2023 15:30:23 +0800
From: Frank <Frank.Sae@...or-comm.com>
To: Peter Geis <pgwipeout@...il.com>, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: xiaogang.fan@...or-comm.com, fei.zhang@...or-comm.com,
hua.sun@...or-comm.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, Frank <Frank.Sae@...or-comm.com>,
devicetree@...r.kernel.org
Subject: [PATCH net-next v1 2/3] net: phy: Add dts support for Motorcomm yt8521/yt8531s gigabit ethernet phy
Add dts support for yt8521 and yt8531s. This patch has
been tested on AM335x platform which has one YT8531S interface
card and passed all test cases.
Signed-off-by: Frank <Frank.Sae@...or-comm.com>
---
drivers/net/phy/motorcomm.c | 517 ++++++++++++++++++++++++++++++------
1 file changed, 434 insertions(+), 83 deletions(-)
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 685190db72de..7ebcca374a67 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -10,10 +10,11 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/phy.h>
+#include <linux/of.h>
#define PHY_ID_YT8511 0x0000010a
-#define PHY_ID_YT8521 0x0000011A
-#define PHY_ID_YT8531S 0x4F51E91A
+#define PHY_ID_YT8521 0x0000011a
+#define PHY_ID_YT8531S 0x4f51e91a
/* YT8521/YT8531S Register Overview
* UTP Register space | FIBER Register space
@@ -144,6 +145,16 @@
#define YT8521_ESC1R_SLEEP_SW BIT(15)
#define YT8521_ESC1R_PLLON_SLP BIT(14)
+/* Phy Serdes analog cfg2 Register */
+#define YTPHY_SERDES_ANALOG_CFG2_REG 0xA1
+#define YTPHY_SAC2R_TX_AMPLITUDE_MASK ((0x7 << 13) | (0x7 << 1))
+#define YT8521_SAC2R_TX_AMPLITUDE_LOW ((0x7 << 13) | (0x0 << 1))
+#define YT8521_SAC2R_TX_AMPLITUDE_MIDDLE ((0x5 << 13) | (0x5 << 1))
+#define YT8521_SAC2R_TX_AMPLITUDE_HIGH ((0x3 << 13) | (0x6 << 1))
+#define YT8531S_SAC2R_TX_AMPLITUDE_LOW ((0x0 << 13) | (0x0 << 1))
+#define YT8531S_SAC2R_TX_AMPLITUDE_MIDDLE ((0x0 << 13) | (0x1 << 1))
+#define YT8531S_SAC2R_TX_AMPLITUDE_HIGH ((0x0 << 13) | (0x2 << 1))
+
/* Phy fiber Link timer cfg2 Register */
#define YT8521_LINK_TIMER_CFG2_REG 0xA5
#define YT8521_LTCR_EN_AUTOSEN BIT(15)
@@ -161,6 +172,7 @@
#define YT8521_CHIP_CONFIG_REG 0xA001
#define YT8521_CCR_SW_RST BIT(15)
+#define YT8521_CCR_RXC_DLY_EN BIT(8)
#define YT8521_CCR_MODE_SEL_MASK (BIT(2) | BIT(1) | BIT(0))
#define YT8521_CCR_MODE_UTP_TO_RGMII 0
@@ -178,22 +190,27 @@
#define YT8521_MODE_POLL 0x3
#define YT8521_RGMII_CONFIG1_REG 0xA003
-
+#define YT8521_RC1R_TX_CLK_SEL_MASK BIT(14)
+#define YT8521_RC1R_TX_CLK_SEL_ORIGINAL (0x0 << 14)
+#define YT8521_RC1R_TX_CLK_SEL_INVERTED (0x1 << 14)
/* TX Gig-E Delay is bits 3:0, default 0x1
* TX Fast-E Delay is bits 7:4, default 0xf
* RX Delay is bits 13:10, default 0x0
* Delay = 150ps * N
* On = 2250ps, off = 0ps
*/
-#define YT8521_RC1R_RX_DELAY_MASK (0xF << 10)
-#define YT8521_RC1R_RX_DELAY_EN (0xF << 10)
-#define YT8521_RC1R_RX_DELAY_DIS (0x0 << 10)
-#define YT8521_RC1R_FE_TX_DELAY_MASK (0xF << 4)
-#define YT8521_RC1R_FE_TX_DELAY_EN (0xF << 4)
-#define YT8521_RC1R_FE_TX_DELAY_DIS (0x0 << 4)
-#define YT8521_RC1R_GE_TX_DELAY_MASK (0xF << 0)
-#define YT8521_RC1R_GE_TX_DELAY_EN (0xF << 0)
-#define YT8521_RC1R_GE_TX_DELAY_DIS (0x0 << 0)
+#define YT8521_RC1R_GE_TX_DELAY_BIT (0)
+#define YT8521_RC1R_FE_TX_DELAY_BIT (4)
+#define YT8521_RC1R_RX_DELAY_BIT (10)
+#define YT8521_RC1R_RX_DELAY_MASK (0xF << YT8521_RC1R_RX_DELAY_BIT)
+#define YT8521_RC1R_RX_DELAY_EN (0xF << YT8521_RC1R_RX_DELAY_BIT)
+#define YT8521_RC1R_RX_DELAY_DIS (0x0 << YT8521_RC1R_RX_DELAY_BIT)
+#define YT8521_RC1R_FE_TX_DELAY_MASK (0xF << YT8521_RC1R_FE_TX_DELAY_BIT)
+#define YT8521_RC1R_FE_TX_DELAY_EN (0xF << YT8521_RC1R_FE_TX_DELAY_BIT)
+#define YT8521_RC1R_FE_TX_DELAY_DIS (0x0 << YT8521_RC1R_FE_TX_DELAY_BIT)
+#define YT8521_RC1R_GE_TX_DELAY_MASK (0xF << YT8521_RC1R_GE_TX_DELAY_BIT)
+#define YT8521_RC1R_GE_TX_DELAY_EN (0xF << YT8521_RC1R_GE_TX_DELAY_BIT)
+#define YT8521_RC1R_GE_TX_DELAY_DIS (0x0 << YT8521_RC1R_GE_TX_DELAY_BIT)
#define YTPHY_MISC_CONFIG_REG 0xA006
#define YTPHY_MCR_FIBER_SPEED_MASK BIT(0)
@@ -222,11 +239,33 @@
*/
#define YTPHY_WCR_TYPE_PULSE BIT(0)
-#define YT8531S_SYNCE_CFG_REG 0xA012
-#define YT8531S_SCR_SYNCE_ENABLE BIT(6)
+#define YTPHY_SYNCE_CFG_REG 0xA012
+#define YT8521_SCR_CLK_SRC_MASK (BIT(2) | BIT(1))
+#define YT8521_SCR_CLK_SRC_PLL_125M (0x0 << 1)
+#define YT8521_SCR_CLK_SRC_REF_25M (0x3 << 1)
+#define YT8521_SCR_SYNCE_ENABLE BIT(5)
+#define YT8521_SCR_CLK_FRE_SEL_MASK BIT(3)
+#define YT8521_SCR_CLK_FRE_SEL_125M (0x1 << 3)
+#define YT8521_SCR_CLK_FRE_SEL_25M (0x0 << 3)
+#define YT8531_SCR_CLK_SRC_MASK (BIT(3) | BIT(2) | BIT(1))
+#define YT8531_SCR_CLK_SRC_PLL_125M (0x0 << 1)
+#define YT8531_SCR_CLK_SRC_REF_25M (0x4 << 1)
+#define YT8531_SCR_SYNCE_ENABLE BIT(6)
+#define YT8531_SCR_CLK_FRE_SEL_MASK BIT(4)
+#define YT8531_SCR_CLK_FRE_SEL_125M (0x1 << 4)
+#define YT8531_SCR_CLK_FRE_SEL_25M (0x0 << 4)
/* Extended Register end */
+#define YTPHY_DTS_MAX_TX_AMPLITUDE 0x2
+#define YTPHY_DTS_MAX_DELAY_VAL 2250
+#define YTPHY_DTS_STEP_DELAY_VAL 150
+#define YTPHY_DTS_INVAL_VAL 0xFF
+
+#define YTPHY_DTS_OUTPUT_CLK_DIS 0
+#define YTPHY_DTS_OUTPUT_CLK_25M 25000000
+#define YTPHY_DTS_OUTPUT_CLK_125M 125000000
+
struct yt8521_priv {
/* combo_advertising is used for case of YT8521 in combo mode,
* this means that yt8521 may work in utp or fiber mode which depends
@@ -243,6 +282,30 @@ struct yt8521_priv {
* YT8521_RSSR_TO_BE_ARBITRATED
*/
u8 reg_page;
+
+ /* The following parameters are from dts */
+ /* rx delay = rx_delay_basic + rx_delay_additional
+ * basic delay is ~2ns, 0 = off, 1 = on
+ * rx_delay_additional,delay time = 150ps * val
+ */
+ u8 rx_delay_basic;
+ u8 rx_delay_additional;
+
+ /* tx_delay_ge is tx_delay for 1000Mbps
+ * tx_delay_fe is tx_delay for 100Mbps or 10Mbps
+ * delay time = 150ps * val
+ */
+ u8 tx_delay_ge;
+ u8 tx_delay_fe;
+ u8 sds_tx_amplitude;
+ bool keep_pll_enabled;
+ bool auto_sleep_disabled;
+ bool clock_ouput; /* output clock ctl: 0=off, 1=on */
+ bool clock_freq_125M; /* output clock freq selcect: 0=25M, 1=125M */
+ bool tx_clk_adj_enabled;/* tx clk adj ctl: 0=off, 1=on */
+ bool tx_clk_10_inverted;
+ bool tx_clk_100_inverted;
+ bool tx_clk_1000_inverted;
};
/**
@@ -593,6 +656,325 @@ static int yt8521_write_page(struct phy_device *phydev, int page)
return ytphy_modify_ext(phydev, YT8521_REG_SPACE_SELECT_REG, mask, set);
};
+static int ytphy_parse_dt(struct phy_device *phydev)
+{
+ struct device_node *node = phydev->mdio.dev.of_node;
+ struct yt8521_priv *priv = phydev->priv;
+ u32 freq, val;
+ int ret;
+
+ priv->rx_delay_additional = YTPHY_DTS_INVAL_VAL;
+ priv->sds_tx_amplitude = YTPHY_DTS_INVAL_VAL;
+ priv->rx_delay_basic = YTPHY_DTS_INVAL_VAL;
+ priv->tx_delay_ge = YTPHY_DTS_INVAL_VAL;
+ priv->tx_delay_fe = YTPHY_DTS_INVAL_VAL;
+
+ if (!IS_ENABLED(CONFIG_OF_MDIO)) {
+ priv->auto_sleep_disabled = true;
+ priv->keep_pll_enabled = true;
+ return 0;
+ }
+
+ ret = of_property_read_u32(node, "motorcomm,clk-out-frequency", &freq);
+ if (ret < 0)
+ freq = YTPHY_DTS_OUTPUT_CLK_DIS;/* default value as dts*/
+
+ switch (freq) {
+ case YTPHY_DTS_OUTPUT_CLK_DIS:
+ priv->clock_ouput = false;
+ break;
+ case YTPHY_DTS_OUTPUT_CLK_25M:
+ priv->clock_freq_125M = false;
+ priv->clock_ouput = true;
+ break;
+ case YTPHY_DTS_OUTPUT_CLK_125M:
+ priv->clock_freq_125M = true;
+ priv->clock_ouput = true;
+ break;
+ default:
+ phydev_err(phydev, "invalid motorcomm,clk-out-frequency\n");
+ return -EINVAL;
+ }
+
+ if (!of_property_read_u32(node, "motorcomm,rx-delay-basic", &val)) {
+ if (val > 1) {
+ phydev_err(phydev,
+ "invalid motorcomm,rx-delay-basic\n");
+ return -EINVAL;
+ }
+ priv->rx_delay_basic = val;
+ }
+
+ if (!of_property_read_u32(node, "motorcomm,rx-delay-additional-ps", &val)) {
+ if (val > YTPHY_DTS_MAX_DELAY_VAL) {
+ phydev_err(phydev, "invalid motorcomm,rx-delay-additional-ps\n");
+ return -EINVAL;
+ }
+ if (val)
+ val /= YTPHY_DTS_STEP_DELAY_VAL;
+ priv->rx_delay_additional = val;
+ }
+
+ if (!of_property_read_u32(node, "motorcomm,tx-delay-fe-ps", &val)) {
+ if (val > YTPHY_DTS_MAX_DELAY_VAL) {
+ phydev_err(phydev,
+ "invalid motorcomm,tx-delay-fe-ps\n");
+ return -EINVAL;
+ }
+ if (val)
+ val /= YTPHY_DTS_STEP_DELAY_VAL;
+ priv->tx_delay_fe = val;
+ }
+
+ if (!of_property_read_u32(node, "motorcomm,tx-delay-ge-ps", &val)) {
+ if (val > YTPHY_DTS_MAX_DELAY_VAL) {
+ phydev_err(phydev,
+ "invalid motorcomm,tx-delay-ge-ps\n");
+ return -EINVAL;
+ }
+ if (val)
+ val /= YTPHY_DTS_STEP_DELAY_VAL;
+ priv->tx_delay_ge = val;
+ }
+
+ if (of_property_read_bool(node, "motorcomm,keep-pll-enabled"))
+ priv->keep_pll_enabled = true;
+
+ if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled"))
+ priv->auto_sleep_disabled = true;
+
+ if (of_property_read_bool(node, "motorcomm,tx-clk-adj-enabled"))
+ priv->tx_clk_adj_enabled = true;
+ if (priv->tx_clk_adj_enabled) {
+ if (of_property_read_bool(node, "motorcomm,tx-clk-10-inverted"))
+ priv->tx_clk_10_inverted = true;
+ if (of_property_read_bool(node, "motorcomm,tx-clk-100-inverted"))
+ priv->tx_clk_100_inverted = true;
+ if (of_property_read_bool(node, "motorcomm,tx-clk-1000-inverted"))
+ priv->tx_clk_1000_inverted = true;
+ }
+
+ if (!of_property_read_u32(node, "motorcomm,sds-tx-amplitude", &val)) {
+ if (val > YTPHY_DTS_MAX_TX_AMPLITUDE) {
+ phydev_err(phydev,
+ "invalid motorcomm,sds-tx-amplitude\n");
+ return -EINVAL;
+ }
+ priv->sds_tx_amplitude = val;
+ }
+
+ return 0;
+}
+
+static int ytphy_clk_out_config(struct phy_device *phydev)
+{
+ struct yt8521_priv *priv = phydev->priv;
+ u16 set = 0;
+ u16 mask;
+
+ switch (phydev->drv->phy_id) {
+ case PHY_ID_YT8511:
+ /* YT8511 will be supported later */
+ return -EOPNOTSUPP;
+ case PHY_ID_YT8521:
+ mask = YT8521_SCR_SYNCE_ENABLE;
+ if (priv->clock_ouput) {
+ mask |= YT8521_SCR_CLK_SRC_MASK;
+ mask |= YT8521_SCR_CLK_FRE_SEL_MASK;
+ set |= YT8521_SCR_SYNCE_ENABLE;
+ if (priv->clock_freq_125M) {
+ set |= YT8521_SCR_CLK_FRE_SEL_125M;
+ set |= YT8521_SCR_CLK_SRC_PLL_125M;
+ } else {
+ set |= YT8521_SCR_CLK_FRE_SEL_25M;
+ set |= YT8521_SCR_CLK_SRC_REF_25M;
+ }
+ }
+ break;
+ case PHY_ID_YT8531:
+ case PHY_ID_YT8531S:
+ mask = YT8531_SCR_SYNCE_ENABLE;
+ if (priv->clock_ouput) {
+ mask |= YT8531_SCR_CLK_SRC_MASK;
+ mask |= YT8531_SCR_CLK_FRE_SEL_MASK;
+ set |= YT8531_SCR_SYNCE_ENABLE;
+ if (priv->clock_freq_125M) {
+ set |= YT8531_SCR_CLK_FRE_SEL_125M;
+ set |= YT8531_SCR_CLK_SRC_PLL_125M;
+ } else {
+ set |= YT8531_SCR_CLK_FRE_SEL_25M;
+ set |= YT8531_SCR_CLK_SRC_REF_25M;
+ }
+ }
+ break;
+ default:
+ phydev_err(phydev, "invalid phy id\n");
+ return -EINVAL;
+ }
+
+ return ytphy_modify_ext(phydev, YTPHY_SYNCE_CFG_REG, mask, set);
+}
+
+static int ytphy_serdes_tx_amplitude_config(struct phy_device *phydev)
+{
+ u16 yt8531s_tx_amplitude[] = { YT8531S_SAC2R_TX_AMPLITUDE_LOW,
+ YT8531S_SAC2R_TX_AMPLITUDE_MIDDLE,
+ YT8531S_SAC2R_TX_AMPLITUDE_HIGH };
+ u16 yt8521_tx_amplitude[] = { YT8521_SAC2R_TX_AMPLITUDE_LOW,
+ YT8521_SAC2R_TX_AMPLITUDE_MIDDLE,
+ YT8521_SAC2R_TX_AMPLITUDE_HIGH };
+ struct yt8521_priv *priv = phydev->priv;
+ u16 tx_amplitude;
+
+ if (priv->sds_tx_amplitude == YTPHY_DTS_INVAL_VAL)
+ /* don't config Serdes tx amplitude.*/
+ return 0;
+
+ switch (phydev->drv->phy_id) {
+ case PHY_ID_YT8511:
+ case PHY_ID_YT8531:
+ /* YT8511 and YT8531 not support this function.*/
+ return -EOPNOTSUPP;
+ case PHY_ID_YT8521:
+ tx_amplitude = yt8521_tx_amplitude[priv->sds_tx_amplitude];
+ break;
+ case PHY_ID_YT8531S:
+ tx_amplitude = yt8531s_tx_amplitude[priv->sds_tx_amplitude];
+ break;
+ default:
+ phydev_err(phydev, "invalid phy id\n");
+ return -EINVAL;
+ }
+
+ return ytphy_modify_ext(phydev, YTPHY_SERDES_ANALOG_CFG2_REG,
+ YTPHY_SAC2R_TX_AMPLITUDE_MASK, tx_amplitude);
+}
+
+static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev)
+{
+ struct yt8521_priv *priv = phydev->priv;
+ u16 mask = 0;
+ u16 val = 0;
+ int ret;
+
+ /* rx delay basic controlled by dts.*/
+ if (priv->rx_delay_basic != YTPHY_DTS_INVAL_VAL) {
+ if (priv->rx_delay_basic)
+ val = YT8521_CCR_RXC_DLY_EN;
+ ret = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG,
+ YT8521_CCR_RXC_DLY_EN, val);
+ if (ret < 0)
+ return ret;
+ }
+
+ val = 0;
+ /* If rx_delay_additional and tx_delay_* are all not be seted in dts,
+ * then used the fixed *_DELAY_DIS or *_DELAY_EN. Otherwise, use the
+ * value set by rx_delay_additional, tx_delay_ge and tx_delay_fe.
+ */
+ if ((priv->rx_delay_additional & priv->tx_delay_ge & priv->tx_delay_fe)
+ == YTPHY_DTS_INVAL_VAL) {
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val |= YT8521_RC1R_GE_TX_DELAY_DIS;
+ val |= YT8521_RC1R_FE_TX_DELAY_DIS;
+ val |= YT8521_RC1R_RX_DELAY_DIS;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ val |= YT8521_RC1R_GE_TX_DELAY_DIS;
+ val |= YT8521_RC1R_FE_TX_DELAY_DIS;
+ val |= YT8521_RC1R_RX_DELAY_EN;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ val |= YT8521_RC1R_GE_TX_DELAY_EN;
+ val |= YT8521_RC1R_FE_TX_DELAY_EN;
+ val |= YT8521_RC1R_RX_DELAY_DIS;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ val |= YT8521_RC1R_GE_TX_DELAY_EN;
+ val |= YT8521_RC1R_FE_TX_DELAY_EN;
+ val |= YT8521_RC1R_RX_DELAY_EN;
+ break;
+ default: /* do not support other modes */
+ return -EOPNOTSUPP;
+ }
+ mask = YT8521_RC1R_RX_DELAY_MASK | YT8521_RC1R_FE_TX_DELAY_MASK
+ | YT8521_RC1R_GE_TX_DELAY_MASK;
+ } else {
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ if (priv->rx_delay_additional != YTPHY_DTS_INVAL_VAL) {
+ mask |= YT8521_RC1R_RX_DELAY_MASK;
+ val |= (priv->rx_delay_additional) << YT8521_RC1R_RX_DELAY_BIT;
+ }
+ if (priv->tx_delay_fe != YTPHY_DTS_INVAL_VAL) {
+ mask |= YT8521_RC1R_FE_TX_DELAY_MASK;
+ val |= (priv->tx_delay_fe) << YT8521_RC1R_FE_TX_DELAY_BIT;
+ }
+ if (priv->tx_delay_ge != YTPHY_DTS_INVAL_VAL) {
+ mask |= YT8521_RC1R_GE_TX_DELAY_MASK;
+ val |= (priv->tx_delay_ge) << YT8521_RC1R_GE_TX_DELAY_BIT;
+ }
+ break;
+ default: /* do not support other modes */
+ return -EOPNOTSUPP;
+ }
+ }
+
+ return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val);
+}
+
+static int ytphy_clk_delay_config(struct phy_device *phydev)
+{
+ switch (phydev->drv->phy_id) {
+ case PHY_ID_YT8511:
+ /* YT8511 will be supported later */
+ return -EOPNOTSUPP;
+ case PHY_ID_YT8521:
+ case PHY_ID_YT8531S:
+ /* YT8521 and YT8531S support SGMII mode, but don't need
+ * delay.
+ */
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII)
+ return 0;
+
+ return ytphy_rgmii_clk_delay_config(phydev);
+ case PHY_ID_YT8531:
+ /* YT8531 don't support SGMII mode. */
+ return ytphy_rgmii_clk_delay_config(phydev);
+ default:
+ phydev_err(phydev, "invalid phy id\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ytphy_probe_helper(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct yt8521_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ ret = ytphy_parse_dt(phydev);
+ if (ret < 0)
+ return ret;
+
+ phy_lock_mdio_bus(phydev);
+ ret = ytphy_clk_out_config(phydev);
+ phy_unlock_mdio_bus(phydev);
+ return ret;
+}
+
/**
* yt8521_probe() - read chip config then set suitable polling_mode
* @phydev: a pointer to a &struct phy_device
@@ -601,16 +983,15 @@ static int yt8521_write_page(struct phy_device *phydev, int page)
*/
static int yt8521_probe(struct phy_device *phydev)
{
- struct device *dev = &phydev->mdio.dev;
struct yt8521_priv *priv;
int chip_config;
int ret;
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
+ ret = ytphy_probe_helper(phydev);
+ if (ret < 0)
+ return ret;
- phydev->priv = priv;
+ priv = phydev->priv;
chip_config = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG);
if (chip_config < 0)
@@ -651,26 +1032,6 @@ static int yt8521_probe(struct phy_device *phydev)
return 0;
}
-/**
- * yt8531s_probe() - read chip config then set suitable polling_mode
- * @phydev: a pointer to a &struct phy_device
- *
- * returns 0 or negative errno code
- */
-static int yt8531s_probe(struct phy_device *phydev)
-{
- int ret;
-
- /* Disable SyncE clock output by default */
- ret = ytphy_modify_ext_with_lock(phydev, YT8531S_SYNCE_CFG_REG,
- YT8531S_SCR_SYNCE_ENABLE, 0);
- if (ret < 0)
- return ret;
-
- /* same as yt8521_probe */
- return yt8521_probe(phydev);
-}
-
/**
* ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp
* @phydev: a pointer to a &struct phy_device
@@ -1125,6 +1486,34 @@ static int yt8521_resume(struct phy_device *phydev)
return yt8521_modify_utp_fiber_bmcr(phydev, BMCR_PDOWN, 0);
}
+static int ytphy_config_init_helper(struct phy_device *phydev)
+{
+ struct yt8521_priv *priv = phydev->priv;
+ int ret;
+
+ ret = ytphy_clk_delay_config(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* disable auto sleep */
+ if (priv->auto_sleep_disabled) {
+ ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG,
+ YT8521_ESC1R_SLEEP_SW, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* enable RXC clock when no wire plug */
+ if (priv->keep_pll_enabled) {
+ ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG,
+ YT8521_CGR_RX_CLK_EN, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
/**
* yt8521_config_init() - called to initialize the PHY
* @phydev: a pointer to a &struct phy_device
@@ -1135,59 +1524,21 @@ static int yt8521_config_init(struct phy_device *phydev)
{
int old_page;
int ret = 0;
- u16 val;
old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
if (old_page < 0)
goto err_restore_page;
- switch (phydev->interface) {
- case PHY_INTERFACE_MODE_RGMII:
- val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS;
- val |= YT8521_RC1R_RX_DELAY_DIS;
- break;
- case PHY_INTERFACE_MODE_RGMII_RXID:
- val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS;
- val |= YT8521_RC1R_RX_DELAY_EN;
- break;
- case PHY_INTERFACE_MODE_RGMII_TXID:
- val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN;
- val |= YT8521_RC1R_RX_DELAY_DIS;
- break;
- case PHY_INTERFACE_MODE_RGMII_ID:
- val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN;
- val |= YT8521_RC1R_RX_DELAY_EN;
- break;
- case PHY_INTERFACE_MODE_SGMII:
- break;
- default: /* do not support other modes */
- ret = -EOPNOTSUPP;
- goto err_restore_page;
- }
-
- /* set rgmii delay mode */
- if (phydev->interface != PHY_INTERFACE_MODE_SGMII) {
- ret = ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG,
- (YT8521_RC1R_RX_DELAY_MASK |
- YT8521_RC1R_FE_TX_DELAY_MASK |
- YT8521_RC1R_GE_TX_DELAY_MASK),
- val);
- if (ret < 0)
- goto err_restore_page;
- }
-
- /* disable auto sleep */
- ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG,
- YT8521_ESC1R_SLEEP_SW, 0);
+ ret = ytphy_config_init_helper(phydev);
if (ret < 0)
goto err_restore_page;
- /* enable RXC clock when no wire plug */
- ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG,
- YT8521_CGR_RX_CLK_EN, 0);
+ ret = yt8521_write_page(phydev, YT8521_RSSR_FIBER_SPACE);
if (ret < 0)
goto err_restore_page;
+ ret = ytphy_serdes_tx_amplitude_config(phydev);
+
err_restore_page:
return phy_restore_page(phydev, old_page, ret);
}
@@ -1778,7 +2129,7 @@ static struct phy_driver motorcomm_phy_drvs[] = {
PHY_ID_MATCH_EXACT(PHY_ID_YT8531S),
.name = "YT8531S Gigabit Ethernet",
.get_features = yt8521_get_features,
- .probe = yt8531s_probe,
+ .probe = yt8521_probe,
.read_page = yt8521_read_page,
.write_page = yt8521_write_page,
.get_wol = ytphy_get_wol,
@@ -1804,7 +2155,7 @@ static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8521) },
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) },
- { /* sentinal */ }
+ { /* sentinel */ }
};
MODULE_DEVICE_TABLE(mdio, motorcomm_tbl);
--
2.34.1
Powered by blists - more mailing lists