| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9a25328bcf2c0d963e34d33ff0968f83755905f4.1673030528.git.piergiorgio.beruto@gmail.com>
Date: Fri, 6 Jan 2023 19:45:02 +0100
From: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Oleksij Rempel <o.rempel@...gutronix.de>,
mailhol.vincent@...adoo.fr, sudheer.mogilappagari@...el.com,
sbhatta@...vell.com, linux-doc@...r.kernel.org,
wangjie125@...wei.com, corbet@....net, lkp@...el.com,
gal@...dia.com, gustavoars@...nel.org
Subject: [PATCH v2 net-next 3/5] drivers/net/phy: add connection between
ethtool and phylib for PLCA
This patch adds the required connection between netlink ethtool and
phylib to resolve PLCA get/set config and get status messages.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@...il.com>
---
drivers/net/phy/phy.c | 174 +++++++++++++++++++++++++++++++++++
drivers/net/phy/phy_device.c | 3 +
include/linux/phy.h | 7 ++
3 files changed, 184 insertions(+)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e5b6cb1a77f9..4d67ca234816 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -543,6 +543,180 @@ int phy_ethtool_get_stats(struct phy_device *phydev,
}
EXPORT_SYMBOL(phy_ethtool_get_stats);
+/**
+ * phy_ethtool_get_plca_cfg - Get PLCA RS configuration
+ * @phydev: the phy_device struct
+ * @plca_cfg: where to store the retrieved configuration
+ *
+ * Retrieve the PLCA configuration from the PHY. Return 0 on success or a
+ * negative value if an error occurred.
+ */
+int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
+ struct phy_plca_cfg *plca_cfg)
+{
+ int ret;
+
+ if (!phydev->drv) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (!phydev->drv->get_plca_cfg) {
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ mutex_lock(&phydev->lock);
+ ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
+
+ mutex_unlock(&phydev->lock);
+out:
+ return ret;
+}
+
+/**
+ * phy_ethtool_set_plca_cfg - Set PLCA RS configuration
+ * @phydev: the phy_device struct
+ * @plca_cfg: new PLCA configuration to apply
+ * @extack: extack for reporting useful error messages
+ *
+ * Sets the PLCA configuration in the PHY. Return 0 on success or a
+ * negative value if an error occurred.
+ */
+int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
+ const struct phy_plca_cfg *plca_cfg,
+ struct netlink_ext_ack *extack)
+{
+ struct phy_plca_cfg *curr_plca_cfg;
+ int ret;
+
+ if (!phydev->drv) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (!phydev->drv->set_plca_cfg ||
+ !phydev->drv->get_plca_cfg) {
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ curr_plca_cfg = kmalloc(sizeof(*curr_plca_cfg), GFP_KERNEL);
+ if (!curr_plca_cfg) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ mutex_lock(&phydev->lock);
+
+ ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
+ if (ret)
+ goto out_drv;
+
+ if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'enable' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'local node ID' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'node count' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'TO timer' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'burst count' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) {
+ NL_SET_ERR_MSG(extack,
+ "PHY does not support changing the PLCA 'burst timer' attribute");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+ // if not enabling PLCA, skip a few sanity checks
+ if (plca_cfg->enabled <= 0)
+ goto apply_cfg;
+
+ if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
+ phydev->advertising)) {
+ ret = -EOPNOTSUPP;
+ NL_SET_ERR_MSG(extack,
+ "Point to Multi-Point mode is not enabled");
+ }
+
+ // allow setting node_id concurrently with enabled
+ if (plca_cfg->node_id >= 0)
+ curr_plca_cfg->node_id = plca_cfg->node_id;
+
+ if (curr_plca_cfg->node_id >= 255) {
+ NL_SET_ERR_MSG(extack, "PLCA node ID is not set");
+ ret = -EINVAL;
+ goto out_drv;
+ }
+
+apply_cfg:
+ ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
+
+out_drv:
+ kfree(curr_plca_cfg);
+ mutex_unlock(&phydev->lock);
+out:
+ return ret;
+}
+
+/**
+ * phy_ethtool_get_plca_status - Get PLCA RS status information
+ * @phydev: the phy_device struct
+ * @plca_st: where to store the retrieved status information
+ *
+ * Retrieve the PLCA status information from the PHY. Return 0 on success or a
+ * negative value if an error occurred.
+ */
+int phy_ethtool_get_plca_status(struct phy_device *phydev,
+ struct phy_plca_status *plca_st)
+{
+ int ret;
+
+ if (!phydev->drv) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (!phydev->drv->get_plca_status) {
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ mutex_lock(&phydev->lock);
+ ret = phydev->drv->get_plca_status(phydev, plca_st);
+
+ mutex_unlock(&phydev->lock);
+out:
+ return ret;
+}
+
/**
* phy_start_cable_test - Start a cable test
*
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8e48b3cec5e7..44bd06be9691 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3276,6 +3276,9 @@ static const struct ethtool_phy_ops phy_ethtool_phy_ops = {
.get_sset_count = phy_ethtool_get_sset_count,
.get_strings = phy_ethtool_get_strings,
.get_stats = phy_ethtool_get_stats,
+ .get_plca_cfg = phy_ethtool_get_plca_cfg,
+ .set_plca_cfg = phy_ethtool_set_plca_cfg,
+ .get_plca_status = phy_ethtool_get_plca_status,
.start_cable_test = phy_start_cable_test,
.start_cable_test_tdr = phy_start_cable_test_tdr,
};
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 1e87d3f05209..bcaf1dfd0687 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1846,6 +1846,13 @@ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data);
int phy_ethtool_get_sset_count(struct phy_device *phydev);
int phy_ethtool_get_stats(struct phy_device *phydev,
struct ethtool_stats *stats, u64 *data);
+int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
+ struct phy_plca_cfg *plca_cfg);
+int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
+ const struct phy_plca_cfg *plca_cfg,
+ struct netlink_ext_ack *extack);
+int phy_ethtool_get_plca_status(struct phy_device *phydev,
+ struct phy_plca_status *plca_st);
static inline int phy_package_read(struct phy_device *phydev, u32 regnum)
{
--
2.37.4
Powered by blists - more mailing lists