netdev - Re: [PATCH v2 4/4] arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <7d74a96e-e3a5-118c-04a9-e8ed95fffa54@linaro.org>
Date:   Thu, 12 Jan 2023 10:37:16 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Sriranjani P <sriranjani.p@...sung.com>, davem@...emloft.net,
        edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com,
        robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        alexandre.torgue@...s.st.com, peppe.cavallaro@...com,
        joabreu@...opsys.com, mcoquelin.stm32@...il.com
Cc:     netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, pankaj.dubey@...sung.com,
        alim.akhtar@...sung.com, ravi.patel@...sung.com,
        Jayati Sahu <jayati.sahu@...sung.com>
Subject: Re: [PATCH v2 4/4] arm64: dts: fsd: Add Ethernet support for PERIC
 Block of FSD SoC

On 11/01/2023 08:54, Sriranjani P wrote:
> The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one in
> FSYS0 block and other in PERIC block.
> 
> Adds device tree node for Ethernet in PERIC Block and enables the same for
> FSD platform.
> 
> Signed-off-by: Pankaj Dubey <pankaj.dubey@...sung.com>
> Signed-off-by: Jayati Sahu <jayati.sahu@...sung.com>
> Signed-off-by: Sriranjani P <sriranjani.p@...sung.com>
> ---
>  arch/arm64/boot/dts/tesla/fsd-evb.dts      |  9 ++++
>  arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 56 ++++++++++++++++++++++
>  arch/arm64/boot/dts/tesla/fsd.dtsi         | 29 +++++++++++
>  3 files changed, 94 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
> index ca0c1a28d562..2c0cbe775e04 100644
> --- a/arch/arm64/boot/dts/tesla/fsd-evb.dts
> +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
> @@ -39,6 +39,15 @@
>  	};
>  };
>  
> +&ethernet_1 {
> +	status = "okay";
> +
> +	fixed-link {
> +		speed = <1000>;
> +		full-duplex;
> +	};
> +};
> +
>  &fin_pll {
>  	clock-frequency = <24000000>;
>  };
> diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> index 7ccc0738a149..c955bf159786 100644
> --- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> @@ -395,6 +395,62 @@
>  		samsung,pin-pud = <FSD_PIN_PULL_UP>;
>  		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
>  	};
> +
> +	eth1_tx_clk: eth1-tx-clk-pins {
> +		samsung,pins = "gpf2-0";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth1_tx_data: eth1-tx-data-pins {
> +		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-4";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth1_tx_ctrl: eth1-tx-ctrl-pins {
> +		samsung,pins = "gpf2-5";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth1_phy_intr: eth1-phy-intr-pins {
> +		samsung,pins = "gpf2-6";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> +	};
> +
> +	eth1_rx_clk: eth1-rx-clk-pins {
> +		samsung,pins = "gpf3-0";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth1_rx_data: eth1-rx-data-pins {
> +		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth1_rx_ctrl: eth1-rx-ctrl-pins {
> +		samsung,pins = "gpf3-5";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
> +	};
> +
> +	eth1_mdio: eth1-mdio-pins {
> +		samsung,pins = "gpf3-6", "gpf3-7";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> +	};
>  };
>  
>  &pinctrl_pmu {
> diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
> index ade707cc646b..8807055807dd 100644
> --- a/arch/arm64/boot/dts/tesla/fsd.dtsi
> +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
> @@ -33,6 +33,7 @@
>  		spi1 = &spi_1;
>  		spi2 = &spi_2;
>  		eth0 = &ethernet_0;
> +		eth1 = &ethernet_1;

Nope for the reasons I explained last time.

>  	};
>  
>  	cpus {
> @@ -882,6 +883,34 @@
>  			phy-mode = "rgmii";
>  			status = "disabled";
>  		};
> +
> +		ethernet_1: ethernet@...00000 {

Do not add nodes to the end.

Best regards,
Krzysztof