[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87k01q400j.fsf@nvidia.com>
Date: Fri, 13 Jan 2023 13:06:52 -0800
From: Rahul Rameshbabu <rrameshbabu@...dia.com>
To: Maxim Mikityanskiy <maxtram95@...il.com>
Cc: Hariprasad Kelam <hkelam@...vell.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, kuba@...nel.org, davem@...emloft.net,
pabeni@...hat.com, edumazet@...gle.com, sgoutham@...vell.com,
lcherian@...vell.com, gakula@...vell.com, jerinj@...vell.com,
sbhatta@...vell.com, Naveen Mamindlapalli <naveenm@...vell.com>,
Tariq Toukan <tariqt@...dia.com>,
Saeed Mahameed <saeedm@...dia.com>,
Gal Pressman <gal@...dia.com>
Subject: Re: [net-next PATCH 1/5] sch_htb: Allow HTB priority parameter in
offload mode
On Fri, 13 Jan, 2023 14:19:38 +0200 Maxim Mikityanskiy <maxtram95@...il.com> wrote:
> On Thu, Jan 12, 2023 at 11:01:16PM +0530, Hariprasad Kelam wrote:
>> From: Naveen Mamindlapalli <naveenm@...vell.com>
>>
>> The current implementation of HTB offload returns the EINVAL error
>> for unsupported parameters like prio and quantum. This patch removes
>> the error returning checks for 'prio' parameter and populates its
>> value to tc_htb_qopt_offload structure such that driver can use the
>> same.
>>
>> Signed-off-by: Naveen Mamindlapalli <naveenm@...vell.com>
>> Signed-off-by: Hariprasad Kelam <hkelam@...vell.com>
>> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@...vell.com>
>> ---
>> include/net/pkt_cls.h | 1 +
>> net/sched/sch_htb.c | 7 +++----
>> 2 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h
>> index 4cabb32a2ad9..02afb1baf39d 100644
>> --- a/include/net/pkt_cls.h
>> +++ b/include/net/pkt_cls.h
>> @@ -864,6 +864,7 @@ struct tc_htb_qopt_offload {
>> u16 qid;
>> u64 rate;
>> u64 ceil;
>> + u8 prio;
>> };
>>
>> #define TC_HTB_CLASSID_ROOT U32_MAX
>> diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
>> index 2238edece1a4..f2d034cdd7bd 100644
>> --- a/net/sched/sch_htb.c
>> +++ b/net/sched/sch_htb.c
>> @@ -1806,10 +1806,6 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
>> NL_SET_ERR_MSG(extack, "HTB offload doesn't support the quantum parameter");
>> goto failure;
>> }
>> - if (hopt->prio) {
>> - NL_SET_ERR_MSG(extack, "HTB offload doesn't support the prio parameter");
>> - goto failure;
>> - }
>
> The check should go to mlx5e then.
>
Agreed. Also, I am wondering in general if its a good idea for the HTB
offload implementation to be dictating what parameters are and are not
supported.
if (q->offload) {
/* Options not supported by the offload. */
if (hopt->rate.overhead || hopt->ceil.overhead) {
NL_SET_ERR_MSG(extack, "HTB offload doesn't support the overhead parameter");
goto failure;
}
if (hopt->rate.mpu || hopt->ceil.mpu) {
NL_SET_ERR_MSG(extack, "HTB offload doesn't support the mpu parameter");
goto failure;
}
if (hopt->quantum) {
NL_SET_ERR_MSG(extack, "HTB offload doesn't support the quantum parameter");
goto failure;
}
}
Every time a vendor introduces support for a new offload parameter,
netdevs that cannot support said parameter are affected. I think it
would be better to remove this block and expect each driver to check
what parameters are and are not supported for their offload flow.
>> }
>>
>> /* Keeping backward compatible with rate_table based iproute2 tc */
>> @@ -1905,6 +1901,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
>> TC_HTB_CLASSID_ROOT,
>> .rate = max_t(u64, hopt->rate.rate, rate64),
>> .ceil = max_t(u64, hopt->ceil.rate, ceil64),
>> + .prio = hopt->prio,
>> .extack = extack,
>> };
>> err = htb_offload(dev, &offload_opt);
>> @@ -1925,6 +1922,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
>> TC_H_MIN(parent->common.classid),
>> .rate = max_t(u64, hopt->rate.rate, rate64),
>> .ceil = max_t(u64, hopt->ceil.rate, ceil64),
>> + .prio = hopt->prio,
>> .extack = extack,
>> };
>> err = htb_offload(dev, &offload_opt);
>> @@ -2010,6 +2008,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
>> .classid = cl->common.classid,
>> .rate = max_t(u64, hopt->rate.rate, rate64),
>> .ceil = max_t(u64, hopt->ceil.rate, ceil64),
>> + .prio = hopt->prio,
>> .extack = extack,
>> };
>> err = htb_offload(dev, &offload_opt);
>> --
>> 2.17.1
>>
Powered by blists - more mailing lists