[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87pmbe1hu0.fsf@miraculix.mork.no>
Date: Mon, 16 Jan 2023 18:59:19 +0100
From: Bjørn Mork <bjorn@...k.no>
To: "Russell King (Oracle)" <linux@...linux.org.uk>
Cc: Frank Wunderlich <frank-w@...lic-files.de>,
Frank Wunderlich <linux@...web.de>,
linux-mediatek@...ts.infradead.org,
Alexander Couzens <lynxis@...0.eu>,
Felix Fietkau <nbd@....name>, John Crispin <john@...ozen.org>,
Sean Wang <sean.wang@...iatek.com>,
Mark Lee <Mark-MC.Lee@...iatek.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] net: mtk_sgmii: implement mtk_pcs_ops
"Russell King (Oracle)" <linux@...linux.org.uk> writes:
> On Mon, Jan 16, 2023 at 05:45:12PM +0100, Bjørn Mork wrote:
>> Bjørn Mork <bjorn@...k.no> writes:
>>
>> >> You have bmcr=0x1000, but the code sets two bits - SGMII_AN_RESTART and
>> >> SGMII_AN_ENABLE which are bits 9 and 12, so bmcr should be 0x1200, not
>> >> 0x1000. Any ideas why?
>> >
>> > No, not really
>>
>> Doh! Looked over it again, and this was my fault of course. Had an
>>
>> "bmcr = SGMII_AN_ENABLE;"
>>
>> line overwriting the original value from a previous attempt without
>> changing the if condition.. Thanks for spotting that.
>>
>> But this still doesn't work any better:
>>
>> [ 43.019395] mtk_soc_eth 15100000.ethernet wan: Link is Down
>> [ 45.099898] mtk_sgmii_select_pcs: id=1
>> [ 45.103653] mtk_pcs_config: interface=4
>> [ 45.107473] offset:0 0x140
>> [ 45.107476] offset:4 0x4d544950
>> [ 45.110181] offset:8 0x20
>> [ 45.113305] forcing AN
>> [ 45.118256] mtk_pcs_config: rgc3=0x0, advertise=0x1 (changed), link_timer=1600000, sgm_mode=0x103, bmcr=0x1200, use_an=1
>> [ 45.129191] mtk_pcs_link_up: interface=4
>> [ 45.133100] offset:0 0x81140
>> [ 45.133102] offset:4 0x4d544950
>> [ 45.135967] offset:8 0x1
>> [ 45.139104] mtk_soc_eth 15100000.ethernet wan: Link is Up - 1Gbps/Full - flow control rx/tx
>
> In your _dump_pcs_ctrl() function, please can you dump the
> SGMSYS_SGMII_MODE register as well (offset 0x20), in case this gives
> more clue as to what's going on.
[ 49.339410] mtk_soc_eth 15100000.ethernet wan: Link is Down
[ 52.459913] mtk_sgmii_select_pcs: id=1
[ 52.463673] mtk_pcs_config: interface=4
[ 52.467494] offset:0 0x140
[ 52.467496] offset:4 0x4d544950
[ 52.470199] offset:8 0x20
[ 52.473325] offset:20 0x10000
[ 52.475929] forcing AN
[ 52.481232] mtk_pcs_config: rgc3=0x0, advertise=0x1 (changed), link_timer=1600000, sgm_mode=0x103, bmcr=0x1200, use_an=1
[ 52.492166] mtk_pcs_link_up: interface=4
[ 52.496072] offset:0 0x81140
[ 52.496074] offset:4 0x4d544950
[ 52.498938] offset:8 0x1
[ 52.502067] offset:20 0x10000
[ 52.504599] mtk_soc_eth 15100000.ethernet wan: Link is Up - 1Gbps/Full - flow control rx/tx
[ 65.979410] mtk_soc_eth 15100000.ethernet wan: Link is Down
[ 70.139856] mtk_sgmii_select_pcs: id=1
[ 70.143616] mtk_pcs_config: interface=22
[ 70.147523] offset:0 0x81140
[ 70.147525] offset:4 0x4d544950
[ 70.150402] offset:8 0x1
[ 70.153526] offset:20 0x10000
[ 70.156049] mtk_pcs_config: rgc3=0x4, advertise=0x20 (changed), link_timer=10000000, sgm_mode=0x0, bmcr=0x0, use_an=0
[ 70.169672] mtk_pcs_link_up: interface=22
[ 70.173664] offset:0 0x40140
[ 70.173666] offset:4 0x4d544950
[ 70.176530] offset:8 0x20
[ 70.179659] offset:20 0x10000
[ 70.182279] mtk_soc_eth 15100000.ethernet wan: Link is Up - 2.5Gbps/Full - flow control rx/tx
Bjørn
Powered by blists - more mailing lists