netdev - [PATCH 2/2] net: stmmac: consider snps,rx-clk-runs-in-lpi DT parameter

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230123133747.18896-3-andrey.konovalov@linaro.org>
Date:   Mon, 23 Jan 2023 16:37:47 +0300
From:   Andrey Konovalov <andrey.konovalov@...aro.org>
To:     davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, alexandre.torgue@...s.st.com,
        peppe.cavallaro@...com, joabreu@...opsys.com,
        mcoquelin.stm32@...il.com
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org,
        Andrey Konovalov <andrey.konovalov@...aro.org>
Subject: [PATCH 2/2] net: stmmac: consider snps,rx-clk-runs-in-lpi DT parameter

If snps,rx-clk-runs-in-lpi parameter is present in the device tree, the
driver configures the PHY not to stop RX_CLK after entering Rx LPI state.

Signed-off-by: Andrey Konovalov <andrey.konovalov@...aro.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     | 3 ++-
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +++
 include/linux/stmmac.h                                | 1 +
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b7e5af58ab75..1a5b8dab5e9b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1080,7 +1080,8 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 
 	stmmac_mac_set(priv, priv->ioaddr, true);
 	if (phy && priv->dma_cap.eee) {
-		priv->eee_active = phy_init_eee(phy, 1) >= 0;
+		priv->eee_active =
+			phy_init_eee(phy, !priv->plat->rx_clk_runs_in_lpi) >= 0;
 		priv->eee_enabled = stmmac_eee_init(priv);
 		priv->tx_lpi_enabled = priv->eee_enabled;
 		stmmac_set_eee_pls(priv, priv->hw, true);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index eb6d9cd8e93f..4dacda387fa4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -468,6 +468,9 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 	plat->en_tx_lpi_clockgating =
 		of_property_read_bool(np, "snps,en-tx-lpi-clockgating");
 
+	plat->rx_clk_runs_in_lpi =
+		of_property_read_bool(np, "snps,rx-clk-runs-in-lpi");
+
 	/* Set the maxmtu to a default of JUMBO_LEN in case the
 	 * parameter is not present in the device tree.
 	 */
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 83ca2e8eb6b5..a152678b82b7 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -252,6 +252,7 @@ struct plat_stmmacenet_data {
 	int rss_en;
 	int mac_port_sel_speed;
 	bool en_tx_lpi_clockgating;
+	bool rx_clk_runs_in_lpi;
 	int has_xgmac;
 	bool vlan_fail_q_en;
 	u8 vlan_fail_q;
-- 
2.34.1