netdev - Re: [PATCH net] ixgbe: allow to increase MTU to some extent with XDP enalbed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Y9JvUKBgBifiosOa@boxer>
Date:   Thu, 26 Jan 2023 13:17:20 +0100
From:   Maciej Fijalkowski <maciej.fijalkowski@...el.com>
To:     Jason Xing <kerneljasonxing@...il.com>
CC:     <jesse.brandeburg@...el.com>, <anthony.l.nguyen@...el.com>,
        <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
        <pabeni@...hat.com>, <richardcochran@...il.com>, <ast@...nel.org>,
        <daniel@...earbox.net>, <hawk@...nel.org>,
        <john.fastabend@...il.co>, <intel-wired-lan@...ts.osuosl.org>,
        <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <bpf@...r.kernel.org>, Jason Xing <kernelxing@...cent.com>,
        <magnus.karlsson@...el.com>, <tirthendu.sarkar@...el.com>,
        <alexandr.lobakin@...el.com>
Subject: Re: [PATCH net] ixgbe: allow to increase MTU to some extent with XDP
 enalbed

On Sat, Jan 21, 2023 at 04:55:21PM +0800, Jason Xing wrote:
> From: Jason Xing <kernelxing@...cent.com>
> 
> I encountered one case where I cannot increase the MTU size with XDP
> enabled if the server is equipped with IXGBE card, which happened on
> thousands of servers. I noticed it was prohibited from 2017[1] and
> added size checks[2] if allowed soon after the previous patch.
> 
> Interesting part goes like this:
> 1) Changing MTU directly from 1500 (default value) to 2000 doesn't
> work because the driver finds out that 'new_frame_size >
> ixgbe_rx_bufsz(ring)' in ixgbe_change_mtu() function.
> 2) However, if we change MTU to 1501 then change from 1501 to 2000, it
> does work, because the driver sets __IXGBE_RX_3K_BUFFER when MTU size
> is converted to 1501, which later size check policy allows.
> 
> The default MTU value for most servers is 1500 which cannot be adjusted
> directly to the value larger than IXGBE_MAX_2K_FRAME_BUILD_SKB (1534 or
> 1536) if it loads XDP.
> 
> After I do a quick study on the manner of i40E driver allowing two kinds
> of buffer size (one is 2048 while another is 3072) to support XDP mode in
> i40e_max_xdp_frame_size(), I believe the default MTU size is possibly not
> satisfied in XDP mode when IXGBE driver is in use, we sometimes need to
> insert a new header, say, vxlan header. So setting the 3K-buffer flag
> could solve the issue.
> 
> [1] commit 38b7e7f8ae82 ("ixgbe: Do not allow LRO or MTU change with XDP")
> [2] commit fabf1bce103a ("ixgbe: Prevent unsupported configurations with
> XDP")
> 
> Signed-off-by: Jason Xing <kernelxing@...cent.com>
> ---
>  drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> index ab8370c413f3..dc016582f91e 100644
> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> @@ -4313,6 +4313,9 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
>  		if (IXGBE_2K_TOO_SMALL_WITH_PADDING ||
>  		    (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
>  			set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state);
> +
> +		if (ixgbe_enabled_xdp_adapter(adapter))
> +			set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state);

This will result with unnecessary overhead for 1500 MTU because you will
be working on order-1 pages. Instead I would focus on fixing
ixgbe_change_mtu() and stop relying on ixgbe_rx_bufsz() in there. You can
check what we do on ice/i40e sides.

I'm not looking actively into ixgbe internals but I don't think that there
is anything that stops us from using 3k buffers with XDP.

>  #endif
>  	}
>  }
> -- 
> 2.37.3
>