lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230126135339.3488682-1-arnd@kernel.org>
Date:   Thu, 26 Jan 2023 14:52:58 +0100
From:   Arnd Bergmann <arnd@...nel.org>
To:     Wei Fang <wei.fang@....com>
Cc:     linux-gpio@...r.kernel.org, Arnd Bergmann <arnd@...db.de>,
        Shenwei Wang <shenwei.wang@....com>,
        Clark Wang <xiaoning.wang@....com>,
        NXP Linux Team <linux-imx@....com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, Andrew Lunn <andrew@...n.ch>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] fec: convert to gpio descriptor

From: Arnd Bergmann <arnd@...db.de>

The driver can be trivially converted, as it only triggers the gpio
pin briefly to do a reset, and it already only supports DT.

Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
 drivers/net/ethernet/freescale/fec_main.c | 25 ++++++++++-------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 5ff45b1a74a5..dee2890fd702 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -56,7 +56,7 @@
 #include <linux/fec.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of_mdio.h>
 #include <linux/of_net.h>
 #include <linux/regulator/consumer.h>
@@ -4035,7 +4035,8 @@ static int fec_enet_init(struct net_device *ndev)
 #ifdef CONFIG_OF
 static int fec_reset_phy(struct platform_device *pdev)
 {
-	int err, phy_reset;
+	int err;
+	struct gpio_desc *phy_reset;
 	bool active_high = false;
 	int msec = 1, phy_post_delay = 0;
 	struct device_node *np = pdev->dev.of_node;
@@ -4048,12 +4049,6 @@ static int fec_reset_phy(struct platform_device *pdev)
 	if (!err && msec > 1000)
 		msec = 1;
 
-	phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
-	if (phy_reset == -EPROBE_DEFER)
-		return phy_reset;
-	else if (!gpio_is_valid(phy_reset))
-		return 0;
-
 	err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
 	/* valid reset duration should be less than 1s */
 	if (!err && phy_post_delay > 1000)
@@ -4061,11 +4056,13 @@ static int fec_reset_phy(struct platform_device *pdev)
 
 	active_high = of_property_read_bool(np, "phy-reset-active-high");
 
-	err = devm_gpio_request_one(&pdev->dev, phy_reset,
-			active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-			"phy-reset");
-	if (err) {
-		dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
+	phy_reset = devm_gpiod_get(&pdev->dev, "phy-reset",
+			active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
+	if (IS_ERR(phy_reset)) {
+		err = PTR_ERR(phy_reset);
+		if (err != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"failed to get phy-reset-gpios: %d\n", err);
 		return err;
 	}
 
@@ -4074,7 +4071,7 @@ static int fec_reset_phy(struct platform_device *pdev)
 	else
 		usleep_range(msec * 1000, msec * 1000 + 1000);
 
-	gpio_set_value_cansleep(phy_reset, !active_high);
+	gpiod_set_value_cansleep(phy_reset, !active_high);
 
 	if (!phy_post_delay)
 		return 0;
-- 
2.39.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ