| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230126162323.2986682-1-arnd@kernel.org>
Date: Thu, 26 Jan 2023 17:22:59 +0100
From: Arnd Bergmann <arnd@...nel.org>
To: Alexander Aring <alex.aring@...il.com>,
Stefan Schmidt <stefan@...enfreihafen.org>
Cc: Arnd Bergmann <arnd@...db.de>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, linux-kernel@...r.kernel.org,
linux-wpan@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH] [v2] at86rf230: convert to gpio descriptors
From: Arnd Bergmann <arnd@...db.de>
There are no remaining in-tree users of the platform_data,
so this driver can be converted to using the simpler gpiod
interfaces.
Any out-of-tree users that rely on the platform data can
provide the data using the device_property and gpio_lookup
interfaces instead.
Reviewed-by: Miquel Raynal <miquel.raynal@...tlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
drivers/net/ieee802154/at86rf230.c | 82 +++++++++---------------------
include/linux/spi/at86rf230.h | 20 --------
2 files changed, 25 insertions(+), 77 deletions(-)
delete mode 100644 include/linux/spi/at86rf230.h
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 15f283b26721..a4a6b7490fdc 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -15,13 +15,12 @@
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/spi/spi.h>
-#include <linux/spi/at86rf230.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/skbuff.h>
-#include <linux/of_gpio.h>
#include <linux/ieee802154.h>
#include <net/mac802154.h>
@@ -82,7 +81,7 @@ struct at86rf230_local {
struct ieee802154_hw *hw;
struct at86rf2xx_chip_data *data;
struct regmap *regmap;
- int slp_tr;
+ struct gpio_desc *slp_tr;
bool sleep;
struct completion state_complete;
@@ -107,8 +106,8 @@ at86rf230_async_state_change(struct at86rf230_local *lp,
static inline void
at86rf230_sleep(struct at86rf230_local *lp)
{
- if (gpio_is_valid(lp->slp_tr)) {
- gpio_set_value(lp->slp_tr, 1);
+ if (lp->slp_tr) {
+ gpiod_set_value(lp->slp_tr, 1);
usleep_range(lp->data->t_off_to_sleep,
lp->data->t_off_to_sleep + 10);
lp->sleep = true;
@@ -118,8 +117,8 @@ at86rf230_sleep(struct at86rf230_local *lp)
static inline void
at86rf230_awake(struct at86rf230_local *lp)
{
- if (gpio_is_valid(lp->slp_tr)) {
- gpio_set_value(lp->slp_tr, 0);
+ if (lp->slp_tr) {
+ gpiod_set_value(lp->slp_tr, 0);
usleep_range(lp->data->t_sleep_to_off,
lp->data->t_sleep_to_off + 100);
lp->sleep = false;
@@ -204,9 +203,9 @@ at86rf230_write_subreg(struct at86rf230_local *lp,
static inline void
at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp)
{
- gpio_set_value(lp->slp_tr, 1);
+ gpiod_set_value(lp->slp_tr, 1);
udelay(1);
- gpio_set_value(lp->slp_tr, 0);
+ gpiod_set_value(lp->slp_tr, 0);
}
static bool
@@ -819,7 +818,7 @@ at86rf230_write_frame_complete(void *context)
ctx->trx.len = 2;
- if (gpio_is_valid(lp->slp_tr))
+ if (lp->slp_tr)
at86rf230_slp_tr_rising_edge(lp);
else
at86rf230_async_write_reg(lp, RG_TRX_STATE, STATE_BUSY_TX, ctx,
@@ -1415,32 +1414,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0);
}
-static int
-at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr,
- u8 *xtal_trim)
-{
- struct at86rf230_platform_data *pdata = spi->dev.platform_data;
- int ret;
-
- if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) {
- if (!pdata)
- return -ENOENT;
-
- *rstn = pdata->rstn;
- *slp_tr = pdata->slp_tr;
- *xtal_trim = pdata->xtal_trim;
- return 0;
- }
-
- *rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
- *slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
- ret = of_property_read_u8(spi->dev.of_node, "xtal-trim", xtal_trim);
- if (ret < 0 && ret != -EINVAL)
- return ret;
-
- return 0;
-}
-
static int
at86rf230_detect_device(struct at86rf230_local *lp)
{
@@ -1547,7 +1520,8 @@ static int at86rf230_probe(struct spi_device *spi)
struct ieee802154_hw *hw;
struct at86rf230_local *lp;
unsigned int status;
- int rc, irq_type, rstn, slp_tr;
+ int rc, irq_type;
+ struct gpio_desc *rstn, *slp_tr;
u8 xtal_trim = 0;
if (!spi->irq) {
@@ -1555,32 +1529,26 @@ static int at86rf230_probe(struct spi_device *spi)
return -EINVAL;
}
- rc = at86rf230_get_pdata(spi, &rstn, &slp_tr, &xtal_trim);
- if (rc < 0) {
- dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc);
+ rc = device_property_read_u8(&spi->dev, "xtal-trim", &xtal_trim);
+ if (rc < 0 && rc != -EINVAL) {
+ dev_err(&spi->dev, "failed to parse xtal-trim: %d\n", rc);
return rc;
}
- if (gpio_is_valid(rstn)) {
- rc = devm_gpio_request_one(&spi->dev, rstn,
- GPIOF_OUT_INIT_HIGH, "rstn");
- if (rc)
- return rc;
- }
+ rstn = devm_gpiod_get_optional(&spi->dev, "rstn", GPIOD_OUT_HIGH);
+ if (IS_ERR(rstn))
+ return PTR_ERR(rstn);
- if (gpio_is_valid(slp_tr)) {
- rc = devm_gpio_request_one(&spi->dev, slp_tr,
- GPIOF_OUT_INIT_LOW, "slp_tr");
- if (rc)
- return rc;
- }
+ slp_tr = devm_gpiod_get_optional(&spi->dev, "slp_tr", GPIOD_OUT_LOW);
+ if (IS_ERR(slp_tr))
+ return PTR_ERR(slp_tr);
/* Reset */
- if (gpio_is_valid(rstn)) {
+ if (rstn) {
udelay(1);
- gpio_set_value_cansleep(rstn, 0);
+ gpiod_set_value_cansleep(rstn, 0);
udelay(1);
- gpio_set_value_cansleep(rstn, 1);
+ gpiod_set_value_cansleep(rstn, 1);
usleep_range(120, 240);
}
@@ -1682,7 +1650,7 @@ MODULE_DEVICE_TABLE(spi, at86rf230_device_id);
static struct spi_driver at86rf230_driver = {
.id_table = at86rf230_device_id,
.driver = {
- .of_match_table = of_match_ptr(at86rf230_of_match),
+ .of_match_table = at86rf230_of_match,
.name = "at86rf230",
},
.probe = at86rf230_probe,
diff --git a/include/linux/spi/at86rf230.h b/include/linux/spi/at86rf230.h
deleted file mode 100644
index d278576ab692..000000000000
--- a/include/linux/spi/at86rf230.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * AT86RF230/RF231 driver
- *
- * Copyright (C) 2009-2012 Siemens AG
- *
- * Written by:
- * Dmitry Eremin-Solenikov <dmitry.baryshkov@...mens.com>
- */
-#ifndef AT86RF230_H
-#define AT86RF230_H
-
-struct at86rf230_platform_data {
- int rstn;
- int slp_tr;
- int dig2;
- u8 xtal_trim;
-};
-
-#endif
--
2.39.0
Powered by blists - more mailing lists