[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230126210648.1668178-1-arnd@kernel.org>
Date: Thu, 26 Jan 2023 22:05:59 +0100
From: Arnd Bergmann <arnd@...nel.org>
To: Wei Fang <wei.fang@....com>, Jakub Kicinski <kuba@...nel.org>
Cc: Arnd Bergmann <arnd@...db.de>, Shenwei Wang <shenwei.wang@....com>,
Clark Wang <xiaoning.wang@....com>,
NXP Linux Team <linux-imx@....com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>, Andrew Lunn <andrew@...n.ch>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] [v2] fec: convert to gpio descriptor
From: Arnd Bergmann <arnd@...db.de>
The driver can be trivially converted, as it only triggers the gpio
pin briefly to do a reset, and it already only supports DT.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
v2 changes, suggested by Andrew Lunn:
- reorder header inclusions,
- use dev_err_probe()
---
drivers/net/ethernet/freescale/fec_main.c | 25 ++++++++---------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 5ff45b1a74a5..2716898e0b9b 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -56,12 +56,12 @@
#include <linux/fec.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/regulator/consumer.h>
#include <linux/if_vlan.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/gpio/consumer.h>
#include <linux/prefetch.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
@@ -4035,10 +4035,11 @@ static int fec_enet_init(struct net_device *ndev)
#ifdef CONFIG_OF
static int fec_reset_phy(struct platform_device *pdev)
{
- int err, phy_reset;
+ struct gpio_desc *phy_reset;
bool active_high = false;
int msec = 1, phy_post_delay = 0;
struct device_node *np = pdev->dev.of_node;
+ int err;
if (!np)
return 0;
@@ -4048,12 +4049,6 @@ static int fec_reset_phy(struct platform_device *pdev)
if (!err && msec > 1000)
msec = 1;
- phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
- if (phy_reset == -EPROBE_DEFER)
- return phy_reset;
- else if (!gpio_is_valid(phy_reset))
- return 0;
-
err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
/* valid reset duration should be less than 1s */
if (!err && phy_post_delay > 1000)
@@ -4061,20 +4056,18 @@ static int fec_reset_phy(struct platform_device *pdev)
active_high = of_property_read_bool(np, "phy-reset-active-high");
- err = devm_gpio_request_one(&pdev->dev, phy_reset,
- active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
- "phy-reset");
- if (err) {
- dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
- return err;
- }
+ phy_reset = devm_gpiod_get(&pdev->dev, "phy-reset",
+ active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
+ if (IS_ERR(phy_reset))
+ return dev_err_probe(&pdev->dev, PTR_ERR(phy_reset),
+ "failed to get phy-reset-gpios\n");
if (msec > 20)
msleep(msec);
else
usleep_range(msec * 1000, msec * 1000 + 1000);
- gpio_set_value_cansleep(phy_reset, !active_high);
+ gpiod_set_value_cansleep(phy_reset, !active_high);
if (!phy_post_delay)
return 0;
--
2.39.0
Powered by blists - more mailing lists