| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230130080714.139492-3-o.rempel@pengutronix.de>
Date: Mon, 30 Jan 2023 09:07:01 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Woojung Huh <woojung.huh@...rochip.com>,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Arun.Ramadoss@...rochip.com
Subject: [PATCH net-next v3 02/15] net: phy: add genphy_c45_read_eee_abilities() function
Add generic function for EEE abilities defined by IEEE 802.3
specification. For now following registers are supported:
- IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20)
- IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
(Register 1.2295)
Since I was not able to find any flag signaling support of this
registers, we should detect link mode abilities first and then based on
this abilities doing EEE link modes detection.
Results of EEE ability detection will be stored in to new variable
phydev->supported_eee.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
drivers/net/phy/phy-c45.c | 49 ++++++++++++++++++++++++++++++++++++
drivers/net/phy/phy_device.c | 16 ++++++++++++
include/linux/mdio.h | 17 +++++++++++++
include/linux/phy.h | 5 ++++
4 files changed, 87 insertions(+)
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index cff83220595c..03af19796848 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -661,6 +661,55 @@ int genphy_c45_read_mdix(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(genphy_c45_read_mdix);
+/**
+ * genphy_c45_read_eee_abilities - read supported EEE link modes
+ * @phydev: target phy_device struct
+ *
+ * Read supported EEE link modes.
+ */
+int genphy_c45_read_eee_abilities(struct phy_device *phydev)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(common);
+ int val;
+
+ linkmode_and(common, phydev->supported, PHY_EEE_100_10000_FEATURES);
+ /* There is not indicator if optional register
+ * "EEE control and capability 1" (3.20) is supported. Read it only
+ * on devices with appropriate linkmodes.
+ */
+ if (!linkmode_empty(common)) {
+ /* IEEE 802.3-2018 45.2.3.10 EEE control and capability 1
+ * (Register 3.20)
+ */
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
+ if (val < 0)
+ return val;
+
+ mii_eee_100_10000_adv_mod_linkmode_t(phydev->supported_eee, val);
+
+ /* Some buggy devices claim not supported EEE link modes */
+ linkmode_and(phydev->supported_eee, phydev->supported_eee,
+ phydev->supported);
+ }
+
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+ phydev->supported)) {
+ /* IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
+ * (Register 1.2295)
+ */
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10T1L_STAT);
+ if (val < 0)
+ return val;
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+ phydev->supported_eee,
+ val & MDIO_PMA_10T1L_STAT_EEE);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_read_eee_abilities);
+
/**
* genphy_c45_pma_read_abilities - read supported link modes from PMA
* @phydev: target phy_device struct
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 0d371a0a49f2..698549ef2981 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -132,6 +132,18 @@ static const int phy_10gbit_full_features_array[] = {
ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
};
+static const int phy_eee_100_10000_features_array[6] = {
+ ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+ ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+};
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_100_10000_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_eee_100_10000_features);
+
static void features_init(void)
{
/* 10/100 half/full*/
@@ -213,6 +225,10 @@ static void features_init(void)
linkmode_set_bit_array(phy_10gbit_fec_features_array,
ARRAY_SIZE(phy_10gbit_fec_features_array),
phy_10gbit_fec_features);
+ linkmode_set_bit_array(phy_eee_100_10000_features_array,
+ ARRAY_SIZE(phy_eee_100_10000_features_array),
+ phy_eee_100_10000_features);
+
}
void phy_device_free(struct phy_device *phydev)
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 220f3ca8702d..ea4f7d08d1a6 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -410,6 +410,23 @@ static inline u32 linkmode_adv_to_mii_t1_adv_m_t(unsigned long *advertising)
return result;
}
+static inline void mii_eee_100_10000_adv_mod_linkmode_t(unsigned long *adv,
+ u32 val)
+{
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ adv, val & MDIO_EEE_100TX);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ adv, val & MDIO_EEE_1000T);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+ adv, val & MDIO_EEE_10GT);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+ adv, val & MDIO_EEE_1000KX);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+ adv, val & MDIO_EEE_10GKX4);
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+ adv, val & MDIO_EEE_10GKR);
+}
+
int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
int __mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum,
diff --git a/include/linux/phy.h b/include/linux/phy.h
index b3cf1e08e880..42a4a5d66472 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -52,6 +52,7 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_fec_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_100_10000_features) __ro_after_init;
#define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features)
#define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features)
@@ -62,6 +63,7 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_ini
#define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features)
#define PHY_10GBIT_FEC_FEATURES ((unsigned long *)&phy_10gbit_fec_features)
#define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features)
+#define PHY_EEE_100_10000_FEATURES ((unsigned long *)&phy_eee_100_10000_features)
extern const int phy_basic_ports_array[3];
extern const int phy_fibre_port_array[1];
@@ -684,6 +686,8 @@ struct phy_device {
__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
/* used with phy_speed_down */
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old);
+ /* used for eee validation */
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported_eee);
/* Host supported PHY interface types. Should be ignored if empty. */
DECLARE_PHY_INTERFACE_MASK(host_interfaces);
@@ -1745,6 +1749,7 @@ int genphy_c45_an_config_aneg(struct phy_device *phydev);
int genphy_c45_an_disable_aneg(struct phy_device *phydev);
int genphy_c45_read_mdix(struct phy_device *phydev);
int genphy_c45_pma_read_abilities(struct phy_device *phydev);
+int genphy_c45_read_eee_abilities(struct phy_device *phydev);
int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev);
int genphy_c45_read_status(struct phy_device *phydev);
int genphy_c45_baset1_read_status(struct phy_device *phydev);
--
2.30.2
Powered by blists - more mailing lists