| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <703df816-e7bf-dfef-4a55-6fd784f5854c@ti.com>
Date: Wed, 1 Feb 2023 16:40:17 +0530
From: Md Danish Anwar <a0501179@...com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
MD Danish Anwar <danishanwar@...com>,
"Andrew F. Davis" <afd@...com>, Tero Kristo <t-kristo@...com>,
Suman Anna <s-anna@...com>, Roger Quadros <rogerq@...nel.org>,
YueHaibing <yuehaibing@...wei.com>,
Vignesh Raghavendra <vigneshr@...com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
"Jakub Kicinski" <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>, <andrew@...n.ch>
CC: <nm@...com>, <ssantosh@...nel.org>, <srk@...com>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<netdev@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [EXTERNAL] Re: [PATCH v3 1/2] dt-bindings: net: Add ICSSG
Ethernet Driver bindings
Hi Krzysztof,
On 23/12/22 17:01, Krzysztof Kozlowski wrote:
> On 23/12/2022 12:09, MD Danish Anwar wrote:
>> From: Puranjay Mohan <p-mohan@...com>
>>
>> Add a YAML binding document for the ICSSG Programmable real time unit
>> based Ethernet driver. This driver uses the PRU and PRUSS consumer APIs
>> to interface the PRUs and load/run the firmware for supporting ethernet
>> functionality.
>>
>> Signed-off-by: Puranjay Mohan <p-mohan@...com>
>> Signed-off-by: Md Danish Anwar <danishanwar@...com>
>> ---
>> .../bindings/net/ti,icssg-prueth.yaml | 174 ++++++++++++++++++
>> 1 file changed, 174 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
>> new file mode 100644
>> index 000000000000..7659f5fd3132
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
>> @@ -0,0 +1,174 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title:
>> + Texas Instruments ICSSG PRUSS Ethernet
>
> Keep it in one line.
>
Sure, I'll do it.
>> +
>> +maintainers:
>> + - Puranjay Mohan <p-mohan@...com>
>> + - Md Danish Anwar <danishanwar@...com>
>> +
>> +description:
>> + Ethernet based on the Programmable Real-Time
>> + Unit and Industrial Communication Subsystem.
>> +
>> +allOf:
>> + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - ti,am654-icssg-prueth # for AM65x SoC family
>> +
>> + sram:
>> + description:
>> + phandle to MSMC SRAM node
>
> Where does the definition of this come from? If from nowhere, usually
> you need vendor prefix and type/ref.
>
It is phandle to sram node in SoC DT file. I'll change it to ti,sram as it is
TI specific. I'll also add $ref: /schemas/types.yaml#/definitions/phandle
>> +
>> + dmas:
>> + maxItems: 10
>> +
>> + dma-names:
>> + items:
>> + - const: tx0-0
>> + - const: tx0-1
>> + - const: tx0-2
>> + - const: tx0-3
>> + - const: tx1-0
>> + - const: tx1-1
>> + - const: tx1-2
>> + - const: tx1-3
>> + - const: rx0
>> + - const: rx1
>> +
>> + ethernet-ports:
>> + type: object
>> + properties:
>> + '#address-cells':
>> + const: 1
>> + '#size-cells':
>> + const: 0
>> +
>> + patternProperties:
>> + ^port@[0-1]$:
>> + type: object
>> + description: ICSSG PRUETH external ports
>> +
>> + $ref: ethernet-controller.yaml#
>> +
>> + unevaluatedProperties: false
>> + additionalProperties: false
>
> You cannot have both. Did you test the binding? I doubt it...
>
Sorry, must have missed it in testing. I will remove additionalProperties and
just keep unevaluatedProperties.
>> + properties:
>> + reg:
>> + items:
>> + - enum: [0, 1]
>> + description: ICSSG PRUETH port number
>> +
>> + ti,syscon-rgmii-delay:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + description:
>> + phandle to system controller node and register offset
>> + to ICSSG control register for RGMII transmit delay
>
> You need to describe the items. And in your own bindings from TI you
> will even find example...
>
Sure. I'll describe the items for this.
>> +
>> + required:
>> + - reg
>> +
>> + ti,mii-g-rt:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description: |
>> + phandle to MII_G_RT module's syscon regmap.
>> +
>> + ti,mii-rt:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description: |
>> + phandle to MII_RT module's syscon regmap
>
> Why do you have so many phandles? Aren't you missing some phys?
>
That is because control bits were sprinkled around System Control register so
we need to use syscon regmap to access them.
>> +
>> + interrupts:
>> + minItems: 2
>
> Drop minItems
>
Sure. I'll drop minItems.
>> + maxItems: 2
>> + description: |
>> + Interrupt specifiers to TX timestamp IRQ.
>> +
>> + interrupt-names:
>> + items:
>> + - const: tx_ts0
>> + - const: tx_ts1
>> +
>> +required:
>> + - compatible
>> + - sram
>> + - ti,mii-g-rt
>
> Keep same order as in properties:.
>
Sure, I will make sure it has same order as in properties.
>> + - dmas
>> + - dma-names
>> + - ethernet-ports
>> + - interrupts
>> + - interrupt-names
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> +
>
> No need for blank line.
>
I'll remove this blank line.
>> + /* Example k3-am654 base board SR2.0, dual-emac */
>> + pruss2_eth: pruss2_eth {
>
> No underscores in node names.
>
> Node names should be generic.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
I will change the node name 'pruss2_eth' to generic for example 'ethernet'.
>> + compatible = "ti,am654-icssg-prueth";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&icssg2_rgmii_pins_default>;
>> + sram = <&msmc_ram>;
>> +
>> + ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
>> + <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
>> + firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf",
>> + "ti-pruss/am65x-rtu0-prueth-fw.elf",
>> + "ti-pruss/am65x-txpru0-prueth-fw.elf",
>> + "ti-pruss/am65x-pru1-prueth-fw.elf",
>> + "ti-pruss/am65x-rtu1-prueth-fw.elf",
>> + "ti-pruss/am65x-txpru1-prueth-fw.elf";
>
> I really doubt it was tested... and maybe there will be no testing from
> Rob's bot due to dependency.
>
> Please post dt_binding_check testing results.
>
I had run dt_binding check before posting, must have missed these errors. I
will be careful to check for this errors before posting patches.
I will post new revision after doing the above mentioned changes. I will make
sure to do testing properly.
> Best regards,
> Krzysztof
>
--
Thanks and Regards,
Danish.
Powered by blists - more mailing lists